单选题An administrator is attempting to start a server from a bootable Linux disk but instead the server boots into Windows. Which of the following is the MOST likely reason for this?（）A The system needs to boot to Windows first, prior to booting into Linux.

题目
单选题
An administrator is attempting to start a server from a bootable Linux disk but instead the server boots into Windows. Which of the following is the MOST likely reason for this?（）
A

The system needs to boot to Windows first, prior to booting into Linux.

B

The OS settings are not set properly for Linux support.

C

The boot order is set incorrectly in the BIOS.

D

The Linux disk is not supported in a Windows environment.

相似考题

1.You are the administrator of a Windows 2000 Server network. On each server, you format a separate system partition and a separate boot partition as NTFS.Several months later, you shut down one of the servers for the maintenance. When you try to restart the server, you receive the following error message "NTLDR is missing. Press any key to restart".You want to install a new NTLDR file on the server, but you do not want to lose any settings you made since the original installation. What should you do?A．Start the computer by using the Windows 2000 Server CD-ROM and choose to repair the installation. Select the Recovery Console and copy the NTLDR file on the CD-ROM to the root of the system volume.B．Start the computer by using the Windows 2000 Server CD-ROM and choose to reinstall. When installation is complete, copy the NTLDR file to the root of the boot volume.C．Start the computer by using a Windows 2000 bootable floppy disk. From the command prompt, run the sfc/scanboot command.D．Start the computer by using a Windows 2000 bootable floppy disk. Run the File Signature Verification utility.

2.An administrator is attempting to start a server from a bootable Linux disk but instead the server boots into Windows. Which of the following is the MOST likely reason for this?()A. The system needs to boot to Windows first, prior to booting into Linux.B. The OS settings are not set properly for Linux support.C. The boot order is set incorrectly in the BIOS.D. The Linux disk is not supported in a Windows environment.

3.You are preparing to install Windows 2000 Server on a new computer. The computer is connected to a network that includes Windows 98 computers and Windows 2000 Server computers.You want to install Windows 2000 Server from source files that are located on a server on the network.What should you do?A．Start the new computer by using a Windows 98 network boot disk. Connect to the network server. Run Winnt32.exe.B．Start the new computer by using Windows 98 network boot disk. Connect to the network server. Run Winnt.exe.C．On a Windows 2000 Server computer, use Makebt32.exe to create installation startup disk. Start the new computer by using the first disk.D．On a Windows 2000 computer, format a floppy disk. Copy NTLDR, boot.ini, Ntdetect.com, Ntbootdd.sys to this disk. Start the new computer by using the disk.

4.An administrator installs a driver,reboots the DC, and logs in to configure the NIC. Once the administrator opens the NIC properties, the server bluescreens and now will no longer boot into Windows.Which of the following is the FIRST thing the administrator should do?（）A. Boot into Last Known Good ConfigurationB. Reseat the NICC. Boot into Safe ModeD. Boot into Directory Services Restore Mode

参考答案和解析
正确答案： C
解析： 暂无解析
更多“An administrator is attempting to start a server from a boot”相关问题

  • 第1题：

    AIX shows the boot order in the following output.hdisk0 hdisk1 blv=hd5 cd0.What will happen when the system administrator reboots the server?()

    A.The server will boot from cd0

    B.The server will boot from hdisk0

    C.The server will boot into SMS mode

    D.The server will boot from hdisk1


    参考答案：D

  • 第2题：

    An administrator has received an update CD with the latest technology level for AIX 5.3. The current operating system level of the server is at base AIX 5.3. What action needs to be taken to apply the new technology level to the server？（）

    • A、Run smit update_all
    • B、Run smit install_all
    • C、Boot from the installation media
    • D、Run the update_all command from the mounted CD

    正确答案:A

  • 第3题：

    An administrator is attempting to recover from a power failure in the data center. Which of the following is the BEST way to recover the servers？（）

    • A、 Bring up the WINS server， the DNS server， then the web server
    • B、 Bring up the web server， the time clock server， then the DHCP server
    • C、 Bring up the backup tape server， the DNS server， then the web server
    • D、 Bring up the active directory server， the DNS server， then the web server

    正确答案:D

  • 第4题：

    A blade server has been configured to boot from SAN.  After an HBA firmware upgrade the blade was rebooted and cannot find the operating system.  Which of the following should the administrator do NEXT to troubleshoot the issue？（）

    • A、Verify all HBA settings.
    • B、Upgrade the blade firmware.
    • C、Upgrade the OS level HBA drivers.
    • D、Set the system to boot from the local disk.

    正确答案:A

  • 第5题：

    An administrator is attempting to start a server from a bootable Linux disk but instead the server boots into Windows. Which of the following is the MOST likely reason for this?（）

    • A、The system needs to boot to Windows first, prior to booting into Linux.
    • B、The OS settings are not set properly for Linux support.
    • C、The boot order is set incorrectly in the BIOS.
    • D、The Linux disk is not supported in a Windows environment.

