单选题Which of the following actions will prevent a driver from being reinstalled automatically?（）A Run the disable command.B Disable the device using Device Manager.C Review manufacturer manual.D Reboot the server, logon in Safe Mode, uninstall the driver.

题目
单选题
Which of the following actions will prevent a driver from being reinstalled automatically?（）
A

Run the disable command.

B

Disable the device using Device Manager.

C

Review manufacturer manual.

D

Reboot the server, logon in Safe Mode, uninstall the driver.

相似考题

1.Which of the following actions will prevent a driver from being reinstalled automatically?()A. Run the disable command.B. Disable the device using Device Manager.C. Review manufacturer manual.D. Reboot the server, logon in Safe Mode, uninstall the driver.

2.You attach a USB camera to your Windows 2000 Professional computer. Windows 2000 Professional detects the camera and prompts you to install the manufacturer’s device driver. You do it， and then you restart the computer. When Win2000 Professional loads， you notice that your USB keyboard does not respond. You suspect that the camera drivers are not certified for Win2000 Professional. You want to configure your computer to enable your use keyboard and to prevent uncertified drivers from being installed in the future. What should you do？ （）A、Configure Windows 2000 Professional to enable driver signing.B、Configure Windows 2000 Professional to disable driver signing.C、Start the computer by using the recovery console， restore the system state data.D、Start the computer in safe mode， replace the camera driver with a Windows 2000 Professional driver by using Device Manager.E、Start the computer in debug mode， replace the camera driver with a Windows 2000 Professional driver by using Device Manager.

3.You install a SCSI adapter and a SCSI tape drive on your Windows 2000 Professional computer. You start the computer and Windows 2000 Professional detects and installs drivers for the new SCSI devices. Later the same day, you restart your computer. During the startup process, the computer stops loading Windows 2000 Professional. You then restart the computer and it stops again. You want to enable your Windows 2000 Professional computer to start successfully. What should you do?（）A、Start the computer in Safe Mode. Enable driver signing.B、Start the computer in Safe Mode. Use Device Manager to remove the SCSI tape device.C、Start the computer by using the Recovery Console. Repair the Master Boot Record by using the fixmbr command.D、Start the computer by using the Recovery Console. Disable the SCSI adapter device driver by using the disable command.

4.You are installing Windows 2000 Server on a new computer that has a single 10-GB SCSI disk. The disk controller is not included on the current Hardware Compatibility List (HCL). You start the computer by using the Windows 2000 Server CD-ROM.When the computer restarts at the end of the text mode portion of Windows 2000 setup, you receive the following STOP error: "INACCESSIBLE_BOOT_DEVICE."Which two actions should you take to eliminate the STOP error? (Choose Two)A．Restart the Windows 2000 Setup by using the Windows 2000 Server CD-ROM.B．Select Safe Mode from the Windows 2000 boot menu.C．Remove the Windows 2000 Server CD-ROM from the CD-ROM drive.D．Install a driver for the SCSI controller from a floppy disk.E．Use Device Manager to update the driver for the SCSI controller.

更多“单选题Which of the following actions will prevent a driver from being reinstalled automatically?（）A Run the disable command.B Disable the device using Device Manager.C Review manufacturer manual.D Reboot the server, logon in Safe Mode, uninstall the driver.”相关问题

  • 第1题：

    You have a server that runs Windows Server 2003 Service Pack 2 (SP2). You have a third-party hardware device installed. The device uses a third-party driver. The device works properly. The driver’s hardware manufacturer provides a new device driver. You update the device driver, but the device fails to work. You need to ensure that you can use the new hardware device. What should you do? （）

    • A、Connect to Windows Update and install all driver updates.
    • B、From the properties of the device, select Roll Back Driver.
    • C、From Device Manager, uninstall the device and then restart the server.
    • D、From Device Manager, disable the device and then click Scan for hardware changes.

    正确答案:B

  • 第2题：

    A work order states that a customer used Windows updates and after rebooting the computer， the video driver was corrupted and the computer was in safe mode. Which of the following would be the BEST action to take？（）

    • A、Download and install the correct video driver from the manufacturer’s web site.
    • B、Remove the video driver and reboot the computer.
    • C、Use the Driver Roll Back feature in Device Manager.
    • D、Go back to Windows update and specify the correct video driver.

