单选题要在Windows 2000 Professional中对未分配空间进行分区，需使用（）A Partition ManagementB CONVERTC Disk AdministratorD Disk Management

题目
单选题
要在Windows 2000 Professional中对未分配空间进行分区，需使用（）
A

Partition Management

B

CONVERT

C

Disk Administrator

D

Disk Management

相似考题

1.要在Windows 2000 Professional中对未分配空间进行分区,需使用()A.Partition ManagementB.CONVERTC.Disk AdministratorD.Disk Management

2.You are the network administrator for Ezonexam. You are installing Windows 2000 Server on a new computer by using the Windows 2000 Server compact disk. The computer has five 18-GB hard disks Dick0, Disk1, Disk2, Disk3, and Disk4. The disks do not have any partitions defined.You want to use as much space on Disk0 as possible for the partition on which Windows 2000 Server is installed. You want the disk on which you install Windows 2000 Server to be fault tolerant. You also want as much disk space as possible across the other disks to be available for data storage and to be fault tolerant.What should you do? (Each correct answer presents part of the solution. Choose three)A. Install Windows 2000 Server on a 4-GB NTFS partition on Disk 0. Configure the five disks as dynamic disks.B. Install Windows 2000 Server on a 18-GB NTFS partition on Disk 0. Configure the five disks as dynamic disks.C. Create a RAID-5 volume using Disk2, Disk3, and Disk4.D. Create a stripped volume using Disk2, Disk3, and Disk4.E. Create a RAID-5 volume using all disks.F. Create a stripped volume using all disks.G. Select the volume on Disk0 and add a mirror using Disk1.

3.You are the administrator of Ezonexam.com's Windows 2000 network.Your computer is configured to use both Windows 2000 Professional and Windows NT Workstation 4.0 Service Pack 3. Your computer has three hard disks: Disk 0, Disk1, and Disk2. Windows NT Workstation 4.0 is installed on Disk 0. Windows 2000 Professional is installed on Disk1. You want to store your project files on Disk2. You configure Disk2 as a basic volume and format the volume as NTFS in Windows 2000 Professional. You then start Windows NT Workstation 4.0. You find that you cannot access your project files.You want to be able to access your project files when using either of the operating systems.What should you do?A．Upgrade Windows NT Workstation 4.0 to Service Pack 4 or later.B．Configure Disk 2 as a dynamic volume then format as an NTFS partition.C．Configure Disk 2 to use Encrypting File System (EFS).D．Configure Disk 2 as a basic volume and format the volume as FAT32.

4.Your network includes Windows 98 computers and Windows 2000 Server computers. You are adding a new computer to the network, and you plan to install Windows 2000 Server on the new computer. The computer has one 20-GB hard disk with no partitions defined.The Windows 2000 Server CD-ROM is unavailable. You want install Windows 2000 Server from source files that are located on a server on the network. You also want the entire hard disk of the new computer to be used for the system partition.What should you do?A．On another Windows 2000 computer, use Makebt32.exe to create installation startup disks. Start the new computer by using the first disk.B．On another Windows 2000 computer, format a floppy disk. Copy NTLDR, Boot.ini, Ntdetect.com, Ntbootdd.sys to this disk. Start the new computer by using the disk.C．Start the new computer by using a Windows 98 network boot disk. Connect to the network server. Run Dsclient.exe. Create and format a 20-GB FAT32 partition.D．Start the new computer by using a Windows 98 network boot disk. Create and format a single FAT32 partition. Connect to the network server. Run Winnt.exe.E．Start the computer by using a Windows 98 network boot disk. Create and format a single FAT32 partition. Start the new computer by using a Windows 2000 Emergency Repair Disk.

更多“单选题要在Windows 2000 Professional中对未分配空间进行分区，需使用（）A Partition ManagementB CONVERTC Disk AdministratorD Disk Management”相关问题

  • 第1题：

    You are configuring five computers for Windows NT Workstation 4.0 and Windows 2000 Professional.

