单选题An administrator is having a hard time adding a new switch to the network. After verifying that allthe ports are configured correctly on each switch, which of the following should the administratorverily NEXT?（）A Straight-through cable is used to conne

题目
单选题
An administrator is having a hard time adding a new switch to the network. After verifying that allthe ports are configured correctly on each switch, which of the following should the administratorverily NEXT?（）
A

Straight-through cable is used to connect both switches

B

Loopback plug is connected

C

Crossover cable is used to connect both switches

D

Cable is a rollover cable

相似考题

1.The network administrator has just finished installing a new 10/100/1000 switch, but receives reports from the server administrator that servers connected to the new switch seem to be experiencing slow LAN connections. The network administrator checks the port connecting the new switch to the core switch and sees the following information:Which of the following is the MOST likely cause of the slow connections?（）A. The servers have not had VLAN tagging enabled on their NICs.B. Speed and duplex have not been set.C. VLAN tagging was not set on the trunk.D. The servers have been connected with CAT5 cable.

2.An administrator is having a hard time adding a new switch to the network. After verifying that allthe ports are configured correctly on each switch, which of the following should the administratorverily NEXT?（）A. Straight-through cable is used to connect both switchesB. Loopback plug is connectedC. Crossover cable is used to connect both switchesD. Cable is a rollover cable

3.A workgroup switch is configured with all ports assigned to VLAN 2. In addition,all ports are configured as full-duplex FastEthernet. What is the effect of adding switch ports to a new VLAN on this switch?（）A. The additions will create more collision domains.B. IP address utilization will be more efficient.C. More bandwidth will be required than was needed previously.D. An additional broadcast domain will be created.E. The possibility that switching loops will occur will increase dramatically.

4.A network technician is installing a new managed 10/100 Mbps switch on the network. The network has an older printer with a 10Mbps network adapter that will be moved to the new switch.Which of the following settings on the switch will need to be configured to support the printer?（）A. MAC filteringB. IP addressC. PoED. Port speed

更多“单选题An administrator is having a hard time adding a new switch to the network. After verifying that allthe ports are configured correctly on each switch, which of the following should the administratorverily NEXT?（）A Straight-through cable is used to conne”相关问题

  • 第1题：

    For which type of connection should a straight－through cable be used?()

    A.switch to switch

    B.switch to hub

    C.switch to router

    D.hub to hub

    E.router to PC


    参考答案：C

  • 第2题：

    For which type of connection should a straight-through cable be used?（）

    • A、switch to switch
    • B、switch to hub
    • C、switch to router
    • D、hub to hub
    • E、router to PC

    正确答案:C

  • 第3题：

    Routing convergence time is which of the following？（）

    • A、Time required for a VPN connection to occur
    • B、Time required by protocols to update their forwarding tables after changes have occurred
    • C、Time required for an IDS to detect suspicious software
    • D、Time required by switch ports to update their link status and transition to the forwarding state

    正确答案:B

  • 第4题：

    A network technician is installing a new managed 10/100 Mbps switch on the network. The network has an older printer with a 10Mbps network adapter that will be moved to the new switch. Which of the following settings on the switch will need to be configured to support the printer?（）

    • A、MAC filtering
    • B、IP address
    • C、PoE
    • D、Port speed

    正确答案:D

  • 第5题：

    Which type of cable should be used to make a connection between the Fa0/0 port on a router and the Fa0/0 port switch?（）

    • A、Rollover cable
    • B、Console cab le
    • C、Crossover cable
    • D、Straight-through cable
    • E、Serial cable

    正确答案:C

  • 第6题：

    An administrator replaces the network card in a web server. After replacing the network card some users can access the server but others cannot.  Which of the following is the FIRST thing the administrator should check？（）

    • A、 Default gateway
    • B、 The ports on the switch
    • C、 Port security on the servers switch port
    • D、 Ethernet cable

    正确答案:A

  • 第7题：

    An administrator replaces the network card in a web server. After replacing the network card some users can access the server but others cannot. Which of the following is the FIRST thing the administrator should check?（）

    • A、Default gateway
    • B、The ports on the switch
    • C、Port security on the server's switch port
    • D、Ethernet cable

    正确答案:A

  • 第8题：

    单选题
    An administrator replaces the network card in a web server. After replacing the network card some users can access the server but others cannot. Which of the following is the FIRST thing the administrator should check?（）
    A

    Default gateway

    B

    The ports on the switch

    C

    Port security on the server's switch port

    D

    Ethernet cable


    正确答案： D
    解析： 暂无解析

  • 第9题：

    单选题
    A network administrator needs to add an additional connection to a room. The administrator adds a new Ethernet switch and must connect it to an existing switch. Which cable type should be used to connect the two switches?（）
    A

    CAT3 cable

    B

    Serial cable

    C

    Crossover cable

    D

    Rollover cable


    正确答案： B
    解析： 暂无解析

  • 第10题：

    单选题
    A network technician is installing a new managed 10/100 Mbps switch on the network. The network has an older printer with a 10Mbps network adapter that will be moved to the new switch. Which of the following settings on the switch will need to be configured to support the printer?（）
    A

    MAC filtering

    B

    IP address

    C

    PoE

    D

    Port speed


    正确答案： D
    解析： 暂无解析

  • 第11题：

    单选题
    Users report that they are unable to connect to a server. An administrator confirms that it is unreachable across the network. Other administrators have been working in the server room throughout the day.  Which of the following is the NEXT step the administrator should take？（）
    A

     Verify the configuration of the connected port on the network switch.

    B

     Reboot the server.

    C

     Install a new NIC on the server.

    D

     Verify that network cables are connected.