    正确答案:C

  • 第3题：

    Due to slow backup response， an administrator installed a new driver for the SCSI card. After a server reboot the device is not working properly.  Which of the following is the BEST course of action？（）

    • A、Reboot the server and restore files using ASR.
    • B、In Device Manager， locate the device， and click Roll Back Driver at the driver tab.
    • C、Restore the driver from the previous backup tape.
    • D、Go to Device Manager， locate the device， and click Restore Previous Driver at the driver tab.

    正确答案:B

  • 第4题：

    You install a Zip device on your Windows 2000 Professional computer. You reboot your computer only to find out that the computer does not respond at all. You reboot into Safe Mode， and again， the computer does not respond. How do you recover from this problem？（）

    • A、Use the listsvc command to disable the Zip device driver
    • B、Select Recovery Console from the Recovery Menu.
    • C、Use the disable command to disable the Zip device driver
    • D、Select the Debug mode from the Windows 2000 Advanced Options menu
    • E、Insert the Emergency Repair Disk and specify the path of the recovery file on the hard disk
    • F、Start the computer using the Windows 2000 Professional CD-ROM.

    正确答案:B,C,F

  • 第5题：

    You work as an administrator at Company.com handling a Windows 200 network.You install an updated device for the removable storage device on your Windows 2000 Professionalcomputer. You restart the computer. During the startup process the computer stops responding.You then restart the computer in safe mode. During the startup process, the computer stops responding again.   You want to resolve the problem so that the computer starts successfully.  What should you do?（）

    • A、 Use the listvc command to disable the removable storage device driver.
    • B、 Use the disable command to disable the removable storage device driver.
    • C、 Select debug mode from the Windows 2000 Advanced Options menu.
    • D、 Select Recovery Console from the Repair menu.
    • E、 Start the computer by using the Windows 2000 Professional CD-ROM.
    • F、 Insert an Emergency Repair Disk.

    正确答案:B,D,E

  • 第6题：

    You have a server that runs Windows Server 2003 Service Pack 2 (SP2). You have a third-party hardware device installed. The device uses a third-party driver. The device works properly. The driver’s hardware manufacturer provides a new device driver. You update the device driver, but the device fails to work. You need to ensure that you can use the new hardware device. What should you do? （）

    • A、Connect to Windows Update and install all driver updates.
    • B、From the properties of the device, select Roll Back Driver.
    • C、From Device Manager, uninstall the device and then restart the server.
    • D、From Device Manager, disable the device and then click Scan for hardware changes.

    正确答案:B

  • 第7题：

    You install an updated device for the Zip drive on your Windows 2000 Professional computer. You restart the computer.  During the startup process, the computer stops responding.   You then restart the computer in safe mode. During the startup process, the computer stops responding again. You suspect the new device driver is causing the problem. You want to resolve the problem so that the computer starts successfully.   What should you do?（）

    • A、Use the listsvc command to disable the Zip device driver.
    • B、Use the disable command to disable the Zip device driver.
    • C、Select Recovery Console from the Repair menu.
    • D、Select debug mode from the Windows 2000 Advanced Options menu.
    • E、Insert the Emergency Repair Disk.
    • F、Specify the path to the recovery files on the hard disk.
    • G、Start the computer by using the Windows 2000 Professional CD-ROM.

    正确答案:B,C,G

  • 第8题：

    单选题
    You install a new AGP video adapter in your Windows 2000 Professional computer. You install the manufacturer’s device drivers provided with the adapter and reboot your computer to load these drivers. During the startup process， the monitor goes blank and your computer stops responding after that and even does not boot properly. What should you do to solve this problem？ （）
    A

    Start the computer by using Windows 2000 professional CD and then use Emergency Repair Disk. Restore the original adapter driver settings

    B

    Start the computer in the debug mode. Restore the original adapter driver settings

    C

    Start the computer in Safe mode. Rename the AGP device by using device manager

    D

    Start the computer by using the recovery console. Rename the AGP driver. 


    正确答案： A
    解析： 暂无解析

  • 第9题：

    单选题
    A technician is trying to load a device driver directly from the manufacturer’s CD for a PCI NIC. The operating system is Windows Vista. Windows refuses to accept the driver. Which of the following is the MOST likely cause of this problem?（）
    A

    The driver CD is for Windows XP only.

    B

    The technician needs to initialize the NIC first within Device Manager before installing a driver.

    C

    The driver on the CD is not digitally signed.

    D

    The driver is corrupt.