    Each computer has an 8 GB hard disk.

    You configure the hard disk on each computer to have two 4 GB partitions. Windows NT Workstation is installed on drive C and Windows 2000 Professional on drive D.

    In Windows 2000 Professional, you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart your computer and load Windows NT Workstation. You notice that users can save files to drive D.

    You want to prevent users from saving the files to drive D in either operating system. You also want to ensure that users can access both drives while using either operating system.

    What should you do?

    A．Use Windows 2000 Professional to configure drive D as a dynamic partition.

    B．Use Windows 2000 Professional to enable encrypting file system on drive D.

    C．Use Windows NT workstation to configure NTFS permissions on drive D to deny the users write permission.

    D．Reinstall Windows NT Workstation after configuring disk quotas.


    正确答案：C
    解析：Explanation: You can use NTFS permissions to prevent users from saving files to a specific drive, partition or folder. NTFS permissions can be set on Windows NT computers that use the NTFS file system. Setting the NTFS permissions to deny users write permissions will prevent the users from saving work files on the disk.

    Incorrect answers:
    A: Windows NT users cannot use dynamic partitions, as dynamic partitions are a storage feature that has been introduced with Window 2000. Thus, configuring drive D as a dynamic partition will prevent the Windows NT Workstation users from using the disk. However, the Windows 2000 Professional users will still be able to make use of the drive and to store files on the drive.

    B: The Encrypting File System (EFS) is a file and folder security mechanism used to prevent unauthorized users from accessing encrypted files. This does not prevent users from saving files on the disk. It only prevents them from opening and reading encrypted files.

    D: Reinstalling Windows NT will not prevent users in Windows 2000 to save files on disk D. As the installation process does not have an option to prevent users from saving files to specified locations.

  • 第2题：

    用Ghost进行分区对拷（复制），需要选择的命令是（）

    • A、“LOCAL”→“DISK”→“TO PARTITION”
    • B、“LOCAL”→“PARTITION”→“FROM IMAGE”
    • C、“LOCAL”→“DISK”→“TO DISK”
    • D、“LOCAL”→“PARTITION”→“TO PARTITION”

    正确答案:D

  • 第3题：

    用户在Windows 2003 Server计算机上存放大文件遇到问题，想指定磁盘配额。指定磁盘配额时，你发现存放用户文件的卷是FAT32卷。要指定磁盘配额，就要有NTFS分区。用哪个命令或实用程序可以将分区变为NTFS而不丢失任何数据？（）

    • A、NTFSCONV
    • B、CONVERT
    • C、Disk Administrator
    • D、Disk Manager

    正确答案:B

  • 第4题：

    You are the network administrator for . In particular you administer a Windows 2003 server named TestKing13. You need to use Disk Management to configure a partition on TestKing13. When you attempt to access Disk Management, you receive the following error message: "Unable to connect Logical Disk Manager service." You verify that the Logical Disk Manager service is started. What is the most likely cause of the problem?（）

    • A、There is not enough available space on the boot partition.
    • B、The disk performance counters are disabled.
    • C、The Logical Disk Manager Administrative service is disabled.
    • D、The Windows 2003 Administration Tools Pack is not installed

    正确答案:C

  • 第5题：

    You have a computer that runs Windows XP Professional. The computer has multiple FAT32- formatted partitions. You install a new disk drive. You create a new FAT32-formatted partition in the new disk drive. You need to mount the new partition as a folder in drive C. What should you do?（） 

    • A、Convert the C partition to NTFS. From Disk Management, modify the drive path of the new partition.
    • B、Convert the new partition to NTFS. From Disk Management, modify the drive path of the C partition.
    • C、Upgrade all disks to dynamic disks. From Diskpart, set the new partition as Active. Add an entry to the boot.ini file. 
    • D、Upgrade all disks to dynamic disks. From Diskpart, clear all configuration information for the new disk. Add an entry to the boot.ini file. 

