单选题An administrator just installed a new RAID controller card into a server. The firmware is current for the controller card. When the server is powered up the administrator notices that the RAID controller card is not recognized during POST. Which of the

题目
单选题
An administrator just installed a new RAID controller card into a server. The firmware is current for the controller card. When the server is powered up the administrator notices that the RAID controller card is not recognized during POST. Which of the following is the cause of the problem？（）
A

The hard drives were not plugged into the server correctly.

B

The controller driver is outdated and needs to be updated from the OEMs website.

C

The firmware for the server is too old and does not support the new RAID controller card.

D

The cable from the controller to the hard drive backplane is not connected.

相似考题

1.An administrator has just upgraded a server from non-hot plug storage to all hot plug storage. The administrator powers up the server, during POST the RAID controller is recognized but none of the drive lights flash.Which of the following should the administrator do FIRST to troubleshoot the problem?（）A. Check the backplane cabling.B. Check the server BIOS.C. Update the RAID controller firmware.D. Install the latest hard drive firmware

2.Which of the following devices would be installed if an administrator wants to control a group of servers from a remote location？（）A、 VLANB、 KVMC、 IP KVMD、 RAID

3.An administrator just installed a new RAID controller card into a server. The firmware is current for the controller card. When the server is powered up the administrator notices that the RAID controller card is not recognized during POST. Which of the following is the cause of the problem？（）A、The hard drives were not plugged into the server correctly.B、The controller driver is outdated and needs to be updated from the OEMs website.C、The firmware for the server is too old and does not support the new RAID controller card.D、The cable from the controller to the hard drive backplane is not connected.

4. An administrator has just upgraded a server from non-hot plug storage to all hot plug storage. Theadministrator powers up the server， during POST the RAID controller is recognized but none of the drivelights flash.  Which of the following should the administrator do FIRST to trouble shoot the problem？（）A、 Check the backplane cabling.B、 Check the server BIOS.C、 Update the RAID controller firmware.D、 Install the latest hard drive firmware.

更多“An administrator just installed a new RAID controller card i”相关问题

  • 第1题：

    Which three should be documented after upgrading a SCSI RAID controller？（）

    • A、 disk utilization
    • B、 installation date
    • C、 adapter baselines
    • D、 location slot of the RAID controller
    • E、 status of the adapter card installation
    • F、 RAID controller information （warranty， specifications etc.）

    正确答案:B,D,F

  • 第2题：

    The administrator has just installed a new memory module into the server. Now， the server is not showing the new memory. Which of the following should the administrator perform FIRST？（）

    • A、System reboot
    • B、Reseat the memory
    • C、Install the latest firmware
    • D、Install the latest driver

    正确答案:B

  • 第3题：

    An administrator recently installed a new array controller into a server. When the server is running POST the controller does not appear as present. Which of the following could be the reason for this?（）

    • A、The server BIOS firmware is out-of-date.
    • B、The server does not have the correct drivers.
    • C、The server hard drives have not begun to spin.
    • D、The server has too little memory installed.

    正确答案:A

  • 第4题：

    A technician installs a SATA controller card and moves the hard drive cable from the system board to the SATA controller. The system POSTs and the controller BIOS recognizes the hard drive but does not boot to the hard drive and start Windows. Which of the following is the MOST likely cause of the problem？（）

    • A、Windows cannot be booted from a controller card.
    • B、The hard drive must have Windows reinstalled because a new controller card was installed.
    • C、The SATA controller card was not set as a boot device in the computer BIOS.
    • D、The new controller must have the correct jumper settings for Windows mode.

