单选题Which configuration command assigns a host route to the CPE workstation address of 192.168.10.1 in a Bridged 1483 network?（）A ip route 192.168.10.1 255.255.255.255 atm 6/2.1B ip route 192.168.10.1 255.255.255.252 atm 6/2.1C add route 192.168.10.1 255.2

题目
单选题
Which configuration command assigns a host route to the CPE workstation address of 192.168.10.1 in a Bridged 1483 network?（）
A

ip route 192.168.10.1 255.255.255.255 atm 6/2.1

B

ip route 192.168.10.1 255.255.255.252 atm 6/2.1

C

add route 192.168.10.1 255.255.255.252 atm 6/2.1

D

add route 192.168.10.1 255.255.255.255 atm 6/2.1

相似考题

1.以下配置默认路由的命令正确的是(52)。A．ip route 0.0.0.0 0.0.0.0 192.168.10.1B．ip router 0.0.0.0 0.0.0.0 192.168.10.1C．ip router 0.0.0.0 0.0.0.0 192.168.10.1D．ip route 0.0.0.0 255.255.255.255 192.168.10.1

2.You can successfully ping a Bridged 1483 customer‘s workstation from the local ERX. However, a remote ERX router in your network cannot ping that same device.What could be causing this problem?()A. incorrect DSL network redistributionB. incorrect static host route configurationC. incorrect static customer route configurationD. incorrect default static route configuration on the end user

3.Which configuration command assigns a host route to the CPE workstation address of 192.168.10.1 in a Bridged 1483 network?()A. ip route 192.168.10.1 255.255.255.255 atm 6/2.1B. ip route 192.168.10.1 255.255.255.252 atm 6/2.1C. add route 192.168.10.1 255.255.255.252 atm 6/2.1D. add route 192.168.10.1 255.255.255.255 atm 6/2.1

4.Which configuration command represents a static host route in a Routed 1483 network?()A.iproute 172.10.1.20.0.0.0 atm 6/0.33B.iproute 172.10.1.2255.255.255.0 atm 6/0.33C.iproute 172.10.1.2255.255.255.255 172.10.1.2D.iproute 172.10.1.2255.255.255.255 atm 6/0.33

参考答案和解析
正确答案： C
解析： 暂无解析
更多“单选题Which configuration command assigns a host route to the CPE workstation address of 192.168.10.1 in a Bridged 1483 network?（）A ip route 192.168.10.1 255.255.255.255 atm 6/2.1B ip route 192.168.10.1 255.255.255.252 atm 6/2.1C add route 192.168.10.1 255.2”相关问题

  • 第1题：

    Which set of configuration commands configures MBGP on the ERX Edge Router?()

    A. router bgp 100 neighbor 192.168.10.1 remote-as 200 address-family ipv4 multicast neighbor 192.168.10.1 next-hop-self

    B. router bgp 100 neighbor 192.168.10.1 remote-as 200 address-family vpnv4 multicast neighbor 192.168.10.1 activate

    C. router bgp 100 neighbor 192.168.10.1 remote-as 200 address-family ipv4 unicast neighbor 192.168.10.1 active

    D. router bgp 100 neighbor 192.168.10.1 remote-as 200 address-family ipv4 multicast neighbor 192.168.10.1 activate


    参考答案：D

  • 第2题：

    Which configuration command represents a static customer route in a Routed 1483 network?()

    A.ip route 40.40.0.0255.255.0.0 172.10.1.2

    B.ip route 40.40.0.00.0.255.255 atm 6/0.33

    C.ip route 40.40.0.00.0.255.255 172.10.1.2

    D.ip route 40.40.0.0255.255.0.0 atm 6/0.33


    参考答案：D

  • 第3题：

    You have been asked to configure a default route. Which of the IOS commands mentioned below will accomplish this task?()

    A. LTD(config)# ip route 0.0.0.0 0.0.0.0 192.168.15.36

    B. LTD(config)# ip route 0.0.0.0 192.168.15.36 255.255.255.255

    C. LTD# ip default-network 0.0.0.0 192.168.15.36 255.255.255.255

    D. LTD(config)# ip route 0.0.0.0 0.0.0.0 E0

    E. LTD(config)# ip route 0.0.0.0 255.255.255.255 S0

    F. LTD(config-router)# ip route 255.255.255.255 0.0.0.0 192.168.15.36


    参考答案：A, D

  • 第4题：

    Which configuration command assigns a host route to the CPE workstation address of 192.168.10.1 in a Bridged 1483 network?（）

    • A、ip route 192.168.10.1 255.255.255.255 atm 6/2.1
    • B、ip route 192.168.10.1 255.255.255.252 atm 6/2.1
    • C、add route 192.168.10.1 255.255.255.252 atm 6/2.1
    • D、add route 192.168.10.1 255.255.255.255 atm 6/2.1