    正确答案:A

  • 第6题：

    You have a computer that runs Windows XP. The computer has one basic disk that contains a single partition. The partition has 30 GB of free space. The hard disk has 5 GB of unallocated space. You need toinstall Windows 7 in a dual-boot configuration. Windows 7 must not be installed in a virtual hard disk (VHD). What should you do first?（）

    • A、Create a second partition.
    • B、Shrink the primary partition.
    • C、Convert the hard disk to a GPT disk.
    • D、Convert the hard disk to a dynamic disk.

    正确答案:B

  • 第7题：

    You are the administrator of Company.com’s Windows 2000 network.   Your computer is configured to use both Windows 2000 Professional and Windows NT Workstation 4.0 Service Pack 3. Your computer has three hard disks: Disk 0, Disk1, and Disk2. Windows NT Workstation 4.0 is installed on Disk 0. Windows 2000 Professional is installed on Disk1. You want to store your project files on Disk2. You configure Disk2 as a basic volume and format the volume as NTFS in Windows 2000 Professional. You then start Windows NT Workstation 4.0. You find that you cannot access your project files.  You want to be able to access your project files when using either operating systems.   What should you do?（）

    • A、Upgrade Windows NT Workstation 4.0 to Service Pack 4 or later.
    • B、Configure Disk 2 as a dynamic volume then format as an NTFS partition.
    • C、Configure Disk 2 to use Encrypting File System （EFS）.
    • D、Configure Disk 2 as a basic volume and forma the volume as FAT32.

    正确答案:A

  • 第8题：

    单选题
    You are the administrator of Company.com’s Windows 2000 network.   Your computer is configured to use both Windows 2000 Professional and Windows NT Workstation 4.0 Service Pack 3. Your computer has three hard disks: Disk 0, Disk1, and Disk2. Windows NT Workstation 4.0 is installed on Disk 0. Windows 2000 Professional is installed on Disk1. You want to store your project files on Disk2. You configure Disk2 as a basic volume and format the volume as NTFS in Windows 2000 Professional. You then start Windows NT Workstation 4.0. You find that you cannot access your project files.  You want to be able to access your project files when using either operating systems.   What should you do?（）
    A

    Upgrade Windows NT Workstation 4.0 to Service Pack 4 or later.

    B

    Configure Disk 2 as a dynamic volume then format as an NTFS partition.

    C

    Configure Disk 2 to use Encrypting File System （EFS）.

    D

    Configure Disk 2 as a basic volume and forma the volume as FAT32.


    正确答案： D
    解析： 暂无解析

  • 第9题：

    单选题
    You are the administrator of Company's network. You have configured your computer with a dual-boot configuration. The computer uses both Windows 2000 Professional and Windows NT Workstation 4.0 with the latest service pack. Your computer is equipped with three hard disks: Disk 0, Disk1, and Disk2. Windows NT Workstation 4.0 is installed on Disk 0. Windows 2000 Professional is installed on Disk1. You wish to use Disk 2 to store your project files on. You partition Disk 2 and configure it as a dynamic volume in Windows 2000 Professional. You then start Windows NT Workstation 4.0. You find that you cannot access your project files. You want to be able to access your project files when using either of the operating systems.  What should you do?（）
    A

    Format the dynamic volume as a FAT32 partition.

    B

    Format the dynamic volume as a FAT16 partition.

    C

    Configure Disk 2 to use Encrypting File System （EFS）.

    D

    Configure Disk 2 as a basic volume and format the volume as NTFS.

    E

    Configure Disk 2 as a basic volume and format the volume as FAT32.