    正确答案:C

  • 第5题：

    A System p administrator has just installed a new technology level， but "oslevel -r" does not show the expected technology level.  Which of the following commands would determine which filesets are downlevel（）

    • A、lppchk
    • B、instfix
    • C、oslevel
    • D、installp

    正确答案:B

  • 第6题：

    What is a design consideration when using existing PCIe I/O drawers in a maximum bandwidth/throughput configuration on a new Power 750 system?（）

    • A、The new system requires 1 installed processor card for the GX++ bus adapter
    • B、The new system requires a minimum of 2 installed processor cards for the GX++ bus adapter
    • C、The new system requires a minimum of 3 installed processor cards and the HPC InfiniBand cluster adapter
    • D、The new system requires 1 installed processor card for the GX++ bus adapter and the HPC InfiniBand  cluster adapter

    正确答案:B

  • 第7题：

    单选题
    A system administrator just completed an AIX installation but suspects that not all filesets installed completely. Which command should be run to verify that all filesets are completely installed？（）
    A

    installp

    B

    lslpp

    C

    lppchk

    D

    oslevel


    正确答案： D
    解析： 暂无解析

  • 第8题：

    单选题
    Which of the following devices would be installed if an administrator wants to control a group of servers from a remote location？（）
    A

     VLAN

    B

     KVM

    C

     IP KVM

    D

     RAID


    正确答案： B
    解析： 暂无解析

  • 第9题：

    单选题
    A technician has just installed an upgraded graphics card. The computers power turns off before itfinishes booting. Which of the following is the cause of the problem? （）
    A

    The monitor cannot display the increased resolution that is a feature of the new graphics card.

    B

    The power supply does not provide enough wattage to power the new graphics card.

    C

    The new graphics card is incompatible with the existing processor.

    D

    The computer does not have enough RAM to support the new graphics card.


    正确答案： A
    解析： 暂无解析

  • 第10题：

    单选题
    An administrator recently installed a new array controller into a server. When the server is running POST the controller does not appear as present.  Which of the following could be the reason for this？（）
    A

     The server BIOS firmware is out-of-date.

    B

     The server does not have the correct drivers.

    C

     The server hard drives have not begun to spin.

    D

     The server has too little memory installed.


    正确答案： A
    解析： 暂无解析

  • 第11题：

    单选题
    An administrator has just upgraded a server from non-hot plug storage to all hot plug storage. The administrator powers up the server, during POST the RAID controller is recognized but none of the drive lights flash. Which of the following should the administrator do FIRST to troubleshoot the problem?（）
    A

    Check the backplane cabling.

    B

    Check the server BIOS.

    C

    Update the RAID controller firmware.

    D

    Install the latest hard drive firmware


    正确答案： C
    解析： 暂无解析

  • 第12题：

    多选题
    Which three should be documented after upgrading a SCSI RAID controller？（）
    A

    disk utilization

    B

    installation date

    C

    adapter baselines

    D

    location slot of the RAID controller

    E

    status of the adapter card installation

    F

    RAID controller information （warranty， specifications etc.）


    正确答案： E,A
    解析： 暂无解析

  • 第13题：

    An administrator has just finished physically replacing the system board in a Windows domain controller. Which of the following must be done before booting the server back into Windows?（）

    • A、Update the time and date in the BIOS.
    • B、Update the firmware on the SCSI controller.
    • C、Update the firmware to the latest version.
    • D、Configure IPMI on the new board.

    正确答案:A

  • 第14题：

    A technician installed a new video card on a motherboard which has onboard video. When the monitor was plugged into the new card and the power was turned on, a no signal message appeared on the monitor. Which of the following is MOST likely the issue?（）

    • A、In the BIOS, the onboard video adapter must be disabled.
    • B、The video resolution is set too high.
    • C、The LCD panel is defective.
    • D、The drivers for the new video card must be installed before installing the card.

    正确答案:A

  • 第15题：

    A technician has just installed an upgraded graphics card. The computers power turns off before itfinishes booting. Which of the following is the cause of the problem? （）

    • A、The monitor cannot display the increased resolution that is a feature of the new graphics card.
    • B、The power supply does not provide enough wattage to power the new graphics card.
    • C、The new graphics card is incompatible with the existing processor.
    • D、The computer does not have enough RAM to support the new graphics card.

