单选题Company.com has a two-node HACMP cluster with a single cascading resource group. Node ’A’  is the normal production node， and Node ’B’ is the standby node. One of the first steps in the HACMP test plan is to start the cluster and to verify that al elem

题目
单选题
Company.com has a two-node HACMP cluster with a single cascading resource group. Node ’A’  is the normal production node， and Node ’B’ is the standby node. One of the first steps in the HACMP test plan is to start the cluster and to verify that al elements for the resource group have been acquired. The administrator who is conducting the HACMP test starts the HACMP daemons on Node ’B’ with the ’smitty clstart" command. The administrator notices that Node ’B’ acquires the elements of the resource group， including a service IP labels，a shared volume group， and an application server that has been started. The expectation was that Node ’B’ would enter the cluster in a standby status， rather than acquiring production resources.  What should the administrator do to correct this problem？（）
A

 Change the cluster to a rotating design.

B

 Change the Cascading without Fallback flag to true.

C

 Change the Inactive Takeover field to false in the cluster configuration.

D

 Nothing should be done. This is the default behavior for cascading resource groups，and node ’A’ should have been started first.

相似考题

1. A new HACMP maintenance level has recently been released. An administrator is creating a  project plan that is required for applying the updates for a three-node production cluster.  To minimize downtime，what is the best way to accomplish the updates on all cluster nodes？（）  A、 Perform a graceful takeover one node at a time and apply the updates.B、 Perform the updates on all nodes simultaneously using C-SPOC utilities.C、 Perform the updates on node at a time with the cluster software active.D、 Perform a graceful stop of all cluster nodes and apply updates to all nodes.

2. Company.com has a three-node cluster （Node ’A’， Node ’B’， and Node ’C’） with three resource  Groups （rg1， rg2， and rg3）. Node ’A’ has twice as many CPUs and twice as much memory as the two test add development Nodes ’B’ and ’C’. During normal production processing， all resource groups are active on Node ’A’.  What is most efficient way to configure the cluster to manage the workload？（）   A、 Use thee cascading resource groups where ’rg1’ and ’rg2’ fallover to Node ’B’ and ’rg3’ falls over to Node ’C’B、 Use Dynamic Node Priority resource groups with a priority chain consisting of Node ’A’ then Node ’B’ then Node ’C’C、 Use three rotating resource groups with ’rg1’ and ’rg2’ falling over to node ’B’ and ’rg3’ falling over to Node ’C’D、 Upgrade Nodes ’B’ and ’C’ to be equal to Node ’A in CPU and memory resources to enable the cluster to synchronize three resource groups

3.Company.com has a six-node concurrent resource group with an application that is accessed by  a web connection to the cluster nodes. How is the workload moved to another cluster node during a node failure？（）  A、 The concurrent application must control the web interface through application monitoring.B、 A second resource group will be required to move the web application and IP label to a new node during a node failure.C、 The concurrent resource group can support multiple IP labels through IP aliasing so all IP labels are defined in the concurrent resource group.D、 The dynamic node priority facility in HACMP will relocate the web application and the IP label，if it is correctly defined in the application start and stop script.

4. A customer has a resource group rg1 configured on a two node cluster with the following policies：The customer has observed the following scenarios as nodes join the cluster during cluster start up. Scenario 1 Node1 joins cluster as first node - rg1 is acquired by Node1 Node2 joins cluster as second node - rg1 ismoved from Node1 to Node2 Scenario 2 Node2 joins cluster as first node - rg1 is acquired by Node2 Node1 joins cluster as second node - rg1 remainson Node2 Which of the following is the reason for this behavior？（）A、rg1 is configured with a delayed fallback timerB、Settling time policy has not been configured for rg1C、Node1 does not have sufficient resources to support rg1D、Node2 is the first in the ’Default Node Priority’ list for resource group rg1

更多“单选题Company.com has a two-node HACMP cluster with a single cascading resource group. Node ’A’  is the normal production node， and Node ’B’ is the standby node. One of the first steps in the HACMP test plan is to start the cluster and to verify that al elem”相关问题

  • 第1题：

    The IP subsystem fallover behavior of a two-node cluster is being testing in a large client  organization. One of the tests is to simulate a network_down event and verify that HACMP movesthe single resource group to the standby node.  What is the best way to simulate a network down condition？（）   

    • A、 Turn off the IP core switch connecting the two nodes.
    • B、 Issue the command "stopsrc -g inetd" on the node that has the resource group.
    • C、 Issue the command "sh /etc/rc.tcpclean" on the node that has the resource group.
    • D、 Simultaneously unplug all network cables from the node that has the resource group.