    正确答案： E
    解析： 暂无解析

  • 第10题：

    单选题
    You are the desktop administrator for Company.com’s sales department. Company.com’s network contains a RIS server.  You need to install Windows 2000 Professional on a computer that has a SCSI disk subsystem. You start the computer by using the Windows 2000 Professional CD-ROM, and you begin the installation. However, Setup reports that it cannot find any disk on which to install Windows 2000 Professional. You start the computer by using a RIS bootable floppy disk, and you receive the same result. What should you do?（）
    A

     Add an answer file to the root directory of the RIS bootable floppy disk.      Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS. 

    B

     Add the SCSI-controller driver to the root directory of the RIS bootable floppy disk.     Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS. 

    C

     Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup.     After Setup starts, provide an answer file on a floppy disk. 

    D

     Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup.     After Setup starts, provide a SCSI-controller driver on a floppy disk. 

    E

     Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup.     After Setup starts, provide the appropriate HAL on a floppy disk. 


    正确答案： C
    解析： 暂无解析

  • 第11题：

    单选题
    You are the network administrator for . In particular you administer a Windows 2003 server named TestKing13. You need to use Disk Management to configure a partition on TestKing13. When you attempt to access Disk Management, you receive the following error message: "Unable to connect Logical Disk Manager service." You verify that the Logical Disk Manager service is started. What is the most likely cause of the problem?（）
    A

    There is not enough available space on the boot partition.

    B

    The disk performance counters are disabled.

    C

    The Logical Disk Manager Administrative service is disabled.

    D

    The Windows 2003 Administration Tools Pack is not installed


    正确答案： B
    解析： 暂无解析

  • 第12题：

    单选题
    You have a computer that runs Windows XP Professional. The computer has multiple FAT32- formatted partitions. You install a new disk drive. You create a new FAT32-formatted partition in the new disk drive. You need to mount the new partition as a folder in drive C. What should you do?（）
    A

    Convert the C partition to NTFS. From Disk Management, modify the drive path of the new partition.

    B

    Convert the new partition to NTFS. From Disk Management, modify the drive path of the C partition.

    C

    Upgrade all disks to dynamic disks. From Diskpart, set the new partition as Active. Add an entry to the boot.ini file. 

    D

    Upgrade all disks to dynamic disks. From Diskpart, clear all configuration information for the new disk. Add an entry to the boot.ini file. 


    正确答案： C
    解析： 暂无解析

  • 第13题：

    下列BIOS报警信息中，表示硬盘没有格式化，需对硬盘分区进行格式化的是（）

    • A、Missing operation system
    • B、No Partition Bootable
    • C、Non-system disk or disk error
    • D、No ROM BASIC

    正确答案:C

  • 第14题：

    要在Windows 2000 Professional中对未分配空间进行分区，需使用（）

    • A、Partition Management
    • B、CONVERT
    • C、Disk Administrator
    • D、Disk Management

    正确答案:D

  • 第15题：

    You are the administrator of ExamSheet's network.  The software department is preparing to rewrite an accounting application so that it will run on  Windows 2000 Professional computers. All of the computers in the software department currently use Windows 98. You plan to configure the computers in the software department so that users can use both Windows 98 and Windows 2000 Professional during the project. You want to ensure that users in the software department can access all of the files on their computers while using operating system.  What should you do?（）

    • A、Create and format an NTFS volume. Install Windows 2000 Professional on the volume. Create a primary partition in the remaining disk space and format the volume using the FAT32 file system.Reinstall Windows 98 on the new primary partition. 
    • B、Create and format an NTFS volume. Install Windows 2000 Professional on the volume. Create an extended partition in the remaining disk space and format the volume using the FAT32 file system. Reinstall Windows 98 on the new extended partition. 
    • C、Create and format and extended partition. Create a logical drive within the extended partition and format the drive with the FAT32 file system. Install Windows 2000 Professional on the new partition. 
    • D、Create and format an extended partition. Create a logical drive within the extended partition and format the drive with the NTFS file system. Install Windows 2000 Professional on the new partition.

