单选题What is the principle reason to use a private IP address on an internal network?（）A Subnet strategy for private companies.B Manage and scale the growth of the internal network.C Conserve public IP addresses so that we do not run out of them.D Allow acc

题目
单选题
What is the principle reason to use a private IP address on an internal network?（）
A

Subnet strategy for private companies.

B

Manage and scale the growth of the internal network.

C

Conserve public IP addresses so that we do not run out of them.

D

Allow access reserved to the devices.

相似考题

1.A computer configured to use DHCP cannot locate a DHCP server. Automatic Private IP Address(APIPA) will assign which of the following addresse?()A.172.16.1.25B.169.254.1.25C.10.16.1.25D.192.168.1.25

2.When is it necessary to use a public IP address on a routing interface?()A. Connect a router on a local network.B. Connect a router to another router.C. Allow distribution of routes between networks.D. Translate a private IP address.E. Connect a network to the Internet.

3.What is the principle reason to use a private IP address on an internal network?()A. Subnet strategy for private companies.B. Manage and scale the growth of the internal network.C. Conserve public IP addresses so that we do not run out of them.D. Allow access reserved to the devices.

4.In any NAT (network address translation) configuration, what is the Inside Global IP address?()A. The summarized address for all internal subnetted addresses.B. A private IP address assigned to a host on the inside network.C. A registered address that represents an inside host to an outside network.D. A unique IP address used on an internal networkE. Non of the above

更多“What is the principle reason to use a private IP address on”相关问题

  • 第1题：

    If all OSPF routers in a single area are configured with the same priority value,what value dose a router use for the ODPF router ID in the absence of a loopback interface?（）

    • A、the IP address of the first Fast Ethernet interface
    • B、the IP address of the console management interface
    • C、the highest IP address among its active interfaces
    • D、the lowest IP address among its active interfaces
    • E、the priority value until a loopback interface is configured

    正确答案:C

  • 第2题：

    A database administrator wants a unique IP address for each of three instances of a database.  Normally，all instances run on a large production node，but they may fallover to different standby nodes according to the dynamic node priority configuration.  What is the best way to obtain unique addresses for each of the three database instances？（）

    • A、 There is no way since this cannot be configured with HACMP
    • B、 Use IP Replacement address takeover and define all service addresses on the same NIC
    • C、 Use IP Aliasing for address takeover and define each alias in a separate resource group
    • D、 Use EtherChannel to map the three alias IP addresses to the common service address defined to HACMP

    正确答案:C

  • 第3题：

    What is the principle reason to use a private IP address on an internal network?（）

    • A、Subnet strategy for private companies.
    • B、Manage and scale the growth of the internal network.
    • C、Conserve public IP addresses so that we do not run out of them.
    • D、Allow access reserved to the devices.

    正确答案:C

  • 第4题：

    What will happen if a private IP address is assigned to a public interface connected to an ISP?（）

    • A、Addresses in a private range will be not routed on the Internet backbone.
    • B、Only the ISP router will have the capability to access the public network.
    • C、The NAT process will be used to translate this address in a valid IP address.
    • D、Several automated methods will be necessary on the private network.
    • E、A conflict of IP addresses happens, because other public routers can use the same range.

    正确答案:A

  • 第5题：

    Which of the following types of NAT allows multiple private internal IP addresses to use a singlepublic external IP address？（）

    • A、NAT mapping
    • B、NAT overloading
    • C、NAT caching
    • D、Static NAT
    • E、Dynamic NAT
    • F、Overlapping NAT

    正确答案:B

  • 第6题：

    For an enterprise to use one of the reserved private IP address ranges, as best practice they shouldcoordinate with:（）

    • A、their legal department
    • B、IANA
    • C、IEEE
    • D、their IT department

    正确答案:D

  • 第7题：

    What is the purpose of a network mask?（）

    • A、It is used to identify the maximum hop count of a subnetwork.
    • B、It is used to identify an IP address as either private or public.
    • C、It is used to identify the network to which an IP address belongs.
    • D、It is used to identify the total number of bits present in an IP address.

    正确答案:C

  • 第8题：

    单选题
    If all OSPF routers in a single area are configured with the same priority value,what value dose a router use for the ODPF router ID in the absence of a loopback interface?（）
    A

    the IP address of the first Fast Ethernet interface

    B

    the IP address of the console management interface

    C

    the highest IP address among its active interfaces

    D

    the lowest IP address among its active interfaces

    E

    the priority value until a loopback interface is configured


    正确答案： B
    解析： 暂无解析

  • 第9题：

    单选题
    For an enterprise to use one of the reserved private IP address ranges, as best practice they shouldcoordinate with:（）
    A

    their legal department

    B

    IANA

    C

    IEEE

    D

    their IT department


    正确答案： D
    解析： 暂无解析

  • 第10题：

    单选题
    In any NAT (network address translation) configuration, what is the Inside Global IP address?（）
    A

    The summarized address for all internal subnetted addresses.

    B

    A private IP address assigned to a host on the inside network.

    C

    A registered address that represents an inside host to an outside network.