    正确答案:D

  • 第2题：

    A new administrator is performing fallover testing on a two-node cluster and is concerned that the cascading resource group belonging to Node ’A’ did not reintegrate properly after the cluster was restarted on Node ’A’. A stable cluster is reported by clstat，and clRGinfo reports the resource group online on Node ’B’.  What type of configuration would cause this type of behavior？（）  

    • A、 The resource group DNP has been configured.
    • B、 The resource group option CWOF has been enabled.
    • C、 The resource group option Inactive Takeover is set.
    • D、 A resource group fallback timer has been configured.

    正确答案:B

  • 第3题：

    An enterprise has three nodes： -Node ’A’ is a production database， -Node ’B’ is a production  Application server， and -Node ’C’ is a test and development node. Node ’C’ is used by six programmers to develop and the production application as business critical and would like to make it highly available with HACMP. Application development and testing is not business critical.  Which of the following describes the best solution？（）  

    • A、 There is not an adequate solution because HACMP should not be configured in this environment without a dedicated standby node.
    • B、 Nodes ’A’ and ’B’ should be configured in a cluster with mutual fallover of two cascading resource groups to provide both nodes will deliver acceptable response time with both resource groups.
    • C、 Nodes ’A’ and ’C’ should be configured in one cluster， and Nodes ’B’ and ’C’ in another cluster to prevent both the database and application server from falling over to Node ’C’ at the same time.
    • D、 Nodes ’A’， ’B’， and ’C’ should be configured in a cluster with Node ’C’ the hot standby for both the database and application server resource groups. Workload Manager （WLM） must be configured on database and application developers from over utilizing the CPU resources.

    正确答案:B

  • 第4题：

    An enterprise has two nodes： -Node ’A’ runs a large relational database and ha six CPUs and  32GB of memory. -Node ’B’ is an application server with three CPU’s and 16GB of memory. During peak production periods， the CPU load for Node ’A’ is normally between 30% and 40%. For Node ’B’， the CPU load is 10% to 20% during peak production periods.  Which of the following describes the best solution for an HACMP cluster？（）  

    • A、 Two cluster with two resource groups in a mutual takeover configuration.
    • B、 One cluster with two cascading resource groups in a mutual takeover configuration.
    • C、 One cluster with two rotating resource groups in a one-sided hot standby configuration.
    • D、 Two clusters with two resource groups in a hot-standby configuration with a newly acquired third node.

    正确答案:B

  • 第5题：

    Company.com has a two-node HACMP cluster with a single cascading resource group. Node ’A’  is the normal production node， and Node ’B’ is the standby node. One of the first steps in the HACMP test plan is to start the cluster and to verify that al elements for the resource group have been acquired. The administrator who is conducting the HACMP test starts the HACMP daemons on Node ’B’ with the ’smitty clstart" command. The administrator notices that Node ’B’ acquires the elements of the resource group， including a service IP labels，a shared volume group， and an application server that has been started. The expectation was that Node ’B’ would enter the cluster in a standby status， rather than acquiring production resources.  What should the administrator do to correct this problem？（）   

    • A、 Change the cluster to a rotating design.
    • B、 Change the Cascading without Fallback flag to true.
    • C、 Change the Inactive Takeover field to false in the cluster configuration.
    • D、 Nothing should be done. This is the default behavior for cascading resource groups，and node ’A’ should have been started first.

    正确答案:C

  • 第6题：

    单选题
    Node ’C’ has just completed reintegration in a three-node cluster. The hacmp.out logifle displays  The event node_up_complete for Node ’C’. The cluster administrator wishes to verify that the cluster is stable.  In addition to reviewing the cluster log files，what utility should be run to verify the cluster state？（）
    A

     clstat

    B

     clinfo

    C

     cldiag

    D

     clverify


    正确答案： B
    解析： 暂无解析

  • 第7题：

    单选题
    An enterprise has three nodes： -Node ’A’ is a production database， -Node ’B’ is a production  Application server， and -Node ’C’ is a test and development node. Node ’C’ is used by six programmers to develop and the production application as business critical and would like to make it highly available with HACMP. Application development and testing is not business critical.  Which of the following describes the best solution？（）
    A

     There is not an adequate solution because HACMP should not be configured in this environment without a dedicated standby node.