    正确答案:C

  • 第16题：

    You are the desktop administrator for Company.com’s sales department. Company.com’s network contains a RIS server.  You need to install Windows 2000 Professional on a computer that has a SCSI disk subsystem. You start the computer by using the Windows 2000 Professional CD-ROM, and you begin the installation. However, Setup reports that it cannot find any disk on which to install Windows 2000 Professional. You start the computer by using a RIS bootable floppy disk, and you receive the same result. What should you do?（）

    • A、 Add an answer file to the root directory of the RIS bootable floppy disk.      Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS. 
    • B、 Add the SCSI-controller driver to the root directory of the RIS bootable floppy disk.     Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS. 
    • C、 Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup.     After Setup starts, provide an answer file on a floppy disk. 
    • D、 Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup.     After Setup starts, provide a SCSI-controller driver on a floppy disk. 
    • E、 Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup.     After Setup starts, provide the appropriate HAL on a floppy disk. 

    正确答案:D

  • 第17题：

    You are the administrator of Company's network. You have configured your computer with a dual-boot configuration. The computer uses both Windows 2000 Professional and Windows NT Workstation 4.0 with the latest service pack. Your computer is equipped with three hard disks: Disk 0, Disk1, and Disk2. Windows NT Workstation 4.0 is installed on Disk 0. Windows 2000 Professional is installed on Disk1. You wish to use Disk 2 to store your project files on. You partition Disk 2 and configure it as a dynamic volume in Windows 2000 Professional. You then start Windows NT Workstation 4.0. You find that you cannot access your project files. You want to be able to access your project files when using either of the operating systems.  What should you do?（）

    • A、Format the dynamic volume as a FAT32 partition.
    • B、Format the dynamic volume as a FAT16 partition.
    • C、Configure Disk 2 to use Encrypting File System （EFS）.
    • D、Configure Disk 2 as a basic volume and format the volume as NTFS.
    • E、Configure Disk 2 as a basic volume and format the volume as FAT32.

    正确答案:D

  • 第18题：

    Your computers have both Windows NT Workstation 4.0， and Windows 2000 Professional operating systems. You configure the hard disk on each computer to have two 4-GB partitions. Windows NT Workstation is installed on drive C， and Windows 2000 Professional is installed on drive D. You configure a disk quota on drive D to prevent users from saving data on the disk.  How can you prevent users from saving files to drive D in either operating system？（）

    • A、The required result cannot be obtained with the above given solutions
    • B、Enable EFS on D
    • C、Format the NT 4 partition and reload NT 4
    • D、Use NT 4.0 NTFS permissions to deny users write access to D

    正确答案:D

  • 第19题：

    单选题
    You are the administrator of ExamSheet's network.  The software department is preparing to rewrite an accounting application so that it will run on  Windows 2000 Professional computers. All of the computers in the software department currently use Windows 98. You plan to configure the computers in the software department so that users can use both Windows 98 and Windows 2000 Professional during the project. You want to ensure that users in the software department can access all of the files on their computers while using operating system.  What should you do?（）
    A

    Create and format an NTFS volume. Install Windows 2000 Professional on the volume. Create a primary partition in the remaining disk space and format the volume using the FAT32 file system.Reinstall Windows 98 on the new primary partition. 

    B

    Create and format an NTFS volume. Install Windows 2000 Professional on the volume. Create an extended partition in the remaining disk space and format the volume using the FAT32 file system. Reinstall Windows 98 on the new extended partition. 

    C

    Create and format and extended partition. Create a logical drive within the extended partition and format the drive with the FAT32 file system. Install Windows 2000 Professional on the new partition. 

    D

    Create and format an extended partition. Create a logical drive within the extended partition and format the drive with the NTFS file system. Install Windows 2000 Professional on the new partition.


