多选题Which destination addresses will be used by Host A to send data to Host C?（）Athe IP address of Switch 1Bthe MAC address of Switch 1Cthe IP address of Host CDthe MAC address of Host CEthe IP address of the router's E0 interfaceFthe MAC address of the ro

题目
多选题
Which destination addresses will be used by Host A to send data to Host C?（）
A

the IP address of Switch 1

B

the MAC address of Switch 1

C

the IP address of Host C

D

the MAC address of Host C

E

the IP address of the router's E0 interface

F

the MAC address of the router's E0 interface

相似考题

1.An IPv6 host is configured to request a specific path through the network to reach a destination.Which IPv6 extension header should be used?()A. RoutingB. Hop-by-HopC. FragmentationD. Destination Options

2.A host on the LAN is accessing an FTP server across the Internet. Which of the following addresses could appear as a source address for the packets forwarded by the router to the destination server()。A.10.10.0.1B.10.10.0.2C.199.99.9.33D.199.99.9.57E.200.2.2.17F.200.2.2.18

3.We have already covered the topic of network addresses. The first（） in a block (in classes A,B,and C) defines the network address. In classes A,B,and C,if the hostid is all ls, the address is called a direct broadcast address. It is used by a.（72） to send a packet to all hosts in a specific network. All hosts will accept a packet having this type of destination address. Note that this address can be used only as a （73）address in an lP packet. Note also that this special address also reduces the number of available hostid for each netid in classes A,B,and C. In classes A,B,and C,an address with all Is for the netid and hostid (32 bits) defines a（74） address in the current network.A host that wants to send a message to every other host can use this address as a destination address in an IP packet. However,a router will block a packet having this type ofaddress to confine the broadcasting to the （75） network. Note that this address belongs to class E.A.datagram B.function C.address D.service

4.Which two statements are true about the command ip route 172.16.3.0 255.255.255.0 192.168.2.4 (Choose two.)()。A.It establishes a static route to the 172.16.3.0 networkB.It establishes a static route to the 192.168.2.0 networkC.It configures the router to send any traffic for an unknown destination to the 172.16.3.0 networkD.It configures the router to send any traffic for an unknown destination out the interface with the address 192.168.2.4E.It uses the default administrative distanceF.It is a route that would be used last if other routes to the same destination exist

更多“Which destination addresses will be used by Host A to send d”相关问题

  • 第1题：

    We have already covered the topic of network addresses. The first（71） in a block (in classes A,B,and C) defines the network address. In classes A,B,and C,if the hostid is all ls, the address is called a direct broadcast address. It is used by a.（72） to send a packet to all hosts in a specific network. All hosts will accept a packet having this type of destination address. Note that this address can be used only as a （）address in an lP packet. Note also that this special address also reduces the number of available hostid for each netid in classes A,B,and C.
    In classes A,B,and C,an address with all Is for the netid and hostid (32 bits) defines a（74） address in the current network.A host that wants to send a message to every other host can use this address as a destination address in an IP packet. However,a router will block a packet having this type ofaddress to confine the broadcasting to the （75） network. Note that this address belongs to class E.

    A.source
    B.destination
    C.local
    D.remote

    答案：B
    解析：

  • 第2题：

    Which two statements are true about the command ip route 172.16.3.0 255.255.255.0 192.168.2.4 (Choose two.)（）。

    • A、It establishes a static route to the 172.16.3.0 network
    • B、It establishes a static route to the 192.168.2.0 network
    • C、It configures the router to send any traffic for an unknown destination to the 172.16.3.0 network
    • D、It configures the router to send any traffic for an unknown destination out the interface with the address 192.168.2.4
    • E、It uses the default administrative distance
    • F、It is a route that would be used last if other routes to the same destination exist

    正确答案:A,E

  • 第3题：

    Which two statements are true about the command ip route 172.16.3.0 255.255.255.0 192.168.2.4? (Choose two.)（）

    • A、It establishes a static route to the 172.16.3.0 network.
    • B、It establishes a static route to the 192.168.2.0 network.
    • C、It configures the router to send any traffic for an unknown destination to the 172.16.3.0 network.
    • D、It configures the router to send any traffic for an unknown destination out the interface with the address 192.168.2.4.
    • E、It uses the default administrative distance.
    • F、It is a route that would be used last if other routes to the same destination exist.