    正确答案:A

  • 第5题：

    What does the ip access-routes configuration command accomplish?（）

    • A、It statically places a host route in the routing table.
    • B、It statically associates an IP address with a customer.
    • C、It dynamically creates a host route in the routing table.
    • D、It dynamically assigns an address to the router's interface

    正确答案:C

  • 第6题：

    You can successfully ping a Bridged 1483 customer's workstation from the local ERX. However, a remote ERX router in your network cannot ping that same device. What could be causing this problem?（）

    • A、incorrect DSL network redistribution
    • B、incorrect static host route configuration
    • C、incorrect static customer route configuration
    • D、incorrect default static route configuration on the end user

    正确答案:A

  • 第7题：

    In a Bridged 1483 network, which set of commands represent an operationally correct configuration for an ATM subinterface?（）

    • A、interface atm 6/0.33 atm pvc 33 0 33 aal5mux encapsulation bridge1483 ip unnumbered loopback0
    • B、interface atm 6/0.33 atm pvc 33 0 33 aal5snap encapsulation bridge1483 ip unnumbered loopback0
    • C、interface atm 6/0.33 atm pvc 33 0 33 aal5mux encapsulation bridge1483 ip address unnumbered loopback0
    • D、interface atm 6/0.33 atm pvc 33 0 33 aal5snap encapsulation bridge1483 ip address 0.0.0.0 255.255.255.255

    正确答案:B

  • 第8题：

    多选题
    You have been asked to configure a default route. Which of the IOS commands mentioned below will accomplish this task?（）
    A

    LTD(config)# ip route 0.0.0.0 0.0.0.0 192.168.15.36

    B

    LTD(config)# ip route 0.0.0.0 192.168.15.36 255.255.255.255

    C

    LTD# ip default-network 0.0.0.0 192.168.15.36 255.255.255.255

    D

    LTD(config)# ip route 0.0.0.0 0.0.0.0 E0

    E

    LTD(config)# ip route 0.0.0.0 255.255.255.255 S0

    F

    LTD(config-router)# ip route 255.255.255.255 0.0.0.0 192.168.15.36


    正确答案： A,D
    解析： 暂无解析

  • 第9题：

    单选题
    What does the ip access-routes configuration command accomplish?（）
    A

    It statically places a host route in the routing table.

    B

    It statically associates an IP address with a customer.

    C

    It dynamically creates a host route in the routing table.

    D

    It dynamically assigns an address to the router's interface


    正确答案： D
    解析： 暂无解析

  • 第10题：

    单选题
    You can successfully ping a Bridged 1483 customer's workstation from the local ERX. However, a remote ERX router in your network cannot ping that same device. What could be causing this problem?（）
    A

    incorrect DSL network redistribution

    B

    incorrect static host route configuration

    C

    incorrect static customer route configuration

    D

    incorrect default static route configuration on the end user


    正确答案： D
    解析： 暂无解析

  • 第11题：

    单选题
    In a Bridged 1483 network, which set of commands represent an operationally correct configuration for an ATM subinterface?（）
    A

    interface atm 6/0.33 atm pvc 33 0 33 aal5mux encapsulation bridge1483 ip unnumbered loopback0

    B

    interface atm 6/0.33 atm pvc 33 0 33 aal5snap encapsulation bridge1483 ip unnumbered loopback0

    C

    interface atm 6/0.33 atm pvc 33 0 33 aal5mux encapsulation bridge1483 ip address unnumbered loopback0

    D

    interface atm 6/0.33 atm pvc 33 0 33 aal5snap encapsulation bridge1483 ip address 0.0.0.0 255.255.255.255


    正确答案： A
    解析： 暂无解析

  • 第12题：

    单选题
    Which configuration command represents a static customer route in a Routed 1483 network?（）
    A

    ip route 40.40.0.0255.255.0.0 172.10.1.2

    B

    ip route 40.40.0.00.0.255.255 atm 6/0.33

    C

    ip route 40.40.0.00.0.255.255 172.10.1.2

    D

    ip route 40.40.0.0255.255.0.0 atm 6/0.33


    正确答案： C
    解析： 暂无解析

  • 第13题：

    In a PPP over ATM service offering,which command inserts the user's host route into the routing table?()

    A.ip host-route

    B.ip access-routes

    C.ip dynamic host-route

    D.ip route access-routes


  • 第14题：

    Refer to the exhibit diagram and config uration. RTB is summarizing its networks from AS 64100 with the aggregate - address command. However, the show ip route command on RTA reveals the RTB individual networks as well as its summary route.Which option would ensure that only the summary route would appear in the routing table of RTA?（）

