单选题Refer to the exhibit. What is the meaning of the term dynamic as displayed in the output of the show frame-relay map command shown?（）A The Serial0/0 interface is passing traffic.B The DLCI 100 was dynamically allocated by the routerC The Serial0/0 inte

题目
单选题
Refer to the exhibit. What is the meaning of the term dynamic as displayed in the output of the show frame-relay map command shown?（）
A

The Serial0/0 interface is passing traffic.

B

The DLCI 100 was dynamically allocated by the router

C

The Serial0/0 interface acquired the IP address of 172.16.3.1 from a DHCP server

D

The DLCI 100 will be dynamically changed as required to adapt to changes in the Frame Relay cloud

E

The mapping between DLCI 100 and the end station IP address 172.16.3.1 was learned through Inverse ARP

相似考题

1.An administrator issues the show ip interface s0/0 command and the output displays that interface Serial0/0 is up, line protocol is up.What does "line protocol is up" specifically indicate about the interface?A．The cable is attached properly.B．CDP has discovered the connected device.C．Keepalives are being received on the interface.D．A carrier detect signal has been received from the connected device.E．IP is correctly configured on the interface.

2.Refer to the exhibit. ROUTE Enterprises has many stub networks in their enterprise network, such as router B and its associated network. EIGRP is to be implemented on router A so that neither the prefix for the S/0/0/0 interface nor the prefixes from router B appear in the routing tables for the router in the enterprise network. Which action will accomplish this goal?（）A. Declare router B a stub router using the eigrp stub command.B. Use the passive - interface command for interface Serial0/0/0.C. Use a mask with the network command to exclude interface Serial0/0/0.D. Implement a distribute list to exclude the link prefix from the routi ng updates.

3.Refer to the exhibit. You have completed an OSPF implementation, and you are verifying OSPF operation. You notice that router A and router B are stuck in the two - way state. From the show ip ospf interface command output, what is the cause of this issue?（）A. All OSPF implementations must have at le ast one interface in area 0.B. You are attempting to run in the broadcast mode over an NBMA interface.C. Both routers are configured to function as a BDR; therefore, there is no DR router.D. Someone has changed the OSPF router ID; therefore you must clear the OSPF process.E. The OSPF priority is set to 0 on both routers; therefore neither can become the DR.

4.路由器A的配置为： Quidway#SHOW RUN Now create configuration... Current configuration ! frame-relay switching ! interface Ethernet0 ip address 10.1.1.1 255.255.0.0 ip rip version 2 mcast ! interface Serial0 clock-select DTECLK1 encapsulation frame-relay frame-relay intf-type DCE frame-relay interface-dlci 100 ip address 2.1.1.1 255.0.0.0 ip rip version 2 mcast ! interface Serial1 encapsulation ppp ! interface Serial2 flowcontrol normal async mode dedicated encapsulation ppp ! exit router rip no auto-summary neighbor 2.1.1.2 ! end 路由器B的配置为 Quidway#SHOW RUN Now create configuration... Current configuration ! ! interface Ethernet0 ip address 10.2.1.1 255.255.0.0 ip rip version 2 mcast ! interface Serial0 encapsulation frame-relay ip address 2.1.1.2 255.0.0.0 ip rip version 2 mcast ! interface Serial1 encapsulation ppp ! interface Serial2 flowcontrol normal async mode dedicated encapsulation ppp ! exit router rip no auto-summary neighbor 2.1.1.1 ! End 如下说法正确的是A、两端广域网可以联通，但局域网不可以连通 B、两端广域网不可以连通，但局域网可以连通 C、广域网和局域网都可以连通 D、广域网和局域网都不能连通

更多“单选题Refer to the exhibit. What is the meaning of the term dynamic as displayed in the output of the show frame-relay map command shown?（）A The Serial0/0 interface is passing traffic.B The DLCI 100 was dynamically allocated by the routerC The Serial0/0 inte”相关问题

  • 第1题：

    Refer to the exhibit. Looking at the topology diagram and the partial router configurations shown, which statement is true? ()

    A.The NProuter has two OSPF neighbors in the "Full" adjacency state

    B.The NProuter serial0/0 interface has the OSPF dead timer set to 10 seconds

    C.The NProuter serial0/0 interface has been configured with an OSPF network type of "pointtopoint"

