多选题A server has lost communication to its drives located on a fiber channel SAN.An administrator notices that the indicator lights on both the HBA and the SAN switch are not lit.Which of the following are the MOST likely causes of the problem？（）AFailed HB

第1题：

A server has lost communication to its drives located on a fiber channel SAN.An administrator notices that the indicator lights on both the HBA and the SAN switch are not lit.Which of the following are the MOST likely causes of the problem？（）

• A、Failed HBA
• B、Failed switch port
• C、Faulty fiber cable
• D、Faulty driver
• E、Failed hard drives
• F、Faulty configuration

第2题：

Which of the following expansion cards should be installed in a server to allow the server to connect to a SAN via a fiber channel？（）

• A、SATA
• B、iSCSI
• C、SCSI
• D、HBA

第3题：

A server has five hot pluggable SCSI disk drives in a RAID 5 array.  The server OS crashed and the server will not boot.  The administrator noticed that all of the disk drives have gone offline.Which of the following components would MOST likely have caused the problem？（）

• A、Memory
• B、SCSI backplane
• C、SCSI drives
• D、Motherboard

第4题：

Which of the following expansion cards should be installed in a server to allow the server to connect toa SAN via a fiber channel？ （）

• A、 SATA
• B、 iSCSI
• C、 SCSI
• D、 HBA

第5题：

Which of the following expansion cards should be installed into a server to provide fiber channel SAN connectivity？（）

• A、 HBA
• B、 USB
• C、 UAC
• D、 NIC

第6题：

An administrator has a malfunctioning uninterruptible power supply (UPS). Which of the following is the MOST likely cause of the problem?（）

• A、Battery needs to be replaced
• B、Light switch is turned off
• C、Smart cable is disconnected
• D、UPS needs a firmware update

第7题：

A system administrator has been instructed to attach storage in their client LPARs, in a Power 770, with fibre channel adapters using N_port ID virtualization (NPIV). Which of the following partitions has the minimum requirements to utilize virtual fibre channel?（）

• A、LPAR-A with 1Gb FC HBA and SAN connection
• B、LPAR-B with 2Gb FC HBA and SAN connection
• C、LPAR-C with 4Gb FC HBA and SAN connection
• D、LPAR-D with 8Gb FC HBA and SAN connection

第8题：

第9题：

第10题：

第11题：

第12题：

第13题：

An administrator installs new IDE drives into the company server. Upon starting the machine， the BIOS does not recognize any of the drives. Which of the following is the MOST likely cause of the problem？（）

• A、The jumpers are not set correctly on the drives.
• B、The power supply is not rated high enough to support the additional drives.
• C、The BIOS is not compatible with the drives.
• D、The drives are not powered on.

第14题：

While reviewing the backup logs a server administrator notices that a backup job for an application server on the same subnet has failed. Which of the following is MOST likely the problem？（）

• A、The remote agent was not running.
• B、The management card has failed.
• C、The proxy server was blocking access.
• D、The hardware firewall was blocking access.

第15题：

An administrator logs into a server and notices slow performance.  When the system finishes the logon process a message is displayed saying the system is out of Virtual Memory.  Which of the following is the MOST likely cause of this issue？（）

• A、The drives have been configured as basic.
• B、The system partition with the page file is out of space.
• C、The VMFS has bad sectors.
• D、The drivers for the memory have become corrupt.

第16题：

The staff is not able to access a database server.  The server has an ’Operating System not found’error and is set to boot from a fiber channel SAN. All other database servers are set to boot from the SAN and access the same switch and data as this database server. Which of the following is the MOST likely cause of the problem？（）

• A、The SAN is offline
• B、Fiber channel switch
• C、Multiple failed drives in the SAN
• D、HBA

第17题：

An administrator is configuring RAID 1 in a server.  The administrator has been given two matching 80GB SATA-2 hard drives， two SATA-2 cables， and a SATA-2 RAID adapter.  How should the administrator BEST configure these drives？（）

• A、Install one drive on the first channel and install the second drive on the second channel.
• B、Install one drive on the first cable， on the first channel. Install the second drive on the secondcable， on the second channel.
• C、Install both drives on the same channel. Cable both drives as the primary master on the samecable.
• D、Install both drives on the same channel. On the same cable one drive should be set as primaryslave and the other drive as the primary master.

第18题：

The server administrator has just brought a new Windows server online. Permissions are set， but the server administrator cannot connect remotely. Which of the following is MOST likely the problem？（）

• A、WMI was not enabled.
• B、Server service was not enabled.
• C、RDP was not enabled.
• D、Workstation service was not enabled.

第19题：

A customer’s small heterogeneous enterprise has grown over time to more than 500 client systems， and the administrator cannot add new servers to the management database.  Which of the following is the most likely source of the problem？（）

• A、The management server has reached its size limitation.
• B、Additional agent licenses must be purchased.
• C、The CPU and Memory requirements need to be upgraded.
• D、The default JET database has reached its size limitation.

第20题：

第21题：

第22题：

第23题：