    A. Add a static route with a prefix of 192.168.24.0 255.255.252.0 pointing to the null0 interface.

    B. Create a route map permitting only the summary address.

    C. Delete the four network statements and leave onl y the aggregate - address statement in the BGP configuration.

    D. Add the keyword summary - only to the aggregate - address command.


    参考答案：D

  • 第15题：

    A router receives information about network 192.168.10.0／24 from multiple sources. What will the router consider the most reliable information about the path to that network()。

    A.a directly connected interface with an address of 192.168.10.254/24

    B.a static route to network 192.168.10.0/24

    C.a RIP update for network 192.168.10.0/24

    D.an OSPF update for network 192.168.0.0/16

    E.a default route with a next hop address of 192.168.10.1

    F.a static route to network 192.168.10.0/24 with a local serial interface configured as the next hop


    参考答案：A

  • 第16题：

    Which configuration command represents a static customer route in a Routed 1483 network？（）

    • A、ip route 40.40.0.0 255.255.0.0 172.10.1.2
    • B、ip route 40.40.0.0 0.0.255.255 atm 6/0.33
    • C、ip route 40.40.0.0 0.0.255.255 172.10.1.2
    • D、ip route 40.40.0.0 255.255.0.0 atm 6/0.33

    正确答案:D

  • 第17题：

    Which configuration command represents a static host route in a Routed 1483 network？（）

    • A、iproute 172.10.1.20.0.0.0 atm 6/0.33
    • B、iproute 172.10.1.2255.255.255.0 atm 6/0.33
    • C、iproute 172.10.1.2255.255.255.255 172.10.1.2
    • D、iproute 172.10.1.2255.255.255.255 atm 6/0.33

    正确答案:D

  • 第18题：

    In a PPP over ATM service offering,which command inserts the user's host route into the routing table?（）

    • A、ip host-route
    • B、ip access-routes
    • C、ip dynamic host-route
    • D、ip route access-routes

    正确答案:B

  • 第19题：

    Which configuration command represents a static customer route in a Routed 1483 network?（）

    • A、ip route 40.40.0.0255.255.0.0 172.10.1.2
    • B、ip route 40.40.0.00.0.255.255 atm 6/0.33
    • C、ip route 40.40.0.00.0.255.255 172.10.1.2
    • D、ip route 40.40.0.0255.255.0.0 atm 6/0.33

    正确答案:D

  • 第20题：

    单选题
    Which configuration command represents a static host route in a Routed 1483 network？（）
    A

    iproute 172.10.1.20.0.0.0 atm 6/0.33

    B

    iproute 172.10.1.2255.255.255.0 atm 6/0.33

    C

    iproute 172.10.1.2255.255.255.255 172.10.1.2

    D

    iproute 172.10.1.2255.255.255.255 atm 6/0.33


    正确答案： D
    解析： 暂无解析

  • 第21题：

    单选题
    Which configuration command represents a static customer route in a Routed 1483 network？（）
    A

    ip route 40.40.0.0 255.255.0.0 172.10.1.2

    B

    ip route 40.40.0.0 0.0.255.255 atm 6/0.33

    C

    ip route 40.40.0.0 0.0.255.255 172.10.1.2

    D

    ip route 40.40.0.0 255.255.0.0 atm 6/0.33


    正确答案： A
    解析： 暂无解析

  • 第22题：

    单选题
    A router receives information about network 192.168.10.0/24 from multiple sources. What will the router consider the most reliable information about the path to that network（）。
    A

    a directly connected interface with an address of 192.168.10.254/24

    B

    a static route to network 192.168.10.0/24

    C

    a RIP update for network 192.168.10.0/24

    D

    an OSPF update for network 192.168.0.0/16

    E

    a default route with a next hop address of 192.168.10.1

    F

    a static route to network 192.168.10.0/24 with a local serial interface configured as the next hop


    正确答案： F
    解析： 暂无解析

  • 第23题：

    单选题
    Which set of configuration commands configures MBGP on the ERX Edge Router?（）
    A

    router bgp 100 neighbor 192.168.10.1 remote-as 200 address-family ipv4 multicast neighbor 192.168.10.1 next-hop-self

    B

    router bgp 100 neighbor 192.168.10.1 remote-as 200 address-family vpnv4 multicast neighbor 192.168.10.1 activate

    C

    router bgp 100 neighbor 192.168.10.1 remote-as 200 address-family ipv4 unicast neighbor 192.168.10.1 active

    D

    router bgp 100 neighbor 192.168.10.1 remote-as 200 address-family ipv4 multicast neighbor 192.168.10.1 activate


    正确答案： C
    解析： 暂无解析

相关内容