多选题RIP version 2 is being used as the routing protocol within the Testking network.What does RIP version 2 use to prevent routing loops?（）ACIDRBSplit horizonCAuthenticationDClassless maskingEHold-down timersFMulticast routing updatesGPath Vectoring

题目
多选题
RIP version 2 is being used as the routing protocol within the Testking network.What does RIP version 2 use to prevent routing loops?（）
A

CIDR

B

Split horizon

C

Authentication

D

Classless masking

E

Hold-down timers

F

Multicast routing updates

G

Path Vectoring

相似考题

1.Which of the following is an interior routing protocol that is used to provide routing within autonomous systems?()A.ARPB.IGPC.BGPD.EGP

2.Which of the following statements are correct in regard to classless routing protocols?()A. Discontiguous subnets are not allowed.B. Variable length subnet masks are allowed.C. RIP v1 is a classless routing protocol.D. IGRP supports classless routing within the same autonomous system.E. RIP v2 supports classless routing.

3.Which dynamic routing protocol should be recommended for the Testking networkshown in the graphic above?()A. OSPFB. RIP version 1C. RIP version 2D. IGRPE. EIGRP

4.Intermediate system to intermediate system (IS - IS), is a protocol used by network devices (routers) to determine the best way to forward datagrams through a packet - switched network, a process called routing. Which three attributes are of the IS - IS routing protocol? （）A. supports VLSMB. link - state routing protocolC. operati on is similar to BGPD. supports two routing levels within an autonomous system

更多“RIP version 2 is being used as the routing protocol within t”相关问题

  • 第1题：

    RIP version 2 is being used as the routing protocol within the Testking network.What does RIP version 2 use to prevent routing loops?()

    A. CIDR

    B. Split horizon

    C. Authentication

    D. Classless masking

    E. Hold-down timers

    F. Multicast routing updates

    G. Path Vectoring


    参考答案：B, E

  • 第2题：

    Which routing protocols can be used within the enterprise network shown in the diagram?()

    A.RIP v1

    B.RIP v2

    C.IGRP

    D.OSPF

    E.BGP

    F.EIGRP


    参考答案：B, D, F

  • 第3题：

    One of the most widely used routing protocols in IP networks is the Routing Information Protocol(RIP)．RIP is the canonical example of a routing protocol built on the (71) algorithm．Routing protocols in internetworks differ slightly from the idealized graph model．In aninternetwork，the goal of the routers to forward packets to various (72) ．

    Routers running RIP send their advertisement about cost every (73) seconds．A router also sends an update message whenever an update from another router causes it to change itsrouting table．

    It is possible to use a range of different metrics or costs for the links in a routing protocol．RIP takes the simplest approach，with all link costs being equal (74) Thus it always tries tofind the minimum hop route．Valid distances are 1 through (75) ．This also limits RIP torunning on fairly small networks．

    （71）

    A．distance vector

    B．link state

    C．flooding

    D．minimum spanning tree


    正确答案：A

  • 第4题：

    One of the most widely used routing protocols in IP networks is the Routing Information Protocol（RIP）。RIP is the canonical example of a routing protocol built on the（ ）algorithm.Routing protocols in internetworks differ slightly from the idealized graph model.In an internetwork,the goal of the routers to forward packets to various（请作答此空）.
    Routers running RIP send their advertisement about cost every（ ）seconds.A router also sends an update message whenever an update from another router causes it to change its routing table.
    It is possible to use a range of different metrics or costs for the links in a routing protocol.RIP takes the simplest approach,with all link costs being equal（ ）。Thus it always tries to find the minimum hop route.Valid distances are 1 through（ ）。This also limits RIP to running on fairly small networks.

