Use either s1 or s2 port configured as a TTY interface with a NULL Modem cable.
Use the s2 serial port on each system configured as a TTY interface with a NULL modem cable.
Use the s1 port on each system configured as a TTY interface with a standard serial modemcable.
Verify with IBM support which native serial ports for the server model can be used for HACM pheartbeats.
第1题:
A customer has an existing rack environment with 18 x365 and 2 x255 servers. How can the customer monitor and manage the hardware even if the systems are shut down?()
第2题:
During Company.com planning session,Company.com presents the details of the current Network design. The network design serves four separate company facilities, each on as separate subnet. As part of a disaster recovery plan, the customer is evaluating the use of HACMP. Specifically, the have reviewed IPAT via IP aliasing and are questioning the number of IP subnets required. Given the customer’s current configuration,what is the recommended minimum number of IP subnets that would be required?()
第3题:
During a planning session, Company.com expresses concern about the behavior of the nodes When HACMP is installed. Once department is reliant on an older piece of equipment that is critical to operations and must communicate to the database server. Previous network changes indicated that this piece of equipment does not support gratuitous ARP. How can HACMP best incorporate this restriction into the cluster design?()
第4题:
The administration staff of a large computer complex is resisting the installation of HACMP. There Are concerns about the difficulty of managing and administering an HACMP cluster without an "administration only" network. Adding adapters to create an administration network is not possible due to limitations on the number of open IO slots in the servers. What can be done to address this issue?()
第5题:
During an internal IT organization planning session, it is decided that a new cluster node would Enhance the performance of a distributed corporate application. Planning details have been assigned to the administrator. System outages are limited to one weekend per month; therefore, availability will be a key issue in the planning process. How much cluster downtime will need to be allocated for adding a new node?()
第6题:
Use a process monitor that restarts the named processes in the original start order.
Use the defined application start and stop scripts to control the application if there is a failure.
Use multiple application monitors for this resource group to enable the monitoring of the specific components of the resource group.
Use application cleanup and restart scripts designed to determine the state of the various components of the application and start only the parts required.
第7题:
The serial port is malfunctioning and needs to be repaired.
The baud rate is incorrectly specified in the AIX devices configuration.
The serial port is not a port approved to support HACMP heartbeat traffic.
The baud rate is incorrectly specified in the HACMP interface configuration.
第8题:
Enable routed to handle dynamic route creation.
Use IPAT via IP aliasing and define the required MAC address.
Add the Service IP Label to the /etc/cluster/ping_client_list.
Use IPAT via IP replacement and define the required MAC address.
第9题:
Verify that different native VLANs exist between two switches for security purposes.
Verify that the VLAN was added on all switches with the use of the show vlan command.
Verify that the switch is configured to allow for trunking on the switch ports.
Verify that each switch port has the correct IP address space assigned to it for the new VLAN.
第10题:
Create HACMP persistent IP labels for administration purposes.
Use HWAT to ensure the correct MAC address is available at all times.
Nothing can be done because RPAT is a characteristic of HACMP that cannot be changed.
Use IP aliasing within HACMP to allow the administrators constant access to the nodes.
第11题:
Add hardware to provide either serial heartbeats or shared disk heartbeats.
Define the administration network so HACMP will send heartb4eats over the non-routed network.
Add the administration network adapters to the production resource groups with IPAT via IP replacement selections.
Configure the IP Network Interface Module in HACMP with an increased heartbeat detection rate to prevent node isolation confutations.
第12题:
Only the heartbeat IP network can exist in a VPN style network.
HACMp must have separate VPN’s for all ’non-service’ and ’service’ adapter networks.
If a VPN is used for IP traffic the heartbeating must be done over disk connections.
HACMP can exist in a VPN network environment,but special considerations must be addressed.
第13题:
An HACMP cluster is planned for two logical partitions on IBM p690 servers. Both partitions have three network interface adapters: two service adapters on a production network connected to an IP switch, and an administration adapter on a stand-alone hub that is connected to the p690 server’s HMC. Non-IP hearbeat paths cannot be configured due to the available hardware in the p690 servers. Given the resources available,what is the best configuration for this cluster?()
第14题:
A customer needs both a database and application server to communicate over a network. The new systems will be connected to the same network as the current IBM equipment with known IBM serial numbers. How could a pSeries technical specialist best determine which type of network card is appropriate, without making an additional call to the customer?()
第15题:
During Company.com planning session, the network administrator discusses the requirements of having a persistent MAC address associated with the IP Service address. How can this be accomplished using HACMP?()
第16题:
Company.com is adding HACMP to an existing pair of nodes. One node is using EtherChannel with only one adapter. The other node is using regular Ethernet connection to the switch. The customer is going to increase the number of network interfaces to two for each node. What other considerations need to be addressed in a HACMP environment?()
第17题:
Company.com has an application that requires a serial connection for Electronic Data Interchange. What must be done to integrator the serial connection into an HACMP cluster?()
第18题:
Make changes and allows Lazy Update to sync the changes later.
Use the Cluster Single Point Of Control to manage LVM changes.
Use exportvg on the primary node and improtvg on the second node.
Set up a local NFS cross-mount, and use the local filesystem until the outage.
第19题:
Al interfaces used for HACMP heartbeats must be identical. Differences in the interfaces will cause heartbeat failure.
The network interfaces should all be configured with the same frame type. The use of regular Ethernet frames is mandatory.
Network interfaces for HACMP must be all the same,Ethernet or 802.3. It does not matter which,as long as they are all the same.
HACMP can use any network interface supported by AIX. The options on the various interfaces are masked by the Ethernet switch and do not affect HACMP.
第20题:
4
5
6
8
第21题:
None,everything can be done with the cluster active.
Minimal downtime will be required to import the volume groups.
Several hours are required for testing before final synchronization.
Minimal downtime will be required to connect and test the serial network.
第22题:
Use an RS3232/422 serial Y cable.
Alter the device settings to 9600 8/n/1 xon/xoff.
Use a network based terminal server for the serial connection.
Nothing because HACMP does not support native serial connection fallovers.
第23题:
More disk should be added to the disk heartbeat network,allowing more paths for heartbeats.
An RS232 network is required to supply a more robust non-IP network when disk heartbeating is implemented.
The network tunable parameters should be changed to allow more missed heartbeats since the disks may be heavily used.
An error notification method is required to determine the action to take in response to a failure of the disk heartbeat.