    B

     Nodes ’A’ and ’B’ should be configured in a cluster with mutual fallover of two cascading resource groups to provide both nodes will deliver acceptable response time with both resource groups.

    C

     Nodes ’A’ and ’C’ should be configured in one cluster， and Nodes ’B’ and ’C’ in another cluster to prevent both the database and application server from falling over to Node ’C’ at the same time.

    D

     Nodes ’A’， ’B’， and ’C’ should be configured in a cluster with Node ’C’ the hot standby for both the database and application server resource groups. Workload Manager （WLM） must be configured on database and application developers from over utilizing the CPU resources.


    正确答案： D
    解析： 暂无解析

  • 第8题：

    单选题
    Company.com has a two-node HACMP cluster with a single cascading resource group. Node ’A’  is the normal production node， and Node ’B’ is the standby node. One of the first steps in the HACMP test plan is to start the cluster and to verify that al elements for the resource group have been acquired. The administrator who is conducting the HACMP test starts the HACMP daemons on Node ’B’ with the ’smitty clstart" command. The administrator notices that Node ’B’ acquires the elements of the resource group， including a service IP labels，a shared volume group， and an application server that has been started. The expectation was that Node ’B’ would enter the cluster in a standby status， rather than acquiring production resources.  What should the administrator do to correct this problem？（）
    A

     Change the cluster to a rotating design.

    B

     Change the Cascading without Fallback flag to true.

    C

     Change the Inactive Takeover field to false in the cluster configuration.

    D

     Nothing should be done. This is the default behavior for cascading resource groups，and node ’A’ should have been started first.


    正确答案： D
    解析： 暂无解析

  • 第9题：

    单选题
    A three-node cluster experienced a node failure. The resource groups were acquired as cexpected. The node has been repaired，and HACMP has been restarted.  How does the operator determine that the node has successfully re-integrated into the cluster？（）
    A

     Use the clstat command.

    B

     Use the cIRGinfor command.

    C

     Tail the /etc/hacmp.out file and wait for node_up_complete to finish successfully.

    D

     Tail the /usr/es/adm/cluster.log file and wait for node_up_complete to finish successfully.


    正确答案： A
    解析： 暂无解析

  • 第10题：

    单选题
    The IP subsystem fallover behavior of a two-node cluster is being testing in a large client  organization. One of the tests is to simulate a network_down event and verify that HACMP movesthe single resource group to the standby node.  What is the best way to simulate a network down condition？（）
    A

     Turn off the IP core switch connecting the two nodes.

    B

     Issue the command stopsrc -g inetd on the node that has the resource group.

    C

     Issue the command sh /etc/rc.tcpclean on the node that has the resource group.

    D

     Simultaneously unplug all network cables from the node that has the resource group.


    正确答案： B
    解析： 暂无解析

  • 第11题：

    单选题
    Company.com has a three-node cluster （Node ’A’， Node ’B’， and Node ’C’） with three resource  Groups （rg1， rg2， and rg3）. Node ’A’ has twice as many CPUs and twice as much memory as the two test add development Nodes ’B’ and ’C’. During normal production processing， all resource groups are active on Node ’A’.  What is most efficient way to configure the cluster to manage the workload？（）
    A

     Use thee cascading resource groups where ’rg1’ and ’rg2’ fallover to Node ’B’ and ’rg3’ falls over to Node ’C’

    B

     Use Dynamic Node Priority resource groups with a priority chain consisting of Node ’A’ then Node ’B’ then Node ’C’

    C

     Use three rotating resource groups with ’rg1’ and ’rg2’ falling over to node ’B’ and ’rg3’ falling over to Node ’C’

    D

     Upgrade Nodes ’B’ and ’C’ to be equal to Node ’A in CPU and memory resources to enable the cluster to synchronize three resource groups


