将BIOS中primary master hard drive设置为Disable
将CD-ROM设置为primary master hard drive
更改BIOS设置中的启动顺序
在BIOS设置中将CD-ROM设置为可引导
第1题:
下面关于BIOS的描述中哪一项是不正确的()。
第2题:
BIOS设置中的标准BIOS设置可以设置()。
第3题:
BIOS常用的设置包括()
第4题:
让PC机从CD-ROM启动最有效的方法是()。
第5题:
A PC is powered on and begins POST. The PC takes a long time when scanning for drives. The BIOS reports no hard drive can be found but the CD-ROM is identified. The technician knows that there are two hard drives on the primary EIDE controller and a CD-ROM on the secondary EIDE controller. Which of the following is the MOST likely cause of the problem?()
第6题:
开机启动后立即提示两行:Disskette driver 0 seek failure! 处理方法为()。
第7题:
如果要从光驱启动,需在BIOS设置的【Boot】菜单中把第一个启动设备设置为()。
第8题:
时间
启动顺序
硬盘
日期
第9题:
把BIOS设置为硬盘启动
把BIOS设置为光驱启动
把BIOS设置为软驱启动
把BIOS设置为网卡启动
第10题:
禁用主硬盘驱动器
把CD-ROM设置为主驱动器
设置CD-ROM为BIOS引导
在BIOS中改变引导顺序
第11题:
CPU缓存
硬盘
启动顺序
病毒报警
第12题:
Floppy Drive
Removable Drive
Hard Drive
CD-ROM Drive
第13题:
BIOS设置中的高级BIOS设置可以设()。
第14题:
在支持USB设备启动的主板中,USB闪存盘可以引导操作系统,将BIOS设置中的FirstBootDevice设置为USB_ZIP即可。
第15题:
你想把系统设置为从CD-ROM启动,应该怎么做()。
第16题:
要从CD-ROM启动PC,以下哪一项是最有效的方式?()
第17题:
以下BIOS菜单用于设置从光盘启动的是()
第18题:
在设置驱动器启动顺序时,需在哪里设置。()
第19题:
从光驱启动,需把BIOS设置中的【First Boot Device】选项设为()。
第20题:
将主硬盘设置为disable
配置CD-ROM为PrimaryMaster
在CMOS中改变启动顺序
在CMOS中设置CD-ROM为可启动
第21题:
对
错
第22题:
Both hard drives have the master jumper in place.
One hard drive is set as master and the other slave.
The hard drive data cable is reversed.
Both hard drives have the cable select jumper in place.
第23题:
换第一个硬盘
换第二个硬盘
把CD-ROM设置为Slave设
置第二个硬盘为Master