    正确答案:C

  • 第6题：

    A server will not boot and the administrator needs to run fsck on the filesystems to verify their integrity. Installation media and diagnostic media is unavailable and there is no NIM master defined in this environment. How would the administrator bring the system up to be able to run fsck on all the filesystems？（）

    • A、Boot from the IBM Disaster Recovery boot server thru the network.
    • B、Installation media or diagnostics media is required to acquire the rootvg.
    • C、Boot to maintenance mode， enter a limited function shell， and execute getrootfs hdisk0.
    • D、Hold space bar at boot time to automatically initiate a limited function shell， then enter getrootfs hdisk0.

    正确答案:C

  • 第7题：

    Which action enables an administrator to make a VIO Server automatically activate when the physical machine is powered on?（）

    • A、Ensure the /etc/auto_start file exists on the VIOS.
    • B、Ensure the 'cfgdev -a boot=yes' command has been executed.
    • C、Select the 'Automatically start when the managed system is powered on' option within the VIO Server LPAR profile.
    • D、Add the VIO Server to the 'Automatically start when the managed system is powered on' field on the Managed System properties.

    正确答案:C

  • 第8题：

    While attempting to load a base operating system to a machine， an administrator is receiving bootp timeout error messages. What steps should be followed to troubleshoot communications between the NIM master and the client machine？（）

    • A、View debug logs on NIM master for errors or failures.
    • B、Boot the client machine to SMS， and view the POST Error log.
    • C、Boot the client machine to SMS， setup remote IPL， and execute a ping test.
    • D、Boot the client machine to diagnostics， and ping the client from the NIM master.

    正确答案:C

  • 第9题：

    单选题
    An administrator is attempting to start a server from a bootable Linux disk but instead the serverboots into Windows. Which of the following is the MOST likely reason for this？（）
    A

     The system needs to boot to Windows first， prior to booting into Linux.

    B

     The OS settings are not set properly for Linux support.

    C

     The boot order is set incorrectly in the BIOS.

    D

     The Linux disk is not supported in a Windows environment.


    正确答案： C
    解析： 暂无解析

  • 第10题：

    多选题
    An administrator receives an error when attempting to execute a WebSphere Commerce command and decides to take the following steps to troubleshoot the problem：   Check to see if the request was processed by the WebSphere plug-in but was never received by the WebSphere Application Server  Check for Java errors from EJBs and servlets  Trace WebSphere Commerce Server subsystems and commands  Which of the following files should the administrator check to accomplish these steps？（）
    A

    error.log

    B

    trace.log

    C

    http_plugin.log

    D

    servlet.log

    E

    SystemOut.log


    正确答案： C,D
    解析： 暂无解析

  • 第11题：

    单选题
    An administrator is attempting to recover from a power failure in the data center. Which of the following is the BEST way to recover the servers？（）
    A

     Bring up the WINS server， the DNS server， then the web server

    B

     Bring up the web server， the time clock server， then the DHCP server

    C

     Bring up the backup tape server， the DNS server， then the web server

    D

     Bring up the active directory server， the DNS server， then the web server


    正确答案： D
    解析： 暂无解析

  • 第12题：

    单选题
    AIX shows the boot order in the following output：  hdisk0 hdisk1 blv=hd5 cd0  What will happen when the system administrator reboots the server？（）
    A

    The server will boot from cd0

    B

    The server will boot from hdisk0.

    C

    The server will boot into SMS mode

    D

    The server will boot from hdisk1.


    正确答案： A
    解析： 暂无解析

  • 第13题：

    An administrator installs a driver,reboots the DC, and logs in to configure the NIC. Once the administrator opens the NIC properties, the server bluescreens and now will no longer boot into Windows. Which of the following is the FIRST thing the administrator should do?（）

    • A、Boot into Last Known Good Configuration
    • B、Reseat the NIC
    • C、Boot into Safe Mode
    • D、Boot into Directory Services Restore Mode

    正确答案:C

  • 第14题：

    An administrator is attempting to start a server from a bootable Linux disk but instead the serverboots into Windows. Which of the following is the MOST likely reason for this？（）

    • A、 The system needs to boot to Windows first， prior to booting into Linux.
    • B、 The OS settings are not set properly for Linux support.
    • C、 The boot order is set incorrectly in the BIOS.
    • D、 The Linux disk is not supported in a Windows environment.

    正确答案:C

  • 第15题：

    An administrator notices that every time a particular server is restarted it requires a password in order for the server to begin the start up process. Which of the following is the reason this is happening？（）

    • A、The server needs to have the password service verified and reconfigured.
    • B、The server administrator has set a password policy in Group Policy.
    • C、The server has the BIOS setting configured incorrectly.
    • D、The server is set with a boot password before accessing the OS

    正确答案:D

  • 第16题：

    An administrator adds a new SATA hard drive into a functional server and attempts to boot the server. The server will no longer boot into the operating system. The administrator checks all the connections and reboots the server. The server still will not load the operating system.  Which of the following is the MOST probable cause？（）

    • A、The BIOS is set with the wrong boot order.
    • B、The jumpers have not been set on the hard drive.
    • C、The hard drive is not compatible with the system board.
    • D、The boot.ini file needs to be modified.