    正确答案:A,E

  • 第4题：

    Host 1 is trying to communicate with Host 2. The e0 interface on Router C is down. Which of the following are true?（）

    • A、Router C will use ICMP to inform Host 1 that Host 2 cannot be reached.
    • B、Router C will use ICMP to inform Router B that Host 2 cannot be reached.
    • C、Router C will use ICMP to inform Host 1, Router A, and Router B that Host 2 cannot be reached.
    • D、Router C will send a Destination Unreachable message type.
    • E、Router C will send a Router Selection message type.
    • F、Router C will send a Source Quench message type.

    正确答案:A,D

  • 第5题：

    A host on the LAN is accessing an FTP server across the Internet. Which of the following addresses could appear as a source address for the packets forwarded by the router to the destination server（）。

    • A、10.10.0.1
    • B、10.10.0.2
    • C、199.99.9.33
    • D、199.99.9.57
    • E、200.2.2.17
    • F、200.2.2.18

    正确答案:D

  • 第6题：

    Which two statements are true about the command ip route 172.16.3.0 255.255.255.0 192.168.2.4?（）

    • A、It establishes a static route to the 172.16.3.0 network.
    • B、It establishes a static route to the 192.168.2.0 network.
    • C、It configures the router to send any traffic for an unknown destination to the 172.16.3.0 network.
    • D、It configures the router to send any traffic for an unknown destination out the interface with the address 192.168.2.4.
    • E、It uses the default administrative distance.
    • F、It is a route that would be used last if other routes to the same destination exist.

    正确答案:A,E

  • 第7题：

    Which of the following will list the destination MAC addresses？（）

    • A、ping
    • B、dig
    • C、nbtstat
    • D、arp

    正确答案:D

  • 第8题：

    多选题
    Which two statements are true about the command ip route 172.16.3.0 255.255.255.0 192.168.2.4 (Choose two.)（）。
    A

    It establishes a static route to the 172.16.3.0 network

    B

    It establishes a static route to the 192.168.2.0 network

    C

    It configures the router to send any traffic for an unknown destination to the 172.16.3.0 network

    D

    It configures the router to send any traffic for an unknown destination out the interface with the address 192.168.2.4

    E

    It uses the default administrative distance

    F

    It is a route that would be used last if other routes to the same destination exist


    正确答案： D,C
    解析： 暂无解析

  • 第9题：

    单选题
    An IPv6 host is configured to request a specific path through the network to reach a destination.Which IPv6 extension header should be used?（）
    A

    Routing

    B

    Hop-by-Hop

    C

    Fragmentation

    D

    Destination Options


    正确答案： C
    解析： 暂无解析

  • 第10题：

    单选题
    A host on the LAN is accessing an FTP server across the Internet. Which of the following addresses could appear as a source address for the packets forwarded by the router to the destination server（）。
    A

    10.10.0.1

    B

    10.10.0.2

    C

    199.99.9.33

    D

    199.99.9.57

    E

    200.2.2.17

    F

    200.2.2.18


    正确答案： C
    解析： 暂无解析

  • 第11题：

    多选题
    Host 1 is trying to communicate with Host 2. The e0 interface on Router C is down. Which of the following are true? （）
    A

    Router C will use ICMP to inform Host 1 that Host 2 cannot be reached.

    B

    Router C will use ICMP to inform Router B that Host 2 cannot be reached.

    C

    Router C will use ICMP to inform Host 1, Router A, and Router B that Host 2 cannot be reached.

    D

    Router C will send a Destination Unreachable message type.

    E

    Router C will send a Router Selection message type.

    F

    Router C will send a Source Quench message type.


    正确答案： A,F
    解析： 暂无解析

  • 第12题：

    单选题
    What is the purpose of a network mask?（）
    A

    It is used in conjunction with the wildcard mask to determine the number of hosts on a network

    B

    It is used to define which parts of the IP address are allocated to host addresses and network prefixes

    C

    It is used to hide subnets from external networks by masking the subnets with NAT

    D

    It is used to differentiate a network as a classful network or a classless network


    正确答案： B
    解析： 暂无解析

  • 第13题：

    When multiple routers are used in interconnected networks,the routers exchange information about （ ） using a dynamic routing protocol.

