多选题During a redistribution of routes from OSPF into EIGRP, an ad ministrator notices that none of the OSPF routes are showing in EIGRP. What are two possible causes?（）Aincorrect distribute lists have been configuredBmissing ip classless commandCCEF not en

题目
多选题
During a redistribution of routes from OSPF into EIGRP, an ad ministrator notices that none of the OSPF routes are showing in EIGRP. What are two possible causes?（）
A

incorrect distribute lists have been configured

B

missing ip classless command

C

CEF not enabled

D

no default metric configured for EIGRP

相似考题

1.Router R1 is redistributing between two OSPF processes. Given the configuration shown, which includes all commands in the route map named fred, which of the following answers is true regarding the redistribution into OSPF process 1?（）router ospf 1redistribute ospf 2 external 2 route - map fred!route - map fred permit 10match ip address 1set metric - type type - 1A. No routes are redistributed because a route cannot be both E1 and E2.B. Only OSPF E2 routes in the OSPF 2 domain will be considered for redistribution.C. Inside the OSPF 2 domain, any formerly E2 routes will become E1 routes.D. Routes permitted by ACL 1 will be redistributed, regardless of whether the routes are E1 or E2 routes.

2.During a redistribution of routes from OSPF into EIGRP, an ad ministrator notices that none of the OSPF routes are showing in EIGRP. What are two possible causes?()A. incorrect distribute lists have been configuredB. missing ip classless commandC. CEF not enabledD. no default metric configured for EIGRP

3.Refer to the exhibit. EIGRP has been configured on router D. Router C is performing mutual redistribution between EI GRP and OSPF. While verifying that the redistribution is functioning properly, you discover that while router C has all of the EIGRP routes in its routing table, router A does not have any routes from the EIGRP domain. What on router C may be the cause o f the problem?（）A. The no auto - summary command needs to be added under router eigrp 1B. The subnets keyword was not included in the redistribute command under router ospf 1C. The metric specified for the redistributed EIGRP routes is too large; m aking the EIGRP routes unreachable by router AD. The default - information originate command needs to be added under router ospf 1E. The administrative distance of either OSPF or EIGRP must be changed so that EIGRP has a higher administrative distanc e than OSPF

4.For a router to successfully redistribute routes between OSPF and EIGRP, which of the following are true?()A. The router must have one routing protocol configured, but configuration for both routing protocols is not necessaryB. The router must hav e at least one working link connected to each routing domainC. The redistribute command must be configured under EIGRP to send the routes to OSPFD. The redistribute command should be configured under OSPF to take routes from EIGRP into OSPF

更多“多选题During a redistribution of routes from OSPF into EIGRP, an ad ministrator notices that none of the OSPF routes are showing in EIGRP. What are two possible causes?（）Aincorrect distribute lists have been configuredBmissing ip classless commandCCEF not en”相关问题

  • 第1题：

    Which two statements about route redistribution when implementing OSPF are true?()

    A. Routes learned using any IP routing protocol can only be redistributed into non IP routing protocols.

    B. OSPF can import routes learned using EIGRP, RIP, and IS - IS.

    C. OSPF routes cannot be exported into EIGRP, RIP, an d IS - IS.

    D. At the interdomain level, OSPF cannot import routes learned using BGP.

    E. OSPF routes can be exported into BGP.


    参考答案：B, E

  • 第2题：

    You have implemented mutua l route redistribution between OSPF and EIGRP on a border router. When checking the routing table on one of the EIGRP routers within the EIGRP routing domain, you are seeing some, but not all of the expected routes.What should you verify to troubleshoot this problem?（）

    A. The border router is using a proper seed metric for OSPF

    B. The border router is using a proper seed metric for EIGRP

    C. The administrative distance is set for OSPF and EIGRP

    D. The missing OSPF routes are present in the routing table of the border router

    E. The subnet keyword on the border router in the redistribute OSPF command


    参考答案：D

  • 第3题：

    Route redistribution (RR) has become an integral part of IP network design as the res ult of a growing need for disseminating certain routes across routing protocol boundaries. By default, which description is true when redistributing routes from other routing protocols into OSPF?（）

    A. Summarized routes are unacceptable

    B. They will appe ar in the OSPF routing table as type E2 routes

    C. Only routes with lower administrative distances will be imported

    D. All imported routes are to be automatically summarized if possible


    参考答案：B

  • 第4题：

    Refer to the exhibit. Which three statements accurately describe the result of applying the exhibited route map?()

    A. The map prohibits th e redistribution of all type 2 external OSPF routes.

    B. All routes that do no match clauses 10 and 20 of the route map are redistributed with their tags set to 8.

    C. The map prohibits the redistribution of all external OSPF routes with tag 6 set.

    D. Th e map permits the redistribution of all type 1 external OSPF routes.

    E. The map redistributes into EIGRP all routes that match the pfx prefix list and the five metric values?0000, 1000, 255, 1, and 1500.

