单选题Why is there no need to configure complex overlay network topologies when using Cisco WAAS? （）A remote scheduling of software distributionB comprehensive logs, reports, and graphsC automatic discovery of Cisco WAEsD content pre-positioning

题目
单选题
Why is there no need to configure complex overlay network topologies when using Cisco WAAS? （）
A

remote scheduling of software distribution

B

comprehensive logs, reports, and graphs

C

automatic discovery of Cisco WAEs

D

content pre-positioning

相似考题

1.After making some network changes you power off and then power on your Cisco router named VE1. What sequence of events occurs when VE1 is powered up?A. Perform. POST, locate configuration statements, apply configuration statements, locate Cisco IOS software, and load Cisco IOS software.B. Locate Cisco IOS software, load Cisco IOS software, locate configuration statements, apply configuration statements, and perform. POST.C. Test software routines, POST, load configuration files, load Cisco IOS software, test Cisco IOS software.D. Perrform. POST, locate Cisco IOS software, load the Cisco IOS software, locate configuration statements, and apply configuration statements.E. Load and test IOS, load configuration files, test software routines, POST.F. None of the above

2.Cisco IOS is the software used on the vast majority of Cisco Systems routers and current Cisco network switches. As a network administrator, you are required to configure MPLS on Cisco IOS. In such a situation,which three of the following steps are necessary to take?（）A. Start LDP.B. Enable CEF switching.C. Configure conditional label advertising.D. Enable label switching on frame mode interfaces.E. disable IP TTL propagationF. configure conditional label advertising

3.When you enter the interface command auto qos voip cisco－phone on a port at the edge of a network,how does the Cisco Catalyst switch detect if a Cisco IP Phone is connected to the port?()A. by snooping the CoS marking on the incoming framesB. by using RTP hello messages between the switch port and the Cisco IP PhoneC. by using CDPD. by using DHCP snoopingE. by snooping the incoming 802.1Q VLAN tag

4.As an experienced network administrator, you are aware of the knowledge that it is unnecessary to configure complex overlay network topologies while applying Cisco Wide Area Application Services (WAAS) technology.What is most probably the reason for that?（）A. Content pre-positioningB. Automatic discovery of Cisco WAEsC. Comprehensive logs, reports, and graphsD. Remote scheduling of software distribution

更多“单选题Why is there no need to configure complex overlay network topologies when using Cisco WAAS? （）A remote scheduling of software distributionB comprehensive logs, reports, and graphsC automatic discovery of Cisco WAEsD content pre-positioning”相关问题

  • 第1题：

    Why is there no need to configure complex overlay network topologies when using Cisco WAAS? ()

    A. remote scheduling of software distribution

    B. comprehensive logs, reports, and graphs

    C. automatic discovery of Cisco WAEs

    D. content pre-positioning


    参考答案：C

  • 第2题：

    A network administrator needs to configure a serial link between the main office and a remote location. The router at the remote office is a non-Cisco router.How should the network administrator configure the serial interface of the main office router to make the connection?（）

    A.

    B.

    C.

    D.


    参考答案：B

  • 第3题：

    As an experienced network administrator, you are aware of the knowledge that it is unnecessary to configure complex overlay network topologies while applying Cisco Wide Area Application Services (WAAS) technology. What is most probably the reason for that?（）

    • A、Content pre-positioning
    • B、Automatic discovery of Cisco WAEs
    • C、Comprehensive logs, reports, and graphs
    • D、Remote scheduling of software distribution

    正确答案:B

  • 第4题：

    When you enter the interface command auto qos voip cisco-phone on a port at the edge of a network,how does the Cisco Catalyst switch detect if a Cisco IP Phone is connected to the port?（）

    • A、by snooping the CoS marking on the incoming frames
    • B、by using RTP hello messages between the switch port and the Cisco IP Phone
    • C、by using CDP
    • D、by using DHCP snooping
    • E、by snooping the incoming 802.1Q VLAN tag

    正确答案:C

  • 第5题：

    When using the Cisco SDM Quick Setup Siteto-Site VPN wizard， which three parameters do you configure？（）

    • A、Source interface where encrypted traffic originates
    • B、IP address for the remote peer
    • C、Transform set for the IPsec tunnel
    • D、Interface for the VPN connection

    正确答案:A,B,D

  • 第6题：

    You need to configure a new Cisco router to be installed in the VOIP network. Which threeinterface commands will configure the switch port to support a connected Cisco phone and to trustthe CoS values received on the port if CDP discovers that a Cisco phone is attached？（）