    正确答案： A
    解析： 暂无解析

  • 第12题：

    单选题
    A customer has a resource group rg1 configured on a two node cluster with the following policies：The customer has observed the following scenarios as nodes join the cluster during cluster start up. Scenario 1 Node1 joins cluster as first node - rg1 is acquired by Node1 Node2 joins cluster as second node - rg1 ismoved from Node1 to Node2 Scenario 2 Node2 joins cluster as first node - rg1 is acquired by Node2 Node1 joins cluster as second node - rg1 remainson Node2 Which of the following is the reason for this behavior？（）
    A

    rg1 is configured with a delayed fallback timer

    B

    Settling time policy has not been configured for rg1

    C

    Node1 does not have sufficient resources to support rg1

    D

    Node2 is the first in the ’Default Node Priority’ list for resource group rg1


    正确答案： A
    解析： 暂无解析

  • 第13题：

    A three-node cluster experienced a node failure. The resource groups were acquired as cexpected. The node has been repaired，and HACMP has been restarted.  How does the operator determine that the node has successfully re-integrated into the cluster？（）  

    • A、 Use the clstat command.
    • B、 Use the cIRGinfor command.
    • C、 Tail the /etc/hacmp.out file and wait for "node_up_complete" to finish successfully.
    • D、 Tail the /usr/es/adm/cluster.log file and wait for "node_up_complete" to finish successfully.

    正确答案:A

  • 第14题：

    A step in the HACMP test plan is to gracefully stop the cluster on a node and to verify that the Shared resources fallover to the standby node. To prepare for this testing step， both nodes in the two-node cluster are in a stable state with the single resource group active on Node ’A’.  Which of the following is the best way to execute this portion of the test plan？（）  

    • A、 Execute "lssrc -g cluster stop" on Node ’A’
    • B、 Execute "cat /etc//motd >/dev/kmem" on Node ’A’
    • C、 Execute "/usr/es/sbin/cluster/utilities/sclstop -gr" on Node ’A’
    • D、 Find the pid of cluster manager daemon on Node ’A’ and issue a "kill-9" against the pid

    正确答案:C

  • 第15题：

    The first step documented in Company.com’s HACMP test plan is to start the cluster manager on the normal service node and verify that HACMP daemons have started with the ’lssrc -g cluster" command.  What daemons MUST show as active in the ’lssrc -g cluster" command to have an operational cluster？（）  

    • A、 clstrmgrES，clsmuxpdES
    • B、 topsvcsd，grpsvcsd，exaixos
    • C、 topsvcsd，grpsvcsd，clinfoES，grglsmd
    • D、 clstrmgrES，clsmuxpdES，topsvcsd，grpsvcsd

    正确答案:A

  • 第16题：

    An HACMP setting timer may used to allow：（）  

    • A、 The setting or fallback of a cluster custom resource group
    • B、 The cluster time to stabilize before starting a custom resource group
    • C、 A priority node time to acquire custom resource group at cluster start
    • D、 A fallover node time to process custom resource states to be monitored

    正确答案:C

  • 第17题：

    单选题
    An HACMP setting timer may used to allow：（）
    A

     The setting or fallback of a cluster custom resource group

    B

     The cluster time to stabilize before starting a custom resource group

    C

     A priority node time to acquire custom resource group at cluster start

    D

     A fallover node time to process custom resource states to be monitored


    正确答案： B
    解析： 暂无解析

  • 第18题：

    单选题
    A new administrator is performing fallover testing on a two-node cluster and is concerned that the cascading resource group belonging to Node ’A’ did not reintegrate properly after the cluster was restarted on Node ’A’. A stable cluster is reported by clstat，and clRGinfo reports the resource group online on Node ’B’.  What type of configuration would cause this type of behavior？（）
    A

     The resource group DNP has been configured.

    B

     The resource group option CWOF has been enabled.

    C

     The resource group option Inactive Takeover is set.

    D

     A resource group fallback timer has been configured.


    正确答案： A
    解析： 暂无解析

  • 第19题：

    单选题
    Company.com has a six-node concurrent resource group with an application that is accessed by  a web connection to the cluster nodes. How is the workload moved to another cluster node during a node failure？（）
    A

     The concurrent application must control the web interface through application monitoring.

    B

     A second resource group will be required to move the web application and IP label to a new node during a node failure.

    C

     The concurrent resource group can support multiple IP labels through IP aliasing so all IP labels are defined in the concurrent resource group.