    F. The map prohibits the redistribution of all ty pe 2 external OSPF routes with tag 6 set.


    参考答案：B, D, F

  • 第5题：

    During a redistribution of routes from OSPF into EIGRP, an ad ministrator notices that none of the OSPF routes are showing in EIGRP. What are two possible causes?（）

    • A、incorrect distribute lists have been configured
    • B、missing ip classless command
    • C、CEF not enabled
    • D、no default metric configured for EIGRP

    正确答案:A,D

  • 第6题：

    During a redistribution of routes from OSPF into EIGRP， the administrator notices that none of theOSPF routes are showing up in EIGRP. What are two possible causes？（）

    • A、Incorrect distribute lists have been configured
    • B、Missing ip classless command
    • C、CEF not enabled
    • D、No default metric configured for EIGRP

    正确答案:A,D

  • 第7题：

    You have implemented mutua l route redistribution between OSPF and EIGRP on a border router. When checking the routing table on one of the EIGRP routers within the EIGRP routing domain, you are seeing some, but not all of the expected routes. What should you verify to troubleshoot this problem?（）

    • A、The border router is using a proper seed metric for OSPF
    • B、The border router is using a proper seed metric for EIGRP
    • C、The administrative distance is set for OSPF and EIGRP
    • D、The missing OSPF routes are present in the routing  table of the border router
    • E、The subnet keyword on the border router in the redistribute OSPF command

    正确答案:D

  • 第8题：

    A router has learned three possible routes that could be used to reach a destination network. One route is from EIGRP and has a composite metric of 20514560. Another route is from OSPF with a metric of 782. The last is from RIPv2 and has a metric of 4. Which route or routes will the router install in the routing table?（）

    • A、the OSPF route
    • B、the EIGRP route
    • C、the RIPv2 route
    • D、all three routes
    • E、the OSPF and RIPv2 routes

    正确答案:B

  • 第9题：

    多选题
    Which two statements about route redistribution when implementing OSPF are true?（）
    A

    Routes learned using any IP routing protocol can only be redistributed into non IP routing protocols.

    B

    OSPF can import routes learned using EIGRP, RIP, and IS - IS.

    C

    OSPF routes cannot be exported into EIGRP, RIP, an d IS - IS.

    D

    At the interdomain level, OSPF cannot import routes learned using BGP.

    E

    OSPF routes can be exported into BGP.


    正确答案： B,E
    解析： 暂无解析

  • 第10题：

    单选题
    You have implemented mutua l route redistribution between OSPF and EIGRP on a border router. When checking the routing table on one of the EIGRP routers within the EIGRP routing domain, you are seeing some, but not all of the expected routes. What should you verify to troubleshoot this problem?（）
    A

    The border router is using a proper seed metric for OSPF

    B

    The border router is using a proper seed metric for EIGRP

    C

    The administrative distance is set for OSPF and EIGRP

    D

    The missing OSPF routes are present in the routing  table of the border router

    E

    The subnet keyword on the border router in the redistribute OSPF command


    正确答案： E
    解析： 暂无解析

  • 第11题：

    多选题
    During a redistribution of routes from OSPF into EIGRP， the administrator notices that none of theOSPF routes are showing up in EIGRP. What are two possible causes？（）
    A

    Incorrect distribute lists have been configured

    B

    Missing ip classless command

    C

    CEF not enabled

    D

    No default metric configured for EIGRP


    正确答案： C,D
    解析： 暂无解析

  • 第12题：

    单选题
    Your MPLS implementation is currently using internal backdoor links. What can you do to minimize the impact of having these links?（）
    A

    use BGP as the CE-PE routing protocol

    B

    use OSPF as the CE-PE routing protocol

    C

    use EIGRP as the CE-PE routing protocol

    D

    use the SP to redistribute routes as external routes for OSPF and EIGRP

    E

    use route redistribution at each location to ensure external routes are imported into the IGP


    正确答案： B
    解析： 暂无解析

  • 第13题：

    You have implemented mutual route redistribution between OSPF and EIGRP on a border router. When checking the routing table on one o f the OSPF routers within the OSPF routing domain, you are seeing some, but not all of the expected routes.Which two things should you verify to troubleshoot this problem?（）

    A. The border router is using a proper seed metric for OSPF

    B. The border ro uter is using a proper seed metric for EIGRP

    C. The administrative distance is set for OSPF and EIGRP

    D. The missing EIGRP routes are present in the routing table of the border router

    E. The subnet keyword on the border router in the redistribute EIG RP command


    参考答案：D, E

  • 第14题：

    Refer to the above exhibit. Why are the EIGRP neighbors for this router not learning the routes redistributed from OSPF?()

    A. Redistribution must be enabled mutually (in both directions) to work correctly.

    B. auto - summary causes the OSPF routes redistributed into EIGRP to be summarized; thus the OSPF network 116.16.34 is summarized to 116.3 4.0.0, which is already covered by the EIGRP protocol.