    D.The 10.1.1.1 and 10.1.1.2 routers are not using the default OSPF dead and hello timers setting

    E.The "Mismatched" error is caus ed by the expiration of the OSPF timers


    参考答案：E

  • 第2题：

    The Testking router is running RIP as the routing protocol, and the IP routing table is displayed below:Gateway of last resort is 10.1.2.2 to network 0.0.0.010.0.0.0/24 is subnetted, 2 subnetsR 10.1.3.0 [120/1] via 10.1.2.2, 00:00:00, Serial0/0C 10.1.2.0 is directly connected, Serial0/0C 10.1.5.0 is directly connected, Serial0/1C 10.1.6.0 is directly connected, FastEthernet0/0R* 0.0.0.0/0 [120/1] via 10.1.5.5, 00:00:00, Serial0/1Based on the output above, if an administrator pings host 10.1.8.5 from host10.1.6.100, how will the router TestkingA process the ICMP packets?（）

    A. The packets will be discarded.

    B. The packets will be routed out the S0/0 interface.

    C. The packets will be routed out the S0/1 interface.

    D. The packets will be routed out the Fa0/0 interface.

    E. The packets will be routed through the 10.1.2.2 gateway.


    参考答案：C

  • 第3题：

    Which line from the output of the show ip interface command indicates a layer 1 problem?()

    A. Serial0/1 is up, line protocol is down

    B. Serial0/1 is down, line protocol is down

    C. Serial0/1 is up, line protocol is up

    D. Serial0/1 is administratively down, line protocol is down


    参考答案：B

  • 第4题：

    What two statistics appear in show frame－relay map output?()

    A. The number of FECN packets that are received by the router

    B. The number of BECN packets that are received by the router

    C. The ip address of the local router

    D. The value of the local DLCI

    E. The status of the PVC that is configured on the router


    参考答案：D, E

  • 第5题：

    Refer to the exhibit. The two exhibit devices are the only Cisco devices on the network. The serial network between the two devices has a mask of 255.255.255.252. Given the output that is shown, what three statements are true of these devices? （）

    A.The Manchester serial address is 10.1.1.1

    B.The Manchester serial address is 10.1.1.2

    C.这个Manchester路由器串口地址为：10.1.12

    D.The London router is a Cisco 2610.

    E.The Manchester router is a Cisco 2610.

    F.The CDP information was received on port Serial0/0 of the Manchester router.

    G.The CDP information was sent by port Serial0/0 of the London Router.


    参考答案：A, D, F

  • 第6题：

    Usetheoutputfromtheroutershowninthegraphicabovetodeterminewhichofthefollowingarecorrect.()

    A.Router John uses alink-state routing protocol.

    B.Router John will receive routing updates on the Serial0/0 interface.

    C.Router John will receive routing updates on the Serial0/1 interface.

    D.Router John will send routing updates out the Serial0/0 interface.

    E.Router John will send routing updates out the FastEthernet0/0 interface.

    F.Router John will send routing updates out the Serial0/1 interface.


    参考答案：B, D

  • 第7题：

    Refer to the exhibit. On the basis of the information in the exhibit， which two statements are true？（）

    • A、When traffic is sent from the ISP to autonomous system 64512， the traffic will be forwarded toSanJose2 because of the higher MED value of SanJose2
    • B、The serial 0/0/1 interface on the ISP router has been configured with the set metric 50command
    • C、The output was generated by entering the show ip bgp command on the SanJose1 router
    • D、The output was generated by entering the show ip bgp command on the ISP router
    • E、The serial 0/0/1 interface on the ISP router has been configured with the set metric 75command
    • F、When traffic is sent from the ISP to autonomous system 64512， the traffic will be forwarded toSanJose1 because of the lower MED value of SanJose1

    正确答案:D,F

  • 第8题：

    Refer to the exhibit. What is the meaning of the term dynamic as displayed in the output of the show frame-relay map command shown?（）

    • A、The Serial0/0 interface is passing traffic.
    • B、The DLCI 100 was dynamically allocated by the router
    • C、The Serial0/0 interface acquired the IP address of 172.16.3.1 from a DHCP server
    • D、The DLCI 100 will be dynamically changed as required to adapt to changes in the Frame Relay cloud
    • E、The mapping between DLCI 100 and the end station IP address 172.16.3.1 was learned through Inverse ARP

