单选题A routing protocol is required that supports: 1)routing update authentication 2)an addressing scheme that conserves IP addresses 3)multiple vendors 4)a network with over 50 routers Which routing protocol fulfills these requirements（）。A RIPv1B RIPv2C EI

题目
单选题
A routing protocol is required that supports: 1)routing update authentication 2)an addressing scheme that conserves IP addresses 3)multiple vendors 4)a network with over 50 routers Which routing protocol fulfills these requirements（）。
A

RIPv1

B

RIPv2

C

EIGRP

D

OSPF

相似考题

1.Intermediate system to intermediate system (IS - IS), is a protocol used by network devices (routers) to determine the best way to forward datagrams through a packet - switched network, a process called routing. Which three attributes are of the IS - IS routing protocol? （）A. supports VLSMB. link - state routing protocolC. operati on is similar to BGPD. supports two routing levels within an autonomous system

2.Which of the following statements are correct in regard to classless routing protocols?()A. Discontiguous subnets are not allowed.B. Variable length subnet masks are allowed.C. RIP v1 is a classless routing protocol.D. IGRP supports classless routing within the same autonomous system.E. RIP v2 supports classless routing.

3.What are some of the characteristics of the OSPF routing protocol?()A. It confines network instability to a single area of network.B. It increases the routing overhead of the networkC. It supports VLSMD. It routes between Autonomous Systems.E. It allows extensive control of routing updatesF. None of the above

4.Which statements are true regarding classless routing protocols?()A. The use of discontiguous subnets is not allowedB. The use of variable length subnet masks is permittedC. RIP v1 is a classless routing protocolD. IGRP supports classless routing within the same autonomous systemE. RIP v2 supports classless routing

更多“A routing protocol is required that supports: 1)routing upda”相关问题

  • 第1题：

    Which two are NOT characteristics of the OSPF routing protocol?()

    A. It confines network instability to a single area of network.

    B. It increases the routing overhead of the network

    C. It supports VLSM

    D. It routes between Autonomous Systems.

    E. It allows extensive control of routing updates


    参考答案：B, D

  • 第2题：

    Which statements describe the routing protocol OSPF?()

    A. It supports VLSM.

    B. It is used to route between autonomous systems.

    C. It confines network instability to one area of the network.

    D. It increases routing overhead on the network.

    E. It allows extensive control of routing updates.

    F. It is simpler to configure than RIP v2.


    参考答案：A, C, E

  • 第3题：

    You need to implement the use of a routing protocol that meets the following requirements: 1. Converges quickly 2. Supports VLSM, CIDR, IP, and IPX. 3. Uses minimal bandwidth for routing updates. Which one of the following routing protocols would be the best choice?（）

    • A、RIPv1
    • B、RIPv2
    • C、IGRP
    • D、OSPF
    • E、EIGRP

    正确答案:E

  • 第4题：

    Which statements describe the routing protocol OSPF?（）

    • A、It supports VLSM.
    • B、It is used to route between autonomous systems.
    • C、It confines network instability to one area of the network.
    • D、It increases routing overhead on the network.
    • E、It allows extensive control of routing updates.
    • F、It is simpler to configure than RIP v2.

    正确答案:A,C,E

  • 第5题：

    Which routing protocol best fits these requirements？（） - Supported by multiple router vendors  - Requires minimum router CPU and memory resources  - Uses a simple routing metric  - Supports manual or automatic route summarization

    • A、 EIGRP
    • B、 OSPF
    • C、 IS-IS
    • D、 RIPv2

    正确答案:D

  • 第6题：

    Which statements are true regarding classless routing protocols?（）

    • A、The use of discontiguous subnets is not allowed
    • B、The use of variable length subnet masks is permitted
    • C、RIP v1 is a classless routing protocol
    • D、IGRP supports classless routing within the same autonomous system
    • E、RIP v2 supports classless routing

    正确答案:B,E

  • 第7题：

    Which two are characteristics of the IS -IS protocol but not OSPF?（）

    • A、forms adjacencies with all neighbors
    • B、supports demand circuit routing
    • C、provides routing support for multiple network layer protocols
    • D、utilizes SPF algorithm
    • E、provides for network scalability by allowing the network to be separated into areas
    • F、three layers of hierarchical routing

    正确答案:A,C

  • 第8题：

    Which two are NOT characteristics of the OSPF routing protocol?（）

    • A、It confines network instability to a single area of network.
    • B、It increases the routing overhead of the network
    • C、It supports VLSM
    • D、It routes between Autonomous Systems.
    • E、It allows extensive control of routing updates

    正确答案:B,D

  • 第9题：

    多选题
    Which statements are true regarding classless routing protocols?（）
    A

    The use of discontiguous subnets is not allowed

    B

    The use of variable length subnet masks is permitted

    C

    RIP v1 is a classless routing protocol

    D

    IGRP supports classless routing within the same autonomous system

    E

    RIP v2 supports classless routing


    正确答案： B,D
    解析： 暂无解析

  • 第10题：

    单选题
    When EIGRP is used as the PE-CE routing protocol which of these statements is correct?（）
    A

    EIGRP can be used only as the PE-CE routing protocol if the PE and CE routers are in the same AS

    B

    Other EIGRP AS routes are automatically advertised to the CE router and do not require a redistribution configuration command to be configured

    C

    Unlike other routing protocols that are used between PE and CE routers, EIGRP supports backdoor links

    D

    Configure of the VPN is only required on the PE router


    正确答案： C
    解析： 暂无解析

  • 第11题：

    单选题
    A routing protocol is required that supports: 1)routing update authentication 2)an addressing scheme that conserves IP addresses 3)multiple vendors 4)a network with over 50 routers Which routing protocol fulfills these requirements（）。
    A

    RIPv1

    B

    RIPv2

    C

    EIGRP

    D

    OSPF


    正确答案： D
    解析： 暂无解析

  • 第12题：

    多选题
    What are some of the characteristics of the OSPF routing protocol?（）
    A

    It confines network instability to a single area of network.