    A.computers
    B.routers
    C.switches
    D.networks

    答案：D
    解析：
    参考译文
    IP网络中广泛使用的路由协议之一是路由信息协议（RIP）。RIP是基于路由算法的路由协议。网络中的路由协议与理想的图算法存在少量的差异。在互联网中，路由器的目的是将数据包转发给不同的。
    运行RIP协议的路由器每秒广播一次路由信息，另外，每当路由器收到其他路由器的更新消息而导致其路由表变化时，就会发送更新消息。
    路由协议使用不同的度量或成本来建立连接是可能的。RIP采用了最简单的方法，所有链路的成本都等于。这样，它总是试图寻找跳数最少的路径。有效的距离范围是从1到。这也限制了RIP只能在相当小规模的网络上运行。

  • 第5题：

    RIP version 2 is being used as the routing protocol within the Testking network.What does RIP version 2 use to prevent routing loops?（）

    • A、CIDR
    • B、Split horizon
    • C、Authentication
    • D、Classless masking
    • E、Hold-down timers
    • F、Multicast routing updates
    • G、Path Vectoring

    正确答案:B,E

  • 第6题：

    Which three statements are correct about RIP version 2? (Choose three.)（）

    • A、It has the same maximum hop count as version 1.
    • B、It uses broadcasts for its routing updates.
    • C、It is a classless routing protocol.
    • D、It has a lower default administrative distance than RIP version 1.
    • E、It supports authentication.
    • F、It does not send the subnet mask in updates.

    正确答案:A,C,E

  • 第7题：

    Which statements describe the routing protocol OSPF?（）

    • A、It supports VLSM.
    • B、It is used to route between autonomous systems.
    • C、It confines network instability to one area of the network.
    • D、It increases routing overhead on the network.
    • E、It allows extensive control of routing updates.
    • F、It is simpler to configure than RIP v2.

    正确答案:A,C,E

  • 第8题：

    Which statement about the ip classless router command is true?（）

    • A、The ip classless command is enabled by default in recent versions of IOS.
    • B、The ip classless command should only be enabled when static routing is being used instead of a routing protocol.
    • C、The ip classless command should be enabled by the network administrator whenever RIPv1 or IGRP is being used.
    • D、The ip classless command should be enabled by the network administrator whenever OSPF, RIPv2, or EIGRP is being used.

    正确答案:A

  • 第9题：

    Which of the following is an interior routing protocol that is used to provide routing within autonomous systems?（）

    • A、ARP
    • B、IGP
    • C、BGP
    • D、EGP

    正确答案:B

  • 第10题：

    单选题
    You are a network administrator for your company. The network consists of a single Active Directory domain. All servers run Windows Server 2003. The company’s main office is in Barcelona， and it has branch offices in Paris and London. The company has no immediate plans to expand or relocate the offices.   The company wants to connect the office networks by using a frame relay WAN connection and Routing and Remote Access servers that are configured with frame relay WAN adapters. Computers in each office will be configured to use the local Routing and Remote Access server as a default gateway. You are planning the routing configuration for the Routing and Remote Access servers.   You need to allow computers in Barcelona， Paris， and London to connect to computers in any office. You want to minimize routing traffic on the WAN connection.   What should you do？  （）
    A

     At each office， add the OSPF routing protocol to Routing and Remote Access， add the WAN adapter to the OSPF routing protocol， and deploy OSPF as a single-area internetwork.

    B

     At each office， add the RIP version 2 routing protocol to Routing and Remote Access， and configure the WAN adapter to use RIP version 2. Configure the outgoing packet protocol as RIP version 2 broadcast and the incoming packet protocol as RIP version 1 and 2.

    C

     At each office， add the RIP version 2 routing protocol to Routing and Remote Access， and configure the WAN adapter to use RIP version 2. Configure the outgoing packet protocol as RIP version 2 multicast and the incoming packet protocol as RIP version 2 only.

    D

     At each office， configure the Routing and Remote Access server with static routes to the local networks at the other two offices.


    正确答案： D
    解析： 暂无解析

  • 第11题：

    多选题
    Which three statements are correct about RIP version 2? (Choose three.)（）
    A

    It has the same maximum hop count as version 1.