    • A、switchport voice vlan vlan-id
    • B、mls qos trust device cisco-phone
    • C、switchport priority extend cos_value
    • D、mls qos trust cos
    • E、mls qos trust override cos

    正确答案:A,B,D

  • 第7题：

    Why is there no need to configure complex overlay network topologies when using Cisco WAAS? （）

    • A、remote scheduling of software distribution
    • B、comprehensive logs, reports, and graphs
    • C、automatic discovery of Cisco WAEs
    • D、content pre-positioning

    正确答案:C

  • 第8题：

    Simplified guest access, comprehensive communication and collaboration, and optimized asset and network visibility are benefits of which type of Cisco deployment?（）

    • A、CiscoCloud Computing
    • B、Cisco Routingand Switching
    • C、Cisco Wireless
    • D、Cisco Conferencing

    正确答案:C

  • 第9题：

    单选题
    Why is there no need to configure complex overlay network topologies when using Cisco WAAS? （）
    A

    remote scheduling of software distribution

    B

    comprehensive logs, reports, and graphs

    C

    automatic discovery of Cisco WAEs

    D

    content pre-positioning


    正确答案： D
    解析： 暂无解析

  • 第10题：

    单选题
    As an experienced network administrator, you are aware of the knowledge that it is unnecessary to configure complex overlay network topologies while applying Cisco Wide Area Application Services (WAAS) technology. What is most probably the reason for that?（）
    A

    Content pre-positioning

    B

    Automatic discovery of Cisco WAEs

    C

    Comprehensive logs, reports, and graphs

    D

    Remote scheduling of software distribution


    正确答案： C
    解析： 暂无解析

  • 第11题：

    单选题
    What is the benefit of using the Cisco Easy VPN Server feature along with the Cisco software VPN client for implementing remote-access VPNs？ （）
    A

     The Cisco Easy VPN Server feature and the Cisco software VPN client use the same GUI configuration tool to simplify remote-access VPN configurations.

    B

     The Cisco Easy VPN Server feature allows the Cisco software VPN client to receive its security policies from the central site VPN device. This minimizes the configuration requirements at the remote location for large remote access VPN deployments.

    C

     The Cisco Easy VPN Server feature and the Cisco software VPN client use hardware-based encryption to reduce the CPU overhead of the central site VPN router.

    D

     The Cisco Easy VPN Server feature and the Cisco software VPN client enable scalable remote-access VPNs deployment by using a thick client/thin server model where the central site VPN router can handle thousands of incoming VPN connections.


    正确答案： B
    解析： 暂无解析

  • 第12题：

    多选题
    When using Cisco Network Assistant to configure a WS-CE500-24LC switch， which three are available choices in the port settings window？（）
    A

    Duplex mode selections

    B

    Auto MDIX selections

    C

    Status Selections

    D

    Group mode selections

    E

    Port security selections


    正确答案： D,E
    解析： 暂无解析

  • 第13题：

    After making some network changes you power off and then power on your Cisco router. What sequence of events occurs when a router is powered up?()

    A. Perform POST, locate configuration statements, apply configuration statements, locate Cisco IOS software, and load Cisco IOS software.

    B. Locate Cisco IOS software, load Cisco IOS software, locate configuration statements, apply configuration statements, and perform POST.

    C. Test software routines, POST, load configuration files, load Cisco IOS software, test Cisco IOS software.

    D.POST, locate Cisco IOS software, load the Cisco IOS software, locate configuration statements, and apply configuration statements.

    E. Load and test IOS, load configuration files, test software routines, POST.


    参考答案：D

  • 第14题：

    What is the benefit of using the Cisco Easy VPN Server feature along with the Cisco software VPN client for implementing remote-access VPNs？ （）

    • A、 The Cisco Easy VPN Server feature and the Cisco software VPN client use the same GUI configuration tool to simplify remote-access VPN configurations.
    • B、 The Cisco Easy VPN Server feature allows the Cisco software VPN client to receive its security policies from the central site VPN device. This minimizes the configuration requirements at the remote location for large remote access VPN deployments.
    • C、 The Cisco Easy VPN Server feature and the Cisco software VPN client use hardware-based encryption to reduce the CPU overhead of the central site VPN router.
    • D、 The Cisco Easy VPN Server feature and the Cisco software VPN client enable scalable remote-access VPNs deployment by using a thick client/thin server model where the central site VPN router can handle thousands of incoming VPN connections.

