单选题Before installing a firmware update on a RAID controller which of the following should be done？（）ACheck for corresponding driver updates.BRebuild any arrays on the controller.CCheck for corresponding OS updates.DInstall a redundant BIOS on the controll

题目
单选题
Before installing a firmware update on a RAID controller which of the following should be done？（）
A

 Check for corresponding driver updates.

B

 Rebuild any arrays on the controller.

C

 Check for corresponding OS updates.

D

 Install a redundant BIOS on the controller.

相似考题

1.An administrator has just upgraded a server from non-hot plug storage to all hot plug storage. The administrator powers up the server, during POST the RAID controller is recognized but none of the drive lights flash.Which of the following should the administrator do FIRST to troubleshoot the problem?（）A. Check the backplane cabling.B. Check the server BIOS.C. Update the RAID controller firmware.D. Install the latest hard drive firmware

2. An administrator has just upgraded a server from non-hot plug storage to all hot plug storage. The administrator powers up the server, during POST the RAID controller is recognized but none of the drive lights flash. Which of the following should the administrator do FIRST to troubleshoot the problem?（）A、Check the backplane cabling.B、Check the server BIOS.C、Update the RAID controller firmware.D、Install the latest hard drive firmware

3.IBM ToolsCenter Bootable Media Creator is used to create bootable media. Which of the following functions can be performed with this tool？（）A、Update Firmware， Update Drivers， Run Diagnostics Install WindowsB、Update Firmware， Update Drivers， Run Diagnostics Install Windows and Linux Operating systemsC、Update Firmware， Run Diagnostics， Install WindowsD、Update Firmware， Update Drivers. Install Windows

4.When upgrading the BIOS， which of the following is MOST important？（）A、Check room temperature and humidity.B、Follow manufacturer instructions and documentation.C、Run operating system updates.D、Defragment all the hard drives on the system.

更多“单选题Before installing a firmware update on a RAID controller which of the following should be done？（）A  Check for corresponding driver updates.B  Rebuild any arrays on the controller.C  Check for corresponding OS updates.D  Install a redundant BIOS on the ”相关问题

  • 第1题：

    A technician receives a boot error message OS not found. Which of the following should thetechnician check? （）

    • A、The boot order in the BIOS
    • B、If Plug and Play is enabled
    • C、If the computer is in Safe Mode
    • D、If the BIOS is current

    正确答案:A

  • 第2题：

    An administrator is installing Windows Server 2003 via CD on a new server with an SAS RAIDarray. When the administrator reaches the option to select the target installation drive， there are no drives listed. Which of the following is the FIRST thing the administrator should do？（）

    • A、Restart the installation via WDS.
    • B、Shut down the server and check that all RAID drives are connected properly.
    • C、Restart the installation from CD and press F6 to install RAID drivers.
    • D、Go into the BIOS and set all RAID drives to compatibility mode.

    正确答案:C

  • 第3题：

    Which of the following should be done before and after a service or repair is performed on a server？（）

    • A、 Defrag
    • B、 IPCONFIG /release
    • C、 Firmware update
    • D、 Baseline

    正确答案:D

  • 第4题：

    After booting up a new computer， a technician observes that the USB ports are not working with any USB devices. Which of the following should be done FIRST？（）

    • A、Check the computer to verify that the jumper settings for USB are correct.
    • B、Connect the USB devices to a different computer to test the devices.
    • C、Buy new USB wires and test USB functionality.
    • D、Check the BIOS to verify that USB functionality is enabled.

    正确答案:D

  • 第5题：

    Which of the following should be done during a Windows server OS installation to install third party drivers for a storage array controller？（）

    • A、 Use recovery console from Windows setup.
    • B、 Have the manufacturer’s driver disk in the floppy drive and Windows will install it automatically.
    • C、 Press F6 when prompted during the setup utility.
    • D、 Run setup using the appropriate installation wizard.

    正确答案:C

  • 第6题：

    A printer is consistently printing random characters on every page. Which of the following should be done? （）(Select TWO).

    • A、Power cycle the printer
    • B、Replace the fuser
    • C、Check for paper jams
    • D、Clean the print drum
    • E、Check the printer driver

    正确答案:A,E

  • 第7题：

    单选题
    Which of the following will corrupt the BIOS？（）
    A

     Applying the BIOS settings in the incorrect order

    B

     Power being lost during the upgrade process

    C

     Installing the OS before applying the BIOS upgrade

    D

     Imaging the system after performing a BIOS upgrade


    正确答案： A
    解析： 暂无解析

  • 第8题：

    单选题
    An administrator has just finished physically replacing the system board in a Windows domain controller. Which of the following must be done before booting the server back into Windows？（）
    A

    Update the time and date in the BIOS.

    B

    Update the firmware on the SCSI controller.

    C

    Update the firmware to the latest version.

    D

    Configure IPMI on the new board.


    正确答案： B
    解析： 暂无解析

  • 第9题：

    单选题
    An administrator is installing Windows Server 2003 via CD on a new server with an SAS RAIDarray. When the administrator reaches the option to select the target installation drive， there are no drives listed. Which of the following is the FIRST thing the administrator should do？（）
    A

    Restart the installation via WDS.

    B

    Shut down the server and check that all RAID drives are connected properly.

    C

    Restart the installation from CD and press F6 to install RAID drivers.

    D

    Go into the BIOS and set all RAID drives to compatibility mode.