    D

    A unique IP address used on an internal network

    E

    Non of the above


    正确答案： B
    解析： 暂无解析

  • 第11题：

    单选题
    What does the "Inside Global" address represent in the configuration of NAT（）。
    A

    the summarized address for all of the internal subnetted addresses

    B

    the MAC address of the router used by inside hosts to connect to the Internet

    C

    a globally unique, private IP address assigned to a host on the inside network

    D

    a registered address that represents an inside host to an outside network


    正确答案： D
    解析： 暂无解析

  • 第12题：

    单选题
    What is the purpose of a network mask?（）
    A

    It is used to identify the maximum hop count of a subnetwork

    B

    It is used to identify an IP address as either private or public

    C

    It is used to identify the network to which an IP address belongs

    D

    It is used to identify the total number of bits present in an IP address


    正确答案： D
    解析： 暂无解析

  • 第13题：

    What does the "Inside Global" address represent in the configuration of NAT?（）

    • A、the summarized address for all of the internal subnetted addresses
    • B、the MAC address of the router used by inside hosts to connect to the Internet
    • C、a globally unique， private IP address assigned to a host on the inside network
    • D、a registered address that represents an inside host to an outside network

    正确答案:D

  • 第14题：

    What is the purpose of a network mask?（）

    • A、It is used to identify the maximum hop count of a subnetwork
    • B、It is used to identify an IP address as either private or public
    • C、It is used to identify the network to which an IP address belongs
    • D、It is used to identify the total number of bits present in an IP address

    正确答案:C

  • 第15题：

    In any NAT (network address translation) configuration, what is the Inside Global IP address?（）

    • A、The summarized address for all internal subnetted addresses.
    • B、A private IP address assigned to a host on the inside network.
    • C、A registered address that represents an inside host to an outside network.
    • D、A unique IP address used on an internal network
    • E、Non of the above

    正确答案:C

  • 第16题：

    When is it necessary to use a public IP address on a routing interface?（）

    • A、Connect a router on a local network.
    • B、Connect a router to another router.
    • C、Allow distribution of routes between networks.
    • D、Translate a private IP address.
    • E、Connect a network to the Internet.

    正确答案:E

  • 第17题：

    Which of the following processes translates a private IP address for a public IP address?（）

    • A、NAT
    • B、DNS
    • C、DHCP
    • D、PAT

    正确答案:A

  • 第18题：

    A system does not have a nameserver defined for IP address resolution. What file does AIX use to determine the IP address of a remote system?（）

    • A、/etc/hosts
    • B、/etc/names
    • C、/etc/rc.tcpip
    • D、/etc/resolv.conf

    正确答案:A

  • 第19题：

    Your network contains a domain controller that has two network connections named Internal and  Private. Internal has an IP address of 192.168.0.20. Private has an IP address of 10.10.10.5.  You need to prevent the domain controller from registering Host (A) records for the 10.10.10.5 IP address.   What should you do（）

    • A、Modify the netlogon.dns file on the domain controller.
    • B、Modify the Name Server settings of the DNS zone for the domain.
    • C、Modify the properties of the Private network connection on the domain controller.
    • D、Disable netmask ordering on the DNS server that hosts the DNS zone for the domain.

    正确答案:C

  • 第20题：

    单选题
    What will happen if a private IP address is assigned to a public interface connected to an ISP?（）
    A

    Addresses in a private range will be not routed on the Internet backbone.

    B

    Only the ISP router will have the capability to access the public network.

    C

    The NAT process will be used to translate this address in a valid IP address.

    D

    Several automated methods will be necessary on the private network.

    E

    A conflict of IP addresses happens, because other public routers can use the same range.


    正确答案： E
    解析： 暂无解析

  • 第21题：

    单选题
    Which of the following types of NAT allows multiple private internal IP addresses to use a singlepublic external IP address？（）
    A

    NAT mapping

    B

    NAT overloading

    C

    NAT caching

    D

    Static NAT

    E

    Dynamic NAT

    F

    Overlapping NAT


    正确答案： B
    解析： 暂无解析

  • 第22题：

    单选题
    When is it necessary to use a public IP address on a routing interface?（）
    A

    Connect a router on a local network.

    B

    Connect a router to another router.

    C

    Allow distribution of routes between networks.

    D

    Translate a private IP address.

    E

    Connect a network to the Internet.


    正确答案： E
    解析： 暂无解析

  • 第23题：

    单选题
    A system does not have a nameserver defined for IP address resolution. What file does AIX use to determine the IP address of a remote system?（）
    A

    /etc/hosts

    B

    /etc/names

    C

    /etc/rc.tcpip

    D

    /etc/resolv.conf


    正确答案： A
    解析： 暂无解析

  • 第24题：

    单选题
    What is the purpose of a network mask?（）
    A

    It is used to identify the maximum hop count of a subnetwork.

    B

    It is used to identify an IP address as either private or public.

    C

    It is used to identify the network to which an IP address belongs.

    D

    It is used to identify the total number of bits present in an IP address.


    正确答案： C
    解析： 暂无解析

相关内容