    正确答案:B

  • 第15题：

    If you have Cisco integrated services router and need to upgrade the Cisco IOS image,which kind of Cisco Support services do you need?（）

    • A、Cisco SMARTNet onsite
    • B、Cisco TAC
    • C、Advanced Hardware Replacement
    • D、Software Support

    正确答案:D

  • 第16题：

    When using Cisco Network Assistant to configure smartports， Which tow of the following roles can belong to a VLAN of the type "access" ？（）

    • A、Phone+Desktop
    • B、Desktop
    • C、Switch
    • D、Router
    • E、Trunk

    正确答案:A,B

  • 第17题：

    When using Cisco Network Assistant to configure a WS-CE500-24LC switch， which three are available choices in the port settings window？（）

    • A、Duplex mode selections
    • B、Auto MDIX selections
    • C、Status Selections
    • D、Group mode selections
    • E、Port security selections

    正确答案:A,B,C

  • 第18题：

    Acme Company has offices around the country. With the use of Cisco Unified CallManager， the company has deployed a VoIP network in a multisite centralized configuration. Which IOS gateway feature should be deployed to enable VoIP devices to register with a local gateway and continue to function when the connection to the Cisco Unified CallManager is broken？ （）

    • A、gatekeeper multizone
    • B、Call Admission Control （CAC）
    • C、Automatic Alternate Routing （AAR）
    • D、Survivable Remote Site Telephony （SRST）

    正确答案:D

  • 第19题：

    You need to configure a new Cisco router to be installed in the Company VOIP network.  Which  three interface commands will configure the switch port to support a connected Cisco phone and  to trust the CoS values received on the port if CDP discovers that a Cisco phone is attached？ （）

    • A、switchport voice vlan vlan-id
    • B、mls qos trust device cisco-phone
    • C、switchport priority extend cos_value
    • D、mls qos trust cos
    • E、mls qos trust override cos

    正确答案:A,B,D

  • 第20题：

    You need to design the configuration on one Windows Server 2003 terminal server that hosts the SalesForceMax application to meet security requirements. Which three actions should you take？（）

    • A、Configure the terminal server so that users log on by using local user accounts
    • B、Configure the terminal server so that users log on by using domain accounts
    • C、Configure the server to run SalesForceMax in a dedicated window when a user logs on to the terminal server
    • D、Configure the server to allow each user to have a Windows desktop when the user logs on to the terminal server
    • E、Use software restriction polices in Group Policy objects （GPOs） that apply to the terminal server
    • F、Use Appsec.exe to restrict applications on the terminal server

    正确答案:B,C,E

  • 第21题：

    多选题
    When using Cisco Network Assistant to configure smartports， Which tow of the following roles can belong to a VLAN of the type "access" ？（）
    A

    Phone+Desktop

    B

    Desktop

    C

    Switch

    D

    Router

    E

    Trunk


    正确答案： E,A
    解析： 暂无解析

  • 第22题：

    单选题
    After making some network changes you power off and then power on your Cisco router. What sequence of events occurs when a router is powered up?（）
    A

    Perform POST, locate configuration statements, apply configuration statements, locate Cisco IOS software, and load Cisco IOS software.

    B

    Locate Cisco IOS software, load Cisco IOS software, locate configuration statements, apply configuration statements, and perform POST.

    C

    Test software routines, POST, load configuration files, load Cisco IOS software, test Cisco IOS software.

    D

    POST, locate Cisco IOS software, load the Cisco IOS software, locate configuration statements, and apply configuration statements.

    E

    Load and test IOS, load configuration files, test software routines, POST.


    正确答案： A
    解析： 暂无解析

  • 第23题：

    单选题
    When you enter the interface command auto qos voip cisco-phone on a port at the edge of a network, how does the Cisco Catalyst switch detect if a Cisco IP Phone is connected to the port? （）
    A

    by snooping the CoS marking on the incoming frames

    B

    by using RTP hello messages between the switch port and the Cisco IP Phone

    C

    by using CDP

    D

    by using DHCP snooping

    E

    by snooping the incoming 802.1Q VLAN tag


    正确答案： D
    解析： 暂无解析

  • 第24题：

    多选题
    Cisco IOS is the software used on the vast majority of Cisco Systems routers and current Cisco network switches. As a network administrator, you are required to configure MPLS on Cisco IOS. In such a situation, which three of the following steps are necessary to take?（）
    A

    Start LDP.

    B

    Enable CEF switching.

    C

    Configure conditional label advertising.

    D

    Enable label switching on frame mode interfaces.

    E

    disable IP TTL propagation

    F

    configure conditional label advertising


    正确答案： E,F
    解析： 暂无解析

相关内容