    D

     The dynamic node priority facility in HACMP will relocate the web application and the IP label，if it is correctly defined in the application start and stop script.


    正确答案： A
    解析： 暂无解析

  • 第20题：

    单选题
    A node in a three-node cluster was started， ad it acquired the following three cascading resourcegroups：  ’rg1’， ’rg12’， and ’rg3’. The cluster design is to have ’rg1’ normally Node ’A’， ’rg2’ normally on Node ’B’， and rg3’ normally on Node ’C’.  How can the administrator reposition the resource groups and correct the problem？（）
    A

     Change the cluster resource group definitions from cascading to rotating，synchronize the cluster，and restart HACMP

    B

     Edit the /urs/es/sbin/utilities/clhosts file to reflect he desired node-to-resource group relationships and restart HACMP

    C

     Use the clRGMove utility move rg2 o Node ’B’ and rg3 to Node ’C’，then start the cluster manager on Nodes ’B’ and ’C’ with the clstart utility

    D

     Disable Inactive Node Takeover，check the node priority list in the resource groups definitions，synchronize the cluster，and start HACMP on Nodes ’B’ and ’C’


    正确答案： C
    解析： 暂无解析

  • 第21题：

    单选题
    The first step documented in Company.com’s HACMP test plan is to start the cluster manager on the normal service node and verify that HACMP daemons have started with the ’lssrc -g cluster" command.  What daemons MUST show as active in the ’lssrc -g cluster" command to have an operational cluster？（）
    A

     clstrmgrES，clsmuxpdES

    B

     topsvcsd，grpsvcsd，exaixos

    C

     topsvcsd，grpsvcsd，clinfoES，grglsmd

    D

     clstrmgrES，clsmuxpdES，topsvcsd，grpsvcsd


    正确答案： C
    解析： 暂无解析

  • 第22题：

    单选题
    An administrator has a two-node PowerHA cluster in a mutual takeover configuration. He needs to updatefrom 5.5 service pack 1 to 5.5 service pack 2. Which of the following actions will perform the updates with norisk of disruption to applications running in the cluster？（）
    A

    Unmanage resource groups on all nodes， update the cluster filesets， start cluster services on all nodes，ensure cluster services stabilize

    B

    Update the cluster filesets on all nodes. Run ’refresh -s clstrmgrES’ on one node， wait for the cluster tostabilize， repeat for all other nodes

    C

    Unmanage resource groups on one node， update the cluster filesets， start cluster services. Wait for thecluster to stabilize and repeat for all other nodes.

    D

    Bring resource groups （RGs） online on all nodes concurrently， bring RGs offline on one node， update thecluster filesets， bring RGs online， repeat for all other nodes


    正确答案： C
    解析： 暂无解析

  • 第23题：

    单选题
    An enterprise has two nodes： -Node ’A’ runs a large relational database and ha six CPUs and  32GB of memory. -Node ’B’ is an application server with three CPU’s and 16GB of memory. During peak production periods， the CPU load for Node ’A’ is normally between 30% and 40%. For Node ’B’， the CPU load is 10% to 20% during peak production periods.  Which of the following describes the best solution for an HACMP cluster？（）
    A

     Two cluster with two resource groups in a mutual takeover configuration.

    B

     One cluster with two cascading resource groups in a mutual takeover configuration.

    C

     One cluster with two rotating resource groups in a one-sided hot standby configuration.

    D

     Two clusters with two resource groups in a hot-standby configuration with a newly acquired third node.


    正确答案： A
    解析： 暂无解析

  • 第24题：

    单选题
    A step in the HACMP test plan is to gracefully stop the cluster on a node and to verify that the Shared resources fallover to the standby node. To prepare for this testing step， both nodes in the two-node cluster are in a stable state with the single resource group active on Node ’A’.  Which of the following is the best way to execute this portion of the test plan？（）
    A

     Execute lssrc -g cluster stop on Node ’A’

    B

     Execute cat /etc//motd >/dev/kmem on Node ’A’

    C

     Execute /usr/es/sbin/cluster/utilities/sclstop -gr on Node ’A’

    D

     Find the pid of cluster manager daemon on Node ’A’ and issue a kill-9 against the pid


    正确答案： C
    解析： 暂无解析

相关内容