    正确答案： B
    解析： 暂无解析

  • 第10题：

    单选题
    You have a server that runs Windows Server 2003 Service Pack 2 (SP2). You have a third-party hardware device installed. The device uses a third-party driver. The device works properly. The driver’s hardware manufacturer provides a new device driver. You update the device driver, but the device fails to work. You need to ensure that you can use the new hardware device. What should you do? （）
    A

    Connect to Windows Update and install all driver updates.

    B

    From the properties of the device, select Roll Back Driver.

    C

    From Device Manager, uninstall the device and then restart the server.

    D

    From Device Manager, disable the device and then click Scan for hardware changes.


    正确答案： C
    解析： 暂无解析

  • 第11题：

    单选题
    Which of the following actions will prevent a driver from being reinstalled automatically?（）
    A

    Run the disable command.

    B

    Disable the device using Device Manager.

    C

    Review manufacturer manual.

    D

    Reboot the server, logon in Safe Mode, uninstall the driver.


    正确答案： D
    解析： 暂无解析

  • 第12题：

    单选题
    Which of the following actions will prevent a driver from being reinstalled automatically？（）
    A

     Run the disable command.

    B

     Disable the device using Device Manager.

    C

     Review manufacturer manual.

    D

     Reboot the server， logon in Safe Mode， uninstall the driver.


    正确答案： A
    解析： 暂无解析

  • 第13题：

    Which of the following actions will prevent a driver from being reinstalled automatically?（）

    • A、Run the disable command.
    • B、Disable the device using Device Manager.
    • C、Review manufacturer manual.
    • D、Reboot the server, logon in Safe Mode, uninstall the driver.

    正确答案:B

  • 第14题：

    Which of the following mitigation techniques would an administrator apply to a device in order torestrict remote access?（）

    • A、Disable TELNET
    • B、Disable IGMP snooping
    • C、Enable TELNET but not SSL
    • D、Disable ICMP/ping on device

    正确答案:A

  • 第15题：

    A technician is trying to load a device driver directly from the manufacturer’s CD for a PCI NIC. The operating system is Windows Vista. Windows refuses to accept the driver. Which of the following is the MOST likely cause of this problem?（）

    • A、The driver CD is for Windows XP only.
    • B、The technician needs to initialize the NIC first within Device Manager before installing a driver.
    • C、The driver on the CD is not digitally signed.
    • D、The driver is corrupt.

    正确答案:A

  • 第16题：

    You install a 16-Bit ISA sound card on your Windows 2000 Professional computer. You install the manufacturer’s device driver for the sound card. You then restart the computer. During the start up process, the computer stops loading and Windows 2000 Professional. You restart the computer, and again the computer stops loading Windows 2000 Professional computer.  You start the computer in Safe Mode. What should you do next?（）

    • A、Remove the sound card device driver by enabling driver signing.
    • B、Remove the sound card device driver by disabling driver signing.
    • C、Disable the sound card device driver by using the disable command.
    • D、Disable the sound card device driver by using computer management.

    正确答案:D

  • 第17题：

    You install a new AGP video adapter in your Windows 2000 Professional computer. You install the manufacturer’s device drivers provided with the adapter and reboot your computer to load these drivers. During the startup process， the monitor goes blank and your computer stops responding after that and even does not boot properly. What should you do to solve this problem？ （）

    • A、Start the computer by using Windows 2000 professional CD and then use Emergency Repair Disk. Restore the original adapter driver settings
    • B、Start the computer in the debug mode. Restore the original adapter driver settings
    • C、Start the computer in Safe mode. Rename the AGP device by using device manager
    • D、Start the computer by using the recovery console. Rename the AGP driver. 

    正确答案:A

  • 第18题：

    You install Microsoft Windows Vista on a new computer that is not connected to the Internet. After you log on， you receive a warning message about an unknown device.  You need to prevent the display of the warning message until you download an available hardware driver.  What are the two possible ways to achieve this goal？ （）

    • A、Disable the device.
    • B、Uninstall the device.
    • C、Select the Ask me again later option from the warning message details.
    • D、Select the Dont show this message again for this device option from the warning message details.

    正确答案:A,D,N

  • 第19题：

    多选题
    You install an updated device driver for a zip drive on a Windows 2000 Professional computer. You restart the computer. During the startup process, the computer stops responding. You then restart the computer in the Safe Mode. During the startup process, the computer stops responding again. You suspect the new device driver is causing the problem. You want to resolve the problem so that the computer starts successfully.  What should you do?（）
    A

    Use the listsvc command to disable the Zip device driver.