    正确答案： D
    解析： 暂无解析

  • 第10题：

    单选题
    An administrator is installing Windows Server 2003 via CD on a new server with an SAS RAID array.When the administrator reaches the option to select the target installation drive， there are no drives listed. Which of the following is the FIRST thing the administrator should do？（）
    A

     Restart the installation via WDS.

    B

     Shut down the server and check that all RAID drives are connected properly.

    C

     Restart the installation from CD and press F6 to install RAID drivers.

    D

     Go into the BIOS and set all RAID drives to compatibility mode.


    正确答案： C
    解析： 暂无解析

  • 第11题：

    单选题
    An administrator is installing Windows Server 2003 via CD on a new server with an SAS RAID array. When the administrator reaches the option to select the target installation drive, there are no drives listed. Which of the following is the FIRST thing the administrator should do?（）
    A

    Restart the installation via WDS.

    B

    Shut down the server and check that all RAID drives are connected properly.

    C

    Restart the installation from CD and press F6 to install RAID drivers.

    D

    Go into the BIOS and set all RAID drives to compatibility mode


    正确答案： C
    解析： 暂无解析

  • 第12题：

    单选题
    A technician receives a boot error message OS not found. Which of the following should thetechnician check? （）
    A

    The boot order in the BIOS

    B

    If Plug and Play is enabled

    C

    If the computer is in Safe Mode

    D

    If the BIOS is current


    正确答案： B
    解析： 暂无解析

  • 第13题：

    Which of the following should be done FIRST before installing NOS patches in a production environment？（）

    • A、Install patches on non critical servers
    • B、Install patches in test environment
    • C、Install patches on a PC
    • D、Install patches on critical servers

    正确答案:B

  • 第14题：

    Which two statements about RPF checks in Multicast Source Discovery Protocol （MSDP） are true？（）

    • A、It prevents message looping， Session Advertisement （SA）messages must be RPF checked
    • B、RPF check should be done against the route to the source S of the corresponding PIM-SM domain
    • C、RPF check should be done against the route to the Rendez-vous Point of the corresponding PIM-SM domain，which originated the SA
    • D、RPF checking Session Advertisement （SA） messages will cause message looping

    正确答案:A,C

  • 第15题：

    Before installing a firmware update on a RAID controller which of the following should be done？（）

    • A、 Check for corresponding driver updates.
    • B、 Rebuild any arrays on the controller.
    • C、 Check for corresponding OS updates.
    • D、 Install a redundant BIOS on the controller.

    正确答案:A

  • 第16题：

    Which of the following will corrupt the BIOS?（）

    • A、Applying the BIOS settings in the incorrect order
    • B、Power being lost during the upgrade process
    • C、Installing the OS before applying the BIOS upgrade
    • D、Imaging the system after performing a BIOS upgrade

    正确答案:B

  • 第17题：

    An administrator has just finished physically replacing the system board in a Windows domain controller. Which of the following must be done before booting the server back into Windows?（）

    • A、Update the time and date in the BIOS.
    • B、Update the firmware on the SCSI controller.
    • C、Update the firmware to the latest version.
    • D、Configure IPMI on the new board.

    正确答案:A

  • 第18题：

    An administrator is installing Windows Server 2003 via CD on a new server with an SAS RAID array.When the administrator reaches the option to select the target installation drive， there are no drives listed. Which of the following is the FIRST thing the administrator should do？（）

    • A、 Restart the installation via WDS.
    • B、 Shut down the server and check that all RAID drives are connected properly.
    • C、 Restart the installation from CD and press F6 to install RAID drivers.
    • D、 Go into the BIOS and set all RAID drives to compatibility mode.

    正确答案:C

  • 第19题：

    单选题
    Which of the following should be done during a Windows server OS installation to install third party drivers for a storage array controller？（）
    A

     Use recovery console from Windows setup.

    B

     Have the manufacturer’s driver disk in the floppy drive and Windows will install it automatically.

    C

     Press F6 when prompted during the setup utility.

    D

     Run setup using the appropriate installation wizard.


    正确答案： B
    解析： 暂无解析

  • 第20题：

    单选题
    An administrator has just upgraded a server from non-hot plug storage to all hot plug storage. The administrator powers up the server, during POST the RAID controller is recognized but none of the drive lights flash. Which of the following should the administrator do FIRST to troubleshoot the problem?（）
    A

    Check the backplane cabling.

    B

    Check the server BIOS.

    C

    Update the RAID controller firmware.

    D

    Install the latest hard drive firmware


    正确答案： B
    解析： 暂无解析

  • 第21题：

    单选题
    Which of the following should be done before and after a service or repair is performed on a server？（）
    A

     Defrag

    B

     IPCONFIG /release

    C

     Firmware update

    D

     Baseline


    正确答案： B
    解析： 暂无解析

  • 第22题：

    单选题
    An administrator has just finished physically replacing the system board in a Windows domain controller.  Which of the following must be done before booting the server back into Windows？（）
    A

     Update the time and date in the BIOS.

    B

     Update the firmware on the SCSI controller.

    C

     Update the firmware to the latest version.

    D

     Configure IPMI on the new board.


    正确答案： D
    解析： 暂无解析

  • 第23题：

    单选题
    An administrator has just upgraded a server from non-hot plug storage to all hot plug storage. Theadministrator powers up the server， during POST the RAID controller is recognized but none of the drivelights flash.  Which of the following should the administrator do FIRST to trouble shoot the problem？（）
    A

     Check the backplane cabling.

    B

     Check the server BIOS.

    C

     Update the RAID controller firmware.

    D

     Install the latest hard drive firmware.


    正确答案： B
    解析： 暂无解析

相关内容