an additional 1GB RAM to each node.
Another bootable mirrored disk drive.
A 10/100/1000 GB Ethernet adapter to be attached to a redundant switch.
Nothing,because this is a viable cluster solution with no single points of failure.
第1题:
An administrator is configuring RAID 1 in a server. The administrator has been given two matching 80GB SATA-2 hard drives, two SATA-2 cables, and a SATA-2 RAID adapter. How should the administrator BEST configure these drives?()
第2题:
A system administrator has been instructed to attach storage in their client LPARs, in a Power 770, with fibre channel adapters using N_port ID virtualization (NPIV). Which of the following partitions has the minimum requirements to utilize virtual fibre channel?()
第3题:
A customer has a requirement for a single AIX LPAR to be highly available. The customer only has enough funding to purchase a single system. Which would be the most critical option to mitigate AIX availability?()
第4题:
An enterprise has two nodes: -Node ’A’ runs a large relational database and ha six CPUs and 32GB of memory. -Node ’B’ is an application server with three CPU’s and 16GB of memory. During peak production periods, the CPU load for Node ’A’ is normally between 30% and 40%. For Node ’B’, the CPU load is 10% to 20% during peak production periods. Which of the following describes the best solution for an HACMP cluster?()
第5题:
Company.com is having trouble installing a fresh AIX image onto a newly defined partition on a p5-520. The assignment of the adapters to the each of the partitions is as follows: Fibre Channel Card 01 - partition one - required Fibre Channel Card 02 - partition one - required SCSI adapter 01 - partition one - desired IDE adapter 01 - partition one - required Ethernet adapter 01 - partition one - required Ethernet adapter 01 - partition two - required SCSI adapter 02 - partition two - required IDE adapter 01 - partition two - desired Which of the following actions will enable the installation of the AIX image?()
第6题:
Company.com has I/O slot constraints on two nodes that are going to be configured in an HACMP cluster. There is room for only one Network Interface Card in each node,in addition to the built-in Ethernet port on the system planer. The best HACMP configuration for these servers is to implement:()
第7题:
Would 10/100 Ethernets work as well?
Should there be eight fibre channel adapters?
Should there be an async adapter for heartbeat?
Will all LPARs need access to a common fibre channel tape drive?
第8题:
One fibre channel switch
Two fibre channel switches
Two Ethernet cards
Nothing
第9题:
an additional 1GB RAM to each node.
Another bootable mirrored disk drive.
A 10/100/1000 GB Ethernet adapter to be attached to a redundant switch.
Nothing,because this is a viable cluster solution with no single points of failure.
第10题:
Install only two modules as the RAM has to be installed in pairs
Purchase one additional RAM module to make it even. Three modules will function as triplechannel and the additional module will be for parity
Purchase dual channel memory. The triple channel memory may be incompatible with theserver motherboard
Install the RAM.Two modules will perform as dual channel and one as single channel
第11题:
Add two HMCs with two Ethernet adapters each and run EtherChannel for the original eight partitions.
Add two HMCs with two Ethernet adapters each and run Virtual Ethernet for the original eight partitions.
Add two hosting partitions with two Ethernet adapters each and run EtherChannel for the original eight partitions.
Add two hosting partitions with two Ethernet adapters each and run Virtual Ethernet for the original eight partitions.
第12题:
A single adapter network using the Network Interface Card in each node
A single adapter network using persistent addresses on the Network Interface Card in each node
A dual adapter network using the internal Ethernet adapters as an non-service interface with IPAT via IP Replacement.
EtherChannel high availability for the network connections with HACMP cascading resource groups for data and application fallover
第13题:
A customer has defined their server needs as a four-LPAR 16-way p570 with 64GB of memory, four 10/100/1000 TX LAN adapters, and six fibre channel adapters to external storage in an IBM ESS (Shark). They like the idea of being able to do SAN maintenance while not incurring downtime. If all LPARs are production related and similar, which question is most appropriate for the pSeries technical specialist to ask?()
第14题:
Company.com has non-IBM fibre attached storage. The storage is connected to a node in the cluster that has multiple adapters and virtual paths. There is a concern about detecting the loss of one of the fibre adapters since there is no indication to the administrator that one has failed. What feature of HACMP can be sued to assist with this issue?()
第15题:
A cluster administrator has been asked to install HACMP on two nodes with the following hardware: -two CPUs, - 1GB RAM, - one 1 36GB drive, -two 10/100/1000 Ethernet adapters, and -GB Fibre Channel adapters dual attached to SAN storage. In order to eliminate single points of failure,the administrator should first add which of the following:()
第16题:
During an HACMP migration,two nodes of a four-node cluster have been migrated. The existing hardware of the remaining two nodes do not meet the pre-requisites of the HACMP level that is being installed. Which of the following is the best method for resolving this issue?()
第17题:
A customer is purchasing a 12-way p5-570 to run light development workloads on eight AIX 5.3 partitions with two network adapters each. When the current network configuration was reviewed, it was discovered that they only have four Ethernet ports available on their network switch. Which of the following solutions would prevent them from having to buy another network switch or hub?()
第18题:
Upgrade the unsupported hardware and continue with the migration.
Restore the two nodes that have been migrated with a cluster snapshot.
Restore the two nodes that have not been migrated with a cluster snapshot.
Synchronize the cluster to allow the nodes that didn’t migrate to join the cluster.
第19题:
SAN switches
Fibre channel Hub(s)
IBM Storage Manager Agents
IBM Subsystem Device Driver
第20题:
LPAR-A with 1Gb FC HBA and SAN connection
LPAR-B with 2Gb FC HBA and SAN connection
LPAR-C with 4Gb FC HBA and SAN connection
LPAR-D with 8Gb FC HBA and SAN connection
第21题:
Change the IDE adapter from desired to required in partition two and restart the partition to release the resource.
Purchase a SCSI DVD-ROM drive to connect to the SCSI adapter in partition two.
Purchase an LTO tape drive so that a system image backup can be created to install a new AIX partition.
Change the IDE adapter from required to desired in partition one and restart the partition to release the resource.
第22题:
Disk heartbeat
Error notification
Event notification
Application monitor
第23题:
Install one drive on the first channel and install the second drive on the second channel.
Install one drive on the first cable, on the first channel. Install the second drive on the secondcable, on the second channel.
Install both drives on the same channel. Cable both drives as the primary master on the samecable.
Install both drives on the same channel. On the same cable one drive should be set as primaryslave and the other drive as the primary master.
第24题:
Two cluster with two resource groups in a mutual takeover configuration.
One cluster with two cascading resource groups in a mutual takeover configuration.
One cluster with two rotating resource groups in a one-sided hot standby configuration.
Two clusters with two resource groups in a hot-standby configuration with a newly acquired third node.