    C. Default metrics are not configured under EIGRP.

    D. Both routing protocols must have unique autonomous system numbers for redistribution to function correctly.


    参考答案：C

  • 第15题：

    Refer to the exhibit. Routers R1 and R2 have been configured to operate with OSPF. Routers R1 and R3 have been configured to operate with RIP. After configuring the redistribution between OSPF a nd RIP on R1, no OSPF routes are distributed into RIP. What should be done to correct this problem? （）

    A. The redistribution command should be reentered with the match route - type parameter included.

    B. The redistribution command should be reentered wit h the route - map map - tag parameter included.

    C. The redistribution command should be reentered with the metric metric - value parameter included.

    D. Routes will first need to be distributed into another protocol, and then into RIP.


    参考答案：C

  • 第16题：

    A router has learned three possible routes that could be used to reach a destination network. One route is from EIGRP and has a composite metric of 20514560. Another route is from OSPF with a metric of 782. The last is from RIPv2 and has a metric of 4. Which route or routes will the router install in the routing table?（）

    A. the OSPF route

    B. the EIGRP route

    C. the RIPv2 route

    D. all three routes

    E. the OSPF and RIPv2 routes


    参考答案：B

  • 第17题：

    Half of your network uses RIPv2 and the other half runs OSPF. The networks do not communicate with each other. Which two of these factors describe the impact of activating EIGRP over each separate part？ （）

    • A、EIGRP will not be accepted when configured on the actual RIPv2 routers.
    • B、OSPF will no longer be used in the routing table， because you only have EIGRP internal routes running.
    • C、OSPF will no longer be used in the routing table， because you only have EIGRP external routes running.
    • D、RIPv2 will populate its RIP database but not its routing table， because you only have EIGRP external routes running.
    • E、RIPv2 will populate its RIP database but not its routing table， because you only have EIGRP internal routes running.
    • F、OSPF database will have RIPv2 routes.

    正确答案:B,E

  • 第18题：

    You have implemented mutual route redistribution between OSPF and EIGRP on a border router. When checking the routing table on one o f the OSPF routers within the OSPF routing domain, you are seeing some, but not all of the expected routes. Which two things should you verify to troubleshoot this problem?（）

    • A、The border router is using a proper seed metric for OSPF
    • B、The border ro uter is using a proper seed metric for EIGRP
    • C、The administrative distance is set for OSPF and EIGRP
    • D、The missing EIGRP routes are present in the routing table of the border router
    • E、The subnet keyword on the border router in the redistribute EIG RP command

    正确答案:D,E

  • 第19题：

    Route redistribution (RR) has become an integral part of IP network design as the res ult of a growing need for disseminating certain routes across routing protocol boundaries. By default, which description is true when redistributing routes from other routing protocols into OSPF?（）

    • A、Summarized routes are unacceptable
    • B、They will appe ar in the OSPF routing table as type E2 routes
    • C、Only routes with lower administrative distances will be imported
    • D、All imported routes are to be automatically summarized if possible

    正确答案:B

  • 第20题：

    For a router to successfully redistribute routes between OSPF and EIGRP, which of the following are true?（）

    • A、The router must have one routing protocol configured, but configuration for both routing protocols is not necessary
    • B、The router must hav e at least one working link connected to each routing domain
    • C、The redistribute command must be configured under EIGRP to send the routes to OSPF
    • D、The redistribute command should be configured under OSPF to take routes from EIGRP into OSPF

    正确答案:B,D

  • 第21题：

    多选题
    For a router to successfully redistribute routes between OSPF and EIGRP, which of the following are true?（）
    A

    The router must have one routing protocol configured, but configuration for both routing protocols is not necessary

    B

    The router must hav e at least one working link connected to each routing domain

    C

    The redistribute command must be configured under EIGRP to send the routes to OSPF

    D

    The redistribute command should be configured under OSPF to take routes from EIGRP into OSPF


    正确答案： C,D
    解析： 暂无解析

  • 第22题：

    多选题
    Refer to the exhibit. Which three statements accurately describe the result of applying the exhibited route map？（）
    A

    The map prohibits the redistribution of all type 2 external OSPF routes with tag 6 set

    B

    The map prohibits the redistribution of all type 2 external OSPF routes

    C

    The map redistributes into EIGRP all routes that match the pfx prefix list and the five metric values40000， 1000， 255， 1， and 1500

    D

    The map prohibits the redistribution of all external OSPF routes with tag 6 set

    E

    All routes that do no match clauses 10 and 20 of the route map are redistributed with their tags set to 8

    F

    The map permits the redistribution of all type 1 external OSPF routes


    正确答案： C,A
    解析： 暂无解析

  • 第23题：

    多选题
    You have implemented mutual route redistribution between OSPF and EIGRP on a border router. When checking the routing table on one o f the OSPF routers within the OSPF routing domain, you are seeing some, but not all of the expected routes. Which two things should you verify to troubleshoot this problem?（）
    A

    The border router is using a proper seed metric for OSPF

    B

    The border ro uter is using a proper seed metric for EIGRP

    C

    The administrative distance is set for OSPF and EIGRP

    D

    The missing EIGRP routes are present in the routing table of the border router

    E

    The subnet keyword on the border router in the redistribute EIG RP command


    正确答案： B,A
    解析： 暂无解析

相关内容