    B

    It uses broadcasts for its routing updates.

    C

    It is a classless routing protocol.

    D

    It has a lower default administrative distance than RIP version 1.

    E

    It supports authentication.

    F

    It does not send the subnet mask in updates.


    正确答案： D,F
    解析： 暂无解析

  • 第12题：

    单选题
    The network administrator needs to address seven LANs. RIP version 1 is the only routing protocol in use on the network and subnet 0 is not being used. What is the maximum number of usable IP addresses that can be supported on each LAN if the organization is using one class C address block?（）
    A

    8

    B

    6

    C

    30

    D

    32

    E

    14

    F

    16


    正确答案： D
    解析： 暂无解析

  • 第13题：

    You are a network administrator and you need to implement a routing protocol onyour network that provides:* Scalability* VLSM support* Minimal overhead* Support for connecting networks using routers of multiple vendorsWhich of the following routing protocol would best serve your needs?（）

    A. VTP

    B. RIP version 1

    C. EIGRP

    D. OSPF

    E. IGRP

    F. CDP


    参考答案：D

  • 第14题：

    The network administrator needs to address seven LANs. RIP version 1 is the only routing protocol in use on the network and subnet 0 is not being used. What is the maximum number of usable IP addresses that can be supported on each LAN if the organization is using one class C address block?（）

    A.8

    B.6

    C.30

    D.32

    E.14

    F.16


    参考答案：C

  • 第15题：

    One of the most widely used routing protocols in IP networks is the Routing Information Protocol（RIP）。RIP is the canonical example of a routing protocol built on the（ ）algorithm.Routing protocols in internetworks differ slightly from the idealized graph model.In an internetwork,the goal of the routers to forward packets to various（ ）.
    Routers running RIP send their advertisement about cost every（ ）seconds.A router also sends an update message whenever an update from another router causes it to change its routing table.
    It is possible to use a range of different metrics or costs for the links in a routing protocol.RIP takes the simplest approach,with all link costs being equal（ ）。Thus it always tries to find the minimum hop route.Valid distances are 1 through（请作答此空）。This also limits RIP to running on fairly small networks.

    A.6
    B.10
    C.15
    D.16

    答案：C
    解析：
    IP网络中广泛使用的路由协议之一是路由信息协议（RIP）。RIP是基于路由算法的路由协议。网络中的路由协议与理想的图算法存在少量的差异。在互联网中，路由器的目的是将数据包转发给不同的。
    运行RIP协议的路由器每秒广播一次路由信息，另外，每当路由器收到其他路由器的更新消息而导致其路由表变化时，就会发送更新消息。
    路由协议使用不同的度量或成本来建立连接是可能的。RIP采用了最简单的方法，所有链路的成本都等于。这样，它总是试图寻找跳数最少的路径。有效的距离范围是从1到。这也限制了RIP只能在相当小规模的网络上运行。

  • 第16题：

    Which three statements are correct about RIP version 2 (Choose three.)（）。

    • A、It has the same maximum hop count as version 1
    • B、It uses broadcasts for its routing updates
    • C、It is a classless routing protocol
    • D、It has a lower default administrative distance than RIP version 1
    • E、It supports authentication
    • F、It does not send the subnet mask in updates

    正确答案:A,C,E

  • 第17题：

    Which three statements describe the differences between RIP version 1 and RIP version 2? (Choose three.)（）

    • A、RIP version 1 broadcasts updates whereas RIP version 2 uses multicasts.
    • B、RIP version 1 multicasts updates while RIP version 2 uses broadcasts.
    • C、Both RIP version 1 and RIP version 2 are classless routing protocols.
    • D、RIP Version 2 is a classless routing protocol whereas RIP version 1 is a classful routing protocol.
    • E、Both RIP version 1 and version 2 support authentication.
    • F、RIP version 2 sends the subnet mask in updates and RIP version 1 does not.