    B

    Use the disable command to disable the Zip device driver.

    C

    Select Recovery Console from the Repair menu.

    D

    Select the debug mode from the Windows 2000 Advanced Options menu.

    E

    Insert the Emergency Repair Disk.

    F

    Specify the path to the recovery file on the hard disk.

    G

    Start the computer by using the Windows 2000 Professional CD-ROM.


    正确答案： B,C,G
    解析： The Recovery Console is a command-line interface that can be used to access a hard disk of a Windows 2000 computer system. It can be accessed from the Windows 2000 Professional installation CD-ROM and can be used to repair an installation of Windows 2000 Professional by repairing the registry or by disabling a device driver or service. To repair an installation of Windows 2000 Professional by disabling a device driver， boot the computer from the Windows 2000 Professional installation CD-ROM. On the Welcome to Setup screen， press R to open the Repair Options screen， and press C to activate the Recovery Console. If you are unsure of the name of the device driver that is causing the problem you can type ‘listsvc’ to obtain a list of the device drivers that currently installed on the computer. Then use the DISABLE command to the disable the Zip device driver. Finally， type ‘exit’ and press enter to restart the computer.

  • 第20题：

    单选题
    You install a 16-Bit ISA sound card on your Windows 2000 Professional computer. You install the manufacturer’s device driver for the sound card. You then restart the computer. During the start up process, the computer stops loading and Windows 2000 Professional. You restart the computer, and again the computer stops loading Windows 2000 Professional computer.  You start the computer in Safe Mode. What should you do next?（）
    A

    Remove the sound card device driver by enabling driver signing.

    B

    Remove the sound card device driver by disabling driver signing.

    C

    Disable the sound card device driver by using the disable command.

    D

    Disable the sound card device driver by using computer management.


    正确答案： D
    解析： 暂无解析

  • 第21题：

    单选题
    You install a SCSI adapter and a SCSI tape drive on your Windows 2000 Professional computer. You start the computer and Windows 2000 Professional detects and installs drivers for the new SCSI devices. Later the same day, you restart your computer. During the startup process, the computer stops loading Windows 2000 Professional. You then restart the computer and it stops again. You want to enable your Windows 2000 Professional computer to start successfully. What should you do?（）
    A

    Start the computer in Safe Mode. Enable driver signing.

    B

    Start the computer in Safe Mode. Use Device Manager to remove the SCSI tape device.

    C

    Start the computer by using the Recovery Console. Repair the Master Boot Record by using the fixmbr command.

    D

    Start the computer by using the Recovery Console. Disable the SCSI adapter device driver by using the disable command.


    正确答案： D
    解析： 暂无解析

  • 第22题：

    单选题
    A work order states that a customer used Windows updates and after rebooting the computer， the video driver was corrupted and the computer was in safe mode. Which of the following would be the BEST action to take？（）
    A

    Download and install the correct video driver from the manufacturer’s web site.

    B

    Remove the video driver and reboot the computer.

    C

    Use the Driver Roll Back feature in Device Manager.

    D

    Go back to Windows update and specify the correct video driver.


    正确答案： B
    解析： 暂无解析

  • 第23题：

    单选题
    Due to slow backup response， an administrator installed a new driver for the SCSI card. After a server reboot the device is not working properly.  Which of the following is the BEST course of action？（）
    A

    Reboot the server and restore files using ASR.

    B

    In Device Manager， locate the device， and click Roll Back Driver at the driver tab.

    C

    Restore the driver from the previous backup tape.

    D

    Go to Device Manager， locate the device， and click Restore Previous Driver at the driver tab.


    正确答案： B
    解析： 暂无解析

  • 第24题：

    单选题
    You have a server that runs Windows Server 2003 Service Pack 2 (SP2). You have a third-party hardware device installed. The device uses a third-party driver. The device works properly. The driver’s hardware manufacturer provides a new device driver. You update the device driver, but the device fails to work. You need to ensure that you can use the new hardware device. What should you do? （）
    A

    Connect to Windows Update and install all driver updates.

    B

    From the properties of the device, select Roll Back Driver.

    C

    From Device Manager, uninstall the device and then restart the server.

    D

    From Device Manager, disable the device and then click Scan for hardware changes.


    正确答案： B
    解析： 暂无解析

相关内容