    正确答案:B

  • 第16题：

    A system administrator has just installed a new maintenance level， but "oslevel -r" does not show the correct maintenance level. What command can be used to determine which filesets are downlevel？（）

    • A、lppchk
    • B、instfix
    • C、fixdist
    • D、maintlvl

    正确答案:B

  • 第17题：

    A company installed a new server to manage its electronic image storage.  They have two distinct image sizes： 2KB and 16KB.  Two distinct arrays are created on a ServeRAID adapter.  The first array will store all of the 2KB images， and the second array will store all the 16KB images.  The RAID stripe size was left at the default size of 8KB.  After installation， a performance problem is identified. According to performance monitoring， 80% of the images are 16KB.  Which of the following will best optimize performance？（）

    • A、Change the stripe size on the RAID controller
    • B、Change the stripe size to 1024K on the RAID controller
    • C、Change the stripe size on the RAID controller for the first array
    • D、Change the stripe size on the RAID controller for the second array

    正确答案:A

  • 第18题：

    单选题
    What is a design consideration when using existing PCIe I/O drawers in a maximum bandwidth/throughput configuration on a new Power 750 system?（）
    A

    The new system requires 1 installed processor card for the GX++ bus adapter

    B

    The new system requires a minimum of 2 installed processor cards for the GX++ bus adapter

    C

    The new system requires a minimum of 3 installed processor cards and the HPC InfiniBand cluster adapter

    D

    The new system requires 1 installed processor card for the GX++ bus adapter and the HPC InfiniBand  cluster adapter


    正确答案： D
    解析： 暂无解析

  • 第19题：

    单选题
    A technician installed a new video card on a motherboard which has onboard video. When the monitor was plugged into the new card and the power was turned on, a no signal message appeared on the monitor. Which of the following is MOST likely the issue?（）
    A

    In the BIOS, the onboard video adapter must be disabled.

    B

    The video resolution is set too high.

    C

    The LCD panel is defective.

    D

    The drivers for the new video card must be installed before installing the card.


    正确答案： A
    解析： 暂无解析

  • 第20题：

    单选题
    An administrator recently installed a known good RAID adapter.  During boot up， the administrator is able to access the RAID configuration utility； however， when the administrator checks for the card in the operating system， it does not show up.  Which of the following should the administrator do FIRST？（）
    A

    Move the RAID adapter to another slot.

    B

    Perform a baseline of the system.

    C

    Contact the reseller of the adapter for a replacement card.

    D

    Check the RAID adapter’s manufacturer for the latest drivers.


    正确答案： A
    解析： 暂无解析

  • 第21题：

    单选题
    A legacy PCI IDE controller card does not recognize a new IDE HDD. Which of the followingmaintenance techniques would BEST resolve this situation?（）
    A

    Perform a BIOS upgrade

    B

    Update the IDE controller's firmware

    C

    Format the HDD on another PC

    D

    Update the IDE controller's driver


    正确答案： A
    解析： 暂无解析

  • 第22题：

    单选题
    An administrator recently installed a new array controller into a server. When the server is running POST the controller does not appear as present. Which of the following could be the reason for this?（）
    A

    The server BIOS firmware is out-of-date.

    B

    The server does not have the correct drivers.

    C

    The server hard drives have not begun to spin.

    D

    The server has too little memory installed.


    正确答案： A
    解析： 暂无解析

  • 第23题：

    单选题
    An administrator has just finished physically replacing the system board in a Windows domain controller.  Which of the following must be done before booting the server back into Windows？（）
    A

     Update the time and date in the BIOS.

    B

     Update the firmware on the SCSI controller.

    C

     Update the firmware to the latest version.

    D

     Configure IPMI on the new board.


    正确答案： D
    解析： 暂无解析

相关内容