    正确答案:E

  • 第9题：

    What two statistics appear in show frame-relay map output?（）

    • A、The number of FECN packets that are received by the router
    • B、The number of BECN packets that are received by the router
    • C、The ip address of the local router
    • D、The value of the local DLCI
    • E、The status of the PVC that is configured on the router

    正确答案:D,E

  • 第10题：

    What is shown by the command show interfaces extensive fe-0/0/0 but not shown by the command show interface detail fe-0/0/0？（）

    • A、input error counter
    • B、interface MTU size
    • C、input packets counter
    • D、the IP address on logical interface fe-0/0/0.0

    正确答案:A

  • 第11题：

    单选题
    What is shown by the command show interfaces extensive fe-0/0/0 but not shown by the command show interface detail fe-0/0/0？（）
    A

    input error counter

    B

    interface MTU size

    C

    input packets counter

    D

    the IP address on logical interface fe-0/0/0.0


    正确答案： B
    解析： 暂无解析

  • 第12题：

    单选题
    Which command will allow you to display the configured QoS group and the ingress buffer allocated to each QoS group？（）
    A

     show interface priority-flow-control

    B

     show interface queuing

    C

     show queuing interface

    D

     show policy-map system type queuing

    E

     show policy-map interface ethernet  type queuing


    正确答案： B
    解析： 暂无解析

  • 第13题：

    Refer to the exhibit. What two statements are true?()

    A. This is the designated router (DR) on the FastEthernet 0/0 link.

    B. The output was generated by the show ip interface c ommand.

    C. The router was configured with the commands:r outer ospf 1 network 172.16.6.0 0.0.0.255 area 1

    D. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.

    E. Interface FastEthernet 0/0 was configured with the ipv6 o spf 1 area 1 command.

    F. OSPF version 2 has been enabled to support IPv6.


    参考答案：D, E

  • 第14题：

    Refer to the exhibit. Routers R1 and R2 are running EIGRP and have converged. On the basis of the information that is presented, which statement is true? ()

    A. Both outgoing and incoming routing updates on R1 will be permitted because the d istribute - list 20 out Serial0/0 command cannot be used with association with the outgoing interface.

    B. All incoming routing updates from R2 will be suppressed, but the outgoing updates will continue to be sent.

    C. Both outgoing and incoming routing up dates on R1 will be stopped because of the passive - interface Serial0/0 configuration statement.

    D. All outgoing routing updates from router R1 to router R2 will be suppressed, but the inbound updates will continue to be received.


    参考答案：C

  • 第15题：

    Refer to the exhibit.What is the meaning of the term dynamic as displayed in the output of the show frame－relay map command shown?()

    A.The Seria l0/0interface is passing traffic.

    B.The DLCI 100 was dynamic allyallocated by the router

    C.The Seria l0/0 interf aceacquired the IP address of 172.16.3.1 from a DHCP server

    D.The DLCI 100 will be dynamically changed as required to adapt to changes in the Frame Relay cloud

    E.The mapping between DLCI 100 and the end station IP address 172.16.3.1 was learned through Inverse ARP


    参考答案：E

  • 第16题：

    Refer to the exhibit. What is the meaning of the term dynamic as displayed in the output of the show frame－relay map command shown?()

    A.The Serial0/0 interface is passing traffic.

    B.The DLCI 100 was dynamically allocated by the router

    C.The Serial0/0 interface acquired the IP address of 172.16.3.1 from a DHCP server

    D.The DLCI 100 will be dynamically changed as required to adapt to changes in the Frame Relay cloud

    E.The mapping between DLCI 100 and the end station IP address 172.16.3.1 was learned through Inverse ARP


    参考答案：E

  • 第17题：

    什么是词dynamic的含义显示在显示帧中继map命令的输出显示?()

    A.该的Serial0/0接口被传输流量

    B.该DLCI100是动态路由器分配

    C.该的Serial0/0接口从DHCP服务器获取的172.16.3.1的IP地址

    D.的DLCI100将被动态地改变，以适应变化的帧中继云所需

    E.DLCI100和终端站IP地址172.16.3.1的映射是通过反向ARP学到


    参考答案：E

  • 第18题：

    Use the output from the router shown in the graphic above to determine which of the following are correct.()