    正确答案： B
    解析： 暂无解析

  • 第12题：

    单选题
    An administrator is having a hard time adding a new switch to the network. After verifying that allthe ports are configured correctly on each switch, which of the following should the administratorverily NEXT?（）
    A

    Straight-through cable is used to connect both switches

    B

    Loopback plug is connected

    C

    Crossover cable is used to connect both switches

    D

    Cable is a rollover cable


    正确答案： D
    解析： 暂无解析

  • 第13题：

    You have just created a new VLAN on your network for inter-VLAN routing.  What is one step that you should include in your VLAN-based implementation and verification plan？（）

    • A、Verify that different native VLANs exist between two switches for security purposes.
    • B、Verify that the switch is configured to allow for trunking on the switch ports.
    • C、Verify that each switch port has the proper IP address space assigned to it for the new VLAN. 
    • D、Verify that the VLAN virtual interface has been correctly created and enabled.

    正确答案:B

  • 第14题：

    You have just created a new VLAN on your network.  What is one step that  you should include in your VLAN based implementation and verification plan？ （）

    • A、Verify that different native VLANs exist between two switches for security purposes.
    • B、Verify that the VLAN was added on all switches with the use of the show vlan command. 
    • C、Verify that the switch is configured to allow for trunking on the switch ports.
    • D、Verify that each switch port has the correct IP address space assigned to it for the new VLAN.

    正确答案:B

  • 第15题：

    Users report that they are unable to connect to a server. An administrator confirms that it is unreachable across the network. Other administrators have been working in the server room throughout the day.  Which of the following is the NEXT step the administrator should take？（）

    • A、 Verify the configuration of the connected port on the network switch.
    • B、 Reboot the server.
    • C、 Install a new NIC on the server.
    • D、 Verify that network cables are connected.

    正确答案:D

  • 第16题：

    You have just created a new VLAN on your network.  What is one step that you should include in your VLAN-based implementation and verification plan？ （）

    • A、Verify that trunked links are configured to allow the VLAN traffic.
    • B、Verify that the switch is configured to allow for trunking on the switch ports.
    • C、Verify that each switch port has the correct IP address space assigned to it for the new VLAN.
    • D、Verify that different native VLANs exist between two switches for security purposes.

    正确答案:A

  • 第17题：

    A network administrator needs to add an additional connection to a room. The administrator adds a new Ethernet switch and must connect it to an existing switch. Which cable type should be used to connect the two switches?（）

    • A、CAT3 cable
    • B、Serial cable
    • C、Crossover cable
    • D、Rollover cable

    正确答案:C

  • 第18题：

    An administrator is having a hard time adding a new switch to the network. After verifying that allthe ports are configured correctly on each switch, which of the following should the administratorverily NEXT?（）

    • A、Straight-through cable is used to connect both switches
    • B、Loopback plug is connected
    • C、Crossover cable is used to connect both switches
    • D、Cable is a rollover cable

    正确答案:C

  • 第19题：

    单选题
    You have just created a new VLAN on your network.  What is one step that you should include in your VLAN-based implementation and verification plan？ （）
    A

    Verify that trunked links are configured to allow the VLAN traffic.

    B

    Verify that the switch is configured to allow for trunking on the switch ports.

    C

    Verify that each switch port has the correct IP address space assigned to it for the new VLAN.

    D

    Verify that different native VLANs exist between two switches for security purposes.


    正确答案： B
    解析： 暂无解析

  • 第20题：

    单选题
    You have just created a new VLAN on your network.  What is one step that  you should include in your VLAN based implementation and verification plan？ （）
    A

    Verify that different native VLANs exist between two switches for security purposes.

    B

    Verify that the VLAN was added on all switches with the use of the show vlan command. 

    C

    Verify that the switch is configured to allow for trunking on the switch ports.

    D

    Verify that each switch port has the correct IP address space assigned to it for the new VLAN.


    正确答案： A
    解析： 暂无解析

  • 第21题：

    单选题
    An administrator replaces the network card in a web server. After replacing the network card some users can access the server but others cannot.  Which of the following is the FIRST thing the administrator should check？（）
    A

     Default gateway

    B

     The ports on the switch

    C

     Port security on the servers switch port

    D

     Ethernet cable


    正确答案： D
    解析： 暂无解析

  • 第22题：

    单选题
    You have just created a new VLAN on your network for inter-VLAN routing.  What is one step that you should include in your VLAN-based implementation and verification plan？（）
    A

    Verify that different native VLANs exist between two switches for security purposes.

    B

    Verify that the switch is configured to allow for trunking on the switch ports.

    C

    Verify that each switch port has the proper IP address space assigned to it for the new VLAN. 

    D

    Verify that the VLAN virtual interface has been correctly created and enabled.


    正确答案： B
    解析： 暂无解析

  • 第23题：

    单选题
    A switch is configured with all ports assigned to vlan 2 with full duplex FastEthernet to segment existing departmental traffic. What is the effect of adding switch ports to a new VLAN on the switch?（）
    A

    More collision domains will be created.

    B

    IP address utilization will be more efficient.

    C

    More bandwidth will be required than was needed previously.

    D

    An additional broadcast domain will be created.


    正确答案： D
    解析： 暂无解析

  • 第24题：

    单选题
    A workgroup switch is configured with all ports assigned to VLAN 2. In addition,all ports are configured as full-duplex FastEthernet. What is the effect of adding switch ports to a new VLAN on this switch?（）
    A

    The additions will create more collision domains.

    B

    IP address utilization will be more efficient.

    C

    More bandwidth will be required than was needed previously.

    D

    An additional broadcast domain will be created.

    E

    The possibility that switching loops will occur will increase dramatically.


    正确答案： C
    解析： 暂无解析

相关内容