    A.destination addresses
    B.IP addresses
    C.work addresses
    D.router addresses

    答案：A
    解析：
    翻译：当多个路由器进行互联的网络，对目的地址使用动态路由协议的路由器交换信息。 A．目标地址 B．IP地址 C．工作地址 D．路由地址

  • 第14题：

    Host 1 has just started up and requests a web page from web server 2. Which two statements describe steps in the process Host 1 uses to send the request to web server 2 (choose two)（）。

    • A、Host 1 addresses the frames to the MAC address of router R1
    • B、Host 1 looks in its ARP cache for the MAC address of router R1
    • C、Host 1 addresses the frames to the MAC address of web server 2
    • D、Host 1 sends the packets to router R1 to be forwarded to web server 2
    • E、Host 1 sends a broadcast ARP request to obtain the MAC address of webserver2

    正确答案:C,E

  • 第15题：

    What is the purpose of a network mask?（）

    • A、It is used in conjunction with the wildcard mask to determine the number of hosts on a network
    • B、It is used to define which parts of the IP address are allocated to host addresses and network prefixes
    • C、It is used to hide subnets from external networks by masking the subnets with NAT
    • D、It is used to differentiate a network as a classful network or a classless network

    正确答案:B

  • 第16题：

    A Cisco UCS fabric interconnect in end-host mode learns MAC addresses on which port types？（）

    • A、 Uplink Ethernet ports or border ports
    • B、 Appliance ports
    • C、 Server ports
    • D、 Fabric ports
    • E、 Backplane ports
    • F、 vEth interfaces
    • G、 A Fabric Interconnect doesn’t learn MAC addresses in End Host mode. Pinning is used instead.

    正确答案:B,C,E,F

  • 第17题：

    Which destination addresses will be used by Host A to send data to Host C?（）

    • A、the IP address of Switch 1
    • B、the MAC address of Switch 1
    • C、the IP address of Host C
    • D、the MAC address of Host C
    • E、the IP address of the router's E0 interface
    • F、the MAC address of the router's E0 interface

    正确答案:C,F

  • 第18题：

    When running a Windows server， which option is used with the ping command to convert numerical addresses to host names？（）

    • A、 -r
    • B、 -a
    • C、 -v
    • D、 -n

    正确答案:B

  • 第19题：

    An IPv6 host is configured to request a specific path through the network to reach a destination.Which IPv6 extension header should be used?（）

    • A、Routing
    • B、Hop-by-Hop
    • C、Fragmentation
    • D、Destination Options

    正确答案:A

  • 第20题：

    单选题
    When running a Windows server， which option is used with the ping command to convert numerical addresses to host names？（）
    A

    -r

    B

    -a

    C

    -v

    D

    -n


    正确答案： D
    解析： 暂无解析

  • 第21题：

    多选题
    A Cisco UCS fabric interconnect in end-host mode learns MAC addresses on which port types？（）
    A

    Uplink Ethernet ports or border ports

    B

    Appliance ports

    C

    Server ports

    D

    Fabric ports

    E

    Backplane ports

    F

    vEth interfaces

    G

    A Fabric Interconnect doesn’t learn MAC addresses in End Host mode. Pinning is used instead.


    正确答案： F,C
    解析： 暂无解析

  • 第22题：

    多选题
    Which destination addresses will be used by Host A to send data to Host C?（）
    A

    the IP address of Switch 1

    B

    the MAC address of Switch 1

    C

    the IP address of Host C

    D

    the MAC address of Host C

    E

    the IP address of the router's E0 interface

    F

    the MAC address of the router's E0 interface


    正确答案： D,B
    解析： 暂无解析

  • 第23题：

    多选题
    Host 1 is trying to communicate with Host 2. The e0 interface on Router C is down. Which of the following are true (Choose two.)（）。
    A

    Router C will use ICMP to inform Host 1 that Host 2 cannot be reached

    B

    Router C will use ICMP to inform Router B that Host 2 cannot be reached

    C

    Router C will use ICMP to inform Host 1, Router A, and Router B that Host 2 cannot be reached

    D

    Router C will send a Destination Unreachable message type

    E

    Router C will send a Router Selection message type

    F

    Router C will send a Source Quench message type


    正确答案： C,D
    解析： 暂无解析

  • 第24题：

    单选题
    When running a Windows server， which option is used with the ping command to convert numerical addresses to host names？（）
    A

     -r

    B

     -a

    C

     -v

    D

     -n


    正确答案： D
    解析： 暂无解析

相关内容