set out
set off
get off
cut off
第1题:
第2题:
他们应该明白不同报警信号的意义。()
第3题:
This fire extinguisher is to be used only in case of()
第4题:
fire fighting
leakage blocking
abandon ship
integration
第5题:
turbine
screw
vane
ejector
第6题:
proceeding
overloading
collision
flooding
第7题:
DSL
POTS
VDSL
Smart jack
第8题:
the emergency lighting system for muster and abandon ship
air oil emergency shut-down
ME emergency operation
main auxiliary steering gear changing
第9题:
stop the flow of oil at the main deck manifold
prevent the oil from leaving the shore facility
prevent the oil from siphoning through the pump
None of the above
第10题:
put out
set out
set on
put on
第11题:
stop the flow of oil at the main deck manifold
prevent the oil from leaving the shore facility
prevent the oil from siphoning through the pump
None of the above
第12题:
after control of fire,flooding,and structural repairs
immediately,before the emergency is under control
after control of fire,but before control of flooding
after stability is restored
第13题:
第14题:
The signals that will be used for emergency should be clearly set out.()
第15题:
What is the difference between 1+1 and 1:1 protection switching?()
第16题:
always
never
sonetimes
sometime
第17题:
injection valve
relief valve
discharge valve
inlet filter
第18题:
Immediately use all the signals at once
Use all the signals during the first night
Employ a signal every hour after abandoning ship until they are gone
Use them only when you are aware of a ship or plane in the area
第19题:
They should be clear about all fire-fighting equipment..
They should be understood about the meaning of the different alarm signals.
They should be clear about all life-saving equipment.
They should be clear about the meaning of the different alarm signals.
第20题:
The generator and bus transfer section
The 450 volt, 60 cycle, 3 phase bus
The 120 volt, 3 phase, 60 cycle bus
The 24 volt DC bus
第21题:
1+1 is based on APS, while 1:1 is based on IPS.
1:1 is used in SNCP switching, while 1+1 is used in MS-SPRing switching.
1+1 sends signals on Working and Protect paths, while 1:1 sends signals only on Working path.
1+1 sends signals on Working path ONLY, while 1:1 sends signals on both Working and Protect paths.
第22题:
know
familiarize
familiar
familiarity
第23题:
Only one pump should be used at any time
The ship speed should be reduced to 70% of the normal
Watch keeping of the steering gear should be increased
Limitations of the steering gear should be logged but the bridge need not be informed
第24题:
用于应急和消防部署的信号必须清楚地说出。
用于救生和消防部署的信号必须清楚地列出。
用于应急的信号必须清楚地列出。
用于应急和救生部署的演习必须清楚地列出。