    B

    It increases the routing overhead of the network

    C

    It supports VLSM

    D

    It routes between Autonomous Systems.

    E

    It allows extensive control of routing updates

    F

    None of the above


    正确答案： D,B
    解析： 暂无解析

  • 第13题：

    You need to implement the use of a routing protocol that meets the followingrequirements:1. Converges quickly2. Supports VLSM, CIDR, IP, and IPX.3. Uses minimal bandwidth for routing updates.Which one of the following routing protocols would be the best choice?（）

    A. RIPv1

    B. RIPv2

    C. IGRP

    D. OSPF

    E. EIGRP


    参考答案：E

  • 第14题：

    What are some of the characteristics of the OSPF routing protocol?（）

    • A、It confines network instability to a single area of network.
    • B、It increases the routing overhead of the network
    • C、It supports VLSM
    • D、It routes between Autonomous Systems.
    • E、It allows extensive control of routing updates
    • F、None of the above

    正确答案:A,C,E

  • 第15题：

    A routing protocol is required that supports: 1)routing update authentication 2)an addressing scheme that conserves IP addresses 3)multiple vendors 4)a network with over 50 routers Which routing protocol fulfills these requirements（）。

    • A、RIPv1
    • B、RIPv2
    • C、EIGRP
    • D、OSPF

    正确答案:D

  • 第16题：

    Intermediate system to intermediate system (IS - IS), is a protocol used by network devices (routers) to determine the best way to forward datagrams through a packet - switched network, a process called routing. Which three attributes are of the IS - IS routing protocol? （）

    • A、supports VLSM
    • B、link - state routing protocol
    • C、operati on is similar to BGP
    • D、supports two routing levels within an autonomous system

    正确答案:A,B,D

  • 第17题：

    When implementing MPLS VPNs between CE and PE routers, which of these statements is correct? （）

    • A、If using IS-IS as the PE-CE routing protocol, no redistribution is required.
    • B、If using static routes between the CE and PE routers, no redistribution of other VPN routes is required.
    • C、If the PE-CE protocol is not BGP, redistribution of other VPN routes from MP-BGP is required.
    • D、If RIP is the routing protocol that is used between the PE-CE routers, no redistribution is required, but any other protocol will require redistribution.
    • E、If using OSPF or EIGRP as the PE-CE routing protocol, redistribution is not required, but any other protocol or static route will require redistribution.

    正确答案:C

  • 第18题：

    Which routing protocol supports a flexible area structure using routing levels one and two?（）

    • A、OSPF
    • B、EIGRP
    • C、IS-IS
    • D、BGP

    正确答案:C

  • 第19题：

    Which of the following statements are correct in regard to classless routing protocols?（）

    • A、Discontiguous subnets are not allowed.
    • B、Variable length subnet masks are allowed.
    • C、RIP v1 is a classless routing protocol.
    • D、IGRP supports classless routing within the same autonomous system.
    • E、RIP v2 supports classless routing.

    正确答案:B,E

  • 第20题：

    单选题
    Which routing protocol supports a flexible area structure using routing levels one and two?（）
    A

    OSPF

    B

    EIGRP

    C

    IS-IS

    D

    BGP


    正确答案： B
    解析： 暂无解析

  • 第21题：

    单选题
    Which routing protocol supports a flexible area structure using routing levels one and two？（）
    A

     OSPF

    B

     EIGRP

    C

     IS-IS

    D

     BGP


    正确答案： D
    解析： 暂无解析

  • 第22题：

    单选题
    Which routing protocol best fits these requirements？（） - Supported by multiple router vendors  - Requires minimum router CPU and memory resources  - Uses a simple routing metric  - Supports manual or automatic route summarization
    A

     EIGRP

    B

     OSPF

    C

     IS-IS

    D

     RIPv2


    正确答案： D
    解析： 暂无解析

  • 第23题：

    单选题
    You need to implement the use of a routing protocol that meets the following requirements: 1. Converges quickly 2. Supports VLSM, CIDR, IP, and IPX. 3. Uses minimal bandwidth for routing updates. Which one of the following routing protocols would be the best choice?（）
    A

    RIPv1

    B

    RIPv2

    C

    IGRP

    D

    OSPF

    E

    EIGRP


    正确答案： A
    解析： 暂无解析

  • 第24题：

    多选题
    Which two are NOT characteristics of the OSPF routing protocol?（）
    A

    It confines network instability to a single area of network.

    B

    It increases the routing overhead of the network

    C

    It supports VLSM

    D

    It routes between Autonomous Systems.

    E

    It allows extensive control of routing updates


    正确答案： B,C
    解析： 暂无解析

相关内容