    正确答案:A,D,F

  • 第18题：

    You are a network administrator and you need to implement a routing protocol on your network that provides: * Scalability * VLSM support * Minimal overhead * Support for connecting networks using routers of multiple vendors Which of the following routing protocol would best serve your needs?（）

    • A、VTP
    • B、RIP version 1
    • C、EIGRP
    • D、OSPF
    • E、IGRP
    • F、CDP

    正确答案:D

  • 第19题：

    Intermediate system to intermediate system (IS - IS), is a protocol used by network devices (routers) to determine the best way to forward datagrams through a packet - switched network, a process called routing. Which three attributes are of the IS - IS routing protocol? （）

    • A、supports VLSM
    • B、link - state routing protocol
    • C、operati on is similar to BGP
    • D、supports two routing levels within an autonomous system

    正确答案:A,B,D

  • 第20题：

    Which of the following statements are correct in regard to classless routing protocols?（）

    • A、Discontiguous subnets are not allowed.
    • B、Variable length subnet masks are allowed.
    • C、RIP v1 is a classless routing protocol.
    • D、IGRP supports classless routing within the same autonomous system.
    • E、RIP v2 supports classless routing.

    正确答案:B,E

  • 第21题：

    You are a network administrator for your company. The network consists of a single Active Directory domain. All servers run Windows Server 2003. The company’s main office is in Barcelona， and it has branch offices in Paris and London. The company has no immediate plans to expand or relocate the offices.   The company wants to connect the office networks by using a frame relay WAN connection and Routing and Remote Access servers that are configured with frame relay WAN adapters. Computers in each office will be configured to use the local Routing and Remote Access server as a default gateway. You are planning the routing configuration for the Routing and Remote Access servers.   You need to allow computers in Barcelona， Paris， and London to connect to computers in any office. You want to minimize routing traffic on the WAN connection.   What should you do？  （）

    • A、 At each office， add the OSPF routing protocol to Routing and Remote Access， add the WAN adapter to the OSPF routing protocol， and deploy OSPF as a single-area internetwork.
    • B、 At each office， add the RIP version 2 routing protocol to Routing and Remote Access， and configure the WAN adapter to use RIP version 2. Configure the outgoing packet protocol as RIP version 2 broadcast and the incoming packet protocol as RIP version 1 and 2.
    • C、 At each office， add the RIP version 2 routing protocol to Routing and Remote Access， and configure the WAN adapter to use RIP version 2. Configure the outgoing packet protocol as RIP version 2 multicast and the incoming packet protocol as RIP version 2 only.
    • D、 At each office， configure the Routing and Remote Access server with static routes to the local networks at the other two offices.

    正确答案:D

  • 第22题：

    多选题
    Which three statements describe the differences between RIP version 1 and RIP version 2? (Choose three.)（）
    A

    RIP version 1 broadcasts updates whereas RIP version 2 uses multicasts.

    B

    RIP version 1 multicasts updates while RIP version 2 uses broadcasts.

    C

    Both RIP version 1 and RIP version 2 are classless routing protocols.

    D

    RIP Version 2 is a classless routing protocol whereas RIP version 1 is a classful routing protocol.

    E

    Both RIP version 1 and version 2 support authentication.

    F

    RIP version 2 sends the subnet mask in updates and RIP version 1 does not.


    正确答案： F,E
    解析： 暂无解析

  • 第23题：

    单选题
    Which statement about the ip classless router command is true?（）
    A

    The ip classless command is enabled by default in recent versions of IOS.

    B

    The ip classless command should only be enabled when static routing is being used instead of a routing protocol.

    C

    The ip classless command should be enabled by the network administrator whenever RIPv1 or IGRP is being used.

    D

    The ip classless command should be enabled by the network administrator whenever OSPF, RIPv2, or EIGRP is being used.


    正确答案： A
    解析： 暂无解析

相关内容