This out-of-band approach supports scaling
SLB· is not inline.
Mode is not as common as bridge or routed mode.
Return traffic requires PB·R, server default gateway pointing to SLB·, or client source NAT·
第1题:
A. The design supports multiple server subnets.
B. An end-user sees the IP address of the real server.
C. SLB routes between the outside and inside subnets.
D. The source or destination MAC address is rewritten, but the IP addresses left alone.
E. SLB acts as a "bump in the wire" between servers and upstream firewall or Layer 3 devices.
第2题:
SSS默认SLB全局数据配置中未注册触发的标志是()。
第3题:
Which of the following is true when considering the Server load-balancing design within the E-Commerce Module of the Enterprise Campus network?()
第4题:
As an experienced technician, you are responsible for Technical Support. Which of the followingdescriptions is correct about the characteristic of SLB one arm mode?()
第5题:
As an experienced technician, you are responsible for Technical Support in your company. One of the trainees is asking you which Cisco VPN Acceleration Module for Cisco 7200 Series routers and the Cisco 7301 provides high-performance encryption/compression and supports the latest encryption standard. Which of the following will answer his question?()
第6题:
The Cisco IOS SLB feature is a Cisco IOS-based solution that provides server load balancing.This feature allows you to define a virtual server that represents a cluster of real servers, known as a server farm.When a client initiates a connection to the virtual server, the IOS SLB load balances the connection to a chosen real server, depending on the configured load balance algorithm or predictor.Which three implementation modes may be used to deploy SLB? ()
第7题:
As an experienced technician, you are responsible for Technical Support. One of the trainees isasking your advice on VPN Termination Device and Firewall Placement. Which of the following approaches will you recommend?()
第8题:
show redundancy states, redundancy, mode sso
show redundancy states, mode sso, redundancy
redundancy, mode sso, show redundancy states
mode sso, redundancy, show redundancy states
第9题:
Routed mode requires the ACE run OSPF or EIGRP
Bridged mode switches a packet between the public and the private subnets when it sees itsMAC address as the destination
Two-armed mode will place the SLB inline to the servers, with different client-side and a server-side VLANs
One-armed mode, which uses the same VLAN for the client, the ACE, and the servers, requiresa traffic-diversion mechanism to ensure the traffic return from the server passes though the ACE
第10题:
inline with a firewall
in a DMZ outside the firewall
parallel with a firewall
in a DMZ behind the firewall
第11题:
inline with a firewall
in a DMZ outside the firewall
parallel with a firewall
in a DMZ behind the firewall
第12题:
Cisco Direct Attached Storage
Cisco Virtual Attached Storage Network
Cisco Virtual Storage Area Network
Cisco Direct Storage Area Network
第13题:
The Cisco IOS SLB feature is a Cisco IOS-based solution that provides server load balancing.This feature allows you to define a virtual server that represents a cluster of real servers, known as a server farm.When a client initiates a connection to the virtual server, the IOS SLB load balances the connection to a chosen real server, depending on the configured load balance algorithm or predictor.Which three implementation modes may be used to deploy SLB? ()
A. Router mode
B. One-arm mode
C. Three-arm mode
D. Bridge mode inline
第14题:
As an experienced technician, you are required to configure and verify SRM with SSO redundancy. In such a situation, you have to issue several commands in proper orders. Which of the following is correct?()
第15题:
What are two characteristics of the SLB One-arm mode? ()
第16题:
As an experienced technician, you are responsible for Technical Support. Which of the following descriptions is correct about the characteristic of SLB one arm mode?()
第17题:
Which three statements about firewall modes are correct? ()
第18题:
As an experienced technician, you are responsible for Technical Support in your company. One of the trainees is asking you how to create separate networks on one Storage Area Network so as to provide enhanced availability, security, etc. Which of the following solution will enable that?()
第19题:
A firewall in routed mode has one IP address
A firewall in transparent mode has one IP address
In routed mode, the firewall is considered to be a Layer 2 dew
In routed mode, the firewall is considered to be a Layer 3 device
In transparent mode, the firewall is considered to be a Layer 2 device
In transparent mode, the firewall is considered to be a Layer 3 device
第20题:
It is not as common as bridge mode
The MSFC is not directly connected to the CSM
Outbound traffic from servers may need to be directed by PBR or CSNAT to the CSM
The SLB is moved to a position where selected inbound and outbound server traffic goesthrough the SLB
The CSM statically routes inbound server traffic to the aggregation switch FWSM, then to the connected server subnet
第21题:
This out-of-band approach supports scaling
SLB· is not inline.
Mode is not as common as bridge or routed mode.
Return traffic requires PB·R, server default gateway pointing to SLB·, or client source NAT·
第22题:
Router mode
One-arm mode
Three-arm mode
Bridge mode inline
第23题:
This out-of-band approach supports scaling
SLB is not inline.
Mode is not as common as bridge or routed mode.
Return traffic requires PBR, server default gateway pointing to SLB, or client source NAT.
第24题:
AES
Cisco IPS
Cisco Network Assistant
Cisco VAM2+