    A. Router John uses a link-state routing protocol.

    B. Router John will receive routing updates on the Serial0/0 interface.

    C. Router John will receive routing updates on the Serial0/1 interface.

    D. Router John will send routing updates out the Serial0/0 interface.

    E. Router John will send routing updates out the FastEthernet0/0 interface.

    F. Router John will send routing updates out the Serial0/1 interface.


    参考答案：B, D

  • 第19题：

    在运行OSPF的Quidway路由器上，执行Show ip ospf interface serial0命令，发现接口的状态显示为point-to-point，则说明Serial0接口封装的一定是PPP协议。


    正确答案:错误

  • 第20题：

    Which line from the output of the show ip interface command indicates a layer 1 problem?（）

    • A、Serial0/1 is up, line protocol is down
    • B、Serial0/1 is down, line protocol is down
    • C、Serial0/1 is up, line protocol is up
    • D、Serial0/1 is administratively down, line protocol is down

    正确答案:B

  • 第21题：

    Which command will allow you to display the configured QoS group and the ingress buffer allocated to each QoS group？（）

    • A、 show interface priority-flow-control
    • B、 show interface queuing
    • C、 show queuing interface
    • D、 show policy-map system type queuing
    • E、 show policy-map interface ethernet  type queuing

    正确答案:C

  • 第22题：

    单选题
    The Testking router is running RIP as the routing protocol, and the IP routing table is displayed below: Gateway of last resort is 10.1.2.2 to network 0.0.0.0 10.0.0.0/24 is subnetted, 2 subnets R 10.1.3.0 [120/1] via 10.1.2.2, 00:00:00, Serial0/0 C 10.1.2.0 is directly connected, Serial0/0 C 10.1.5.0 is directly connected, Serial0/1 C 10.1.6.0 is directly connected, FastEthernet0/0 R* 0.0.0.0/0 [120/1] via 10.1.5.5, 00:00:00, Serial0/1 Based on the output above, if an administrator pings host 10.1.8.5 from host 10.1.6.100, how will the router TestkingA process the ICMP packets?（）
    A

    The packets will be discarded.

    B

    The packets will be routed out the S0/0 interface.

    C

    The packets will be routed out the S0/1 interface.

    D

    The packets will be routed out the Fa0/0 interface.

    E

    The packets will be routed through the 10.1.2.2 gateway.


    正确答案： C
    解析： 暂无解析

  • 第23题：

    单选题
    Part of the routing table of router R1 is displayed below：  S 62.99.153.0/24 [1/0] via 209.177.64.130 172.209.12.0/32 is subnetted， 1 subnets D EX 172.209.1 [170/2590720] via 209.179.2.114， 06：47：28， Serial0/0/0.1239 62.113.17.0/24 is variably subnetted， 2 subnets， 2 masks D EX 99.3.215.0/24 [170/27316] via 209.180.96.45， 09：52：10， FastEthernet11/0/0 [170/27316] via 209.180.96.44， 09：52：10， FastEthernet11/0/0 25.248.17.0/24 [90/1512111] via 209.179.66.25， 10：33：13， Serial0/0/0.1400001 [90/1512111] via 209.179.66.41， 10：33：13， Serial0/0/0.1402001 62.113.1.0/24 is variably subnetted， 12 subnets， 2 masks D 62.113.1.227/32 [90/2611727] via 209.180.96.45， 10：33：13， FastEthernet1/0/0 [90/2611727] via 209.180.96.44， 10：33：13， FastEthernet1/0/0 S* 0.0.0.0/0 [1/0] via 209.180.96.14  From analyzing the above command output， what is the administrative distance of the externalEIGRP routes？（）
    A

    24

    B

    32

    C

    90

    D

    170

    E

    27316

    F

    None of the other alternatives apply


    正确答案： F
    解析： 暂无解析

  • 第24题：

    单选题
    Refer to the exhibit. What is the meaning of the term dynamic as displayed in the output of the show frame-relay map command shown?（）
    A

    The Serial0/0 interface is passing traffic.

    B

    The DLCI 100 was dynamically allocated by the router

    C

    The Serial0/0 interface acquired the IP address of 172.16.3.1 from a DHCP server

    D

    The DLCI 100 will be dynamically changed as required to adapt to changes in the Frame Relay cloud

    E

    The mapping between DLCI 100 and the end station IP address 172.16.3.1 was learned through Inverse ARP


    正确答案： A
    解析： 暂无解析

相关内容