    正确答案： D
    解析： 暂无解析

  • 第20题：

    单选题
    You are configuring five computers for Windows NT Workstation 4.0 and Windows 2000 Professional. Each computer has an 8 GB hard disk. You configure the hard disk on each computer to have two 4 GB partitions.  Windows NT Workstation is installed on drive C and Windows 2000 Professional on drive D. In Windows 2000 Professional， you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart your computer and load Windows NT Workstation. You notice that users can save files to drive D.  You want to prevent users from saving the files to drive D in either operating system. You also want to ensure that users can access both drives while using either operating system.  What should you do？（）
    A

    Use Windows 2000 Professional to configure drive D as a dynamic partition

    B

    Use Windows 2000 Professional to enable encrypting file system on drive D

    C

    Use Windows NT workstation to configure NTFS permissions on drive D to deny the users  write permission

    D

    Reinstall Windows NT Workstation after configuring disk quotas


    正确答案： C
    解析： ou can use NTFS permissions to prevent users from saving files to a specific drive， partition or folder. NTFS permissions can be set on Windows NT computers that use the NTFS file system. Setting the NTFS permissions to deny users write permissions will prevent the users from saving work files on the disk.

  • 第21题：

    单选题
    You are the administrator of a Windows 2000 network. You are configuring eight computers to use both Windows NT Workstation 4.0 and Windows 2000 Professional. Each computer has a 10 GB hard disk. You configure the hard disk on each computer to have two 5 GB partitions. Windows NT Workstation is installed on drive D. Windows 2000 Professional is installed on drive C. In Windows 2000 Professional, you configure a disk quota on drive C to prevent users from saving work files on the disk. You restart the computers and load Windows NT Workstation 4.0. You notice that users can still save files to drive C. You want to prevent users from saving files to drive C in either operating system. You also want to ensure that users can access both drives while using either operating system. What should you do on each computer? （）
    A

    Reinstall Windows NT Workstation 4.0 after configuring the disk quotas

    B

    Use Windows 2000 Professional to configure drive C as a dynamic partition

    C

    Use Windows 2000 Professional to enable Encrypting File System （EFS） on drive C

    D

    Use Windows NT Workstation 4.0 to configure NTFS permissions on drive C to deny the usersWrite permission


    正确答案： D
    解析： 暂无解析

  • 第22题：

    单选题
    要在Windows 2000 Professional中对未分配空间进行分区，需使用（）
    A

    Partition Management

    B

    CONVERT

    C

    Disk Administrator

    D

    Disk Management


    正确答案： A
    解析： 暂无解析

  • 第23题：

    单选题
    You have a computer that runs Windows XP. The computer has one basic disk that contains a single partition. The partition has 30 GB of free space. The hard disk has 5 GB of unallocated space. You need toinstall Windows 7 in a dual-boot configuration. Windows 7 must not be installed in a virtual hard disk (VHD). What should you do first?（）
    A

    Create a second partition.

    B

    Shrink the primary partition.

    C

    Convert the hard disk to a GPT disk.

    D

    Convert the hard disk to a dynamic disk.


    正确答案： B
    解析： 暂无解析

  • 第24题：

    单选题
    You are the administrator of your company’s network. The software department is preparing to rewrite an accounting application so that it will run on Windows 2000 Professional computers. All of the computers in the software department currently use Windows 98.  You want to configure the computers in the software department so that the users can use both Windows 98 and Windows 2000 Professional during the project. You also want to ensure that the computers are configured for optimal disk performance. In addition you want to ensure that users in the software department can access all of the files on their computers by using either operating system.  What should you do? （）
    A

     Create and format a FAT 32 partition.

    B

     Create and format an NTFS volume.

    C

     Configure Windows 2000 Professional to enable disk compression.

    D

     Configure Windows 2000 Professional to enable dynamic volume


    正确答案： D
    解析： All files need to be accessed from both Windows 98 and Windows 2000. Windows 98 only supports the FAT and the FAT32 file systems. It cannot support the NTFS file system. Therefore the partition must be formatted with the FAT32 file system.

相关内容