    正确答案:A

  • 第17题：

    AIX shows the boot order in the following output.hdisk0 hdisk1 blv=hd5 cd0. What will happen when the system administrator reboots the server?（）

    • A、The server will boot from cd0
    • B、The server will boot from hdisk0
    • C、The server will boot into SMS mode
    • D、The server will boot from hdisk1

    正确答案:D

  • 第18题：

    AIX shows the boot order in the following output： hdisk0  hdisk1 blv=hd5 cd0  What will happen when the system administrator reboots the server？（）

    • A、The server will boot from cd0
    • B、The server will boot from hdisk0
    • C、The server will boot into SMS mode
    • D、The server will boot from hdisk1

    正确答案:B

  • 第19题：

    You are the network administrator for Testking.com. All network servers run Windows Server 2003. A server named Server1 hosts several applications. This server contains two hard disks, Disk0 and Disk1. Each disk is connected to a different EIDE channel. Each disk is configured as a basic disk and formatted as NTFS. System files are installed on Disk1. You install a third hard disk on Server1. You configure it as a basic disk and format it as NTFS. When you restart Server1, you receive the following message: Visit our reseller at www.PrometricVUE.com for lastest version and special price! Leading the way in IT testing and certification tools, www.testking.com "Windows could not start because of a computer disk hardware configuration problem. Could not read the selected boot disk. Check boot path and disk hardware. Please check Windows documentation about hardware disk configuration and your hardware reference manuals for additional information." You press a key. Server1 restarts, but it displays the same message. You need to ensure that Server1 will start correctly. You solution must not require reinstalling any applications on Server1. What should you do?（）

    • A、Start Server1 from the Windows Server 2003 installation CD-ROM. Use the Recovery Console to repair the system.
    • B、Start Server1 in Safe Mode with Command prompt.
    • C、Start Server1 from the Windows Server 2003 installation CD-ROM. Press F6 to replace the Mass Storage driver.
    • D、Reconfigure the new disk drive so it is enumerated after the existing drives. Restart Server1.

    正确答案:A

  • 第20题：

    单选题
    An administrator adds a new SATA hard drive into a functional server and attempts to boot the server. The server will no longer boot into the operating system. The administrator checks all the connections and reboots the server. The server still will not load the operating system.  Which of the following is the MOST probable cause？（）
    A

    The BIOS is set with the wrong boot order.

    B

    The jumpers have not been set on the hard drive.

    C

    The hard drive is not compatible with the system board.

    D

    The boot.ini file needs to be modified.


    正确答案： A
    解析： 暂无解析

  • 第21题：

    单选题
    A server will not boot and the administrator needs to run fsck on the filesystems to verify their integrity. Installation media and diagnostic media is unavailable and there is no NIM master defined in this environment. How would the administrator bring the system up to be able to run fsck on all the filesystems？（）
    A

    Boot from the IBM Disaster Recovery boot server thru the network.

    B

    Installation media or diagnostics media is required to acquire the rootvg.

    C

    Boot to maintenance mode， enter a limited function shell， and execute getrootfs hdisk0.

    D

    Hold space bar at boot time to automatically initiate a limited function shell， then enter getrootfs hdisk0.


    正确答案： B
    解析： 暂无解析

  • 第22题：

    单选题
    A medical customer has an installed HS21 blade with no local disk. They are attempting to set up boot from SAN using a Windows 2003 CD. Which sequence is correct for this procedure? （）
    A

    Install Windows from the CD using the QLogic driver provided on the CD, configure the LUN and zone for the target server, and then configure the blade UEFI to boot from SAN.

    B

    Configure the LUN and zone for the target server, install Windows from the CD and press F6 when prompted to supply the driver, and then configure the QLogic adapter BIOS to boot from SAN. 

    C

    Configure the LUN and zone for the target server, configure the QLogic adapter BIOS to boot from SAN, install Windows from the CD, and then press F6 when prompted to supply the driver. 

    D

    Configure the blade UEFI to boot from SAN, configure the LUN and zone for the target server, and then install Windows from the CD using the QLogic driver provided on the CD


    正确答案： A
    解析： 暂无解析

  • 第23题：

    单选题
    An administrator notices that every time a particular server is restarted it requires a password in order for the server to begin the start up process. Which of the following is the reason this is happening？（）
    A

    The server needs to have the password service verified and reconfigured.

    B

    The server administrator has set a password policy in Group Policy.

    C

    The server has the BIOS setting configured incorrectly.

    D

    The server is set with a boot password before accessing the OS


    正确答案： C
    解析： 暂无解析

相关内容