水压力(hydraulic pressure)
第1题:
The closing of the exhaust valves used on a modern, large, low-speed, main propulsion diesel engine may be directly provided by_______.
A.large conical springs
B.compressed air pressure
C.hydraulic pressure
D.exhaust gas pressure
第2题:
Hydraulic machinery failures are commonly caused by contamination of the hydraulic fluid and ______.
A.fluid friction
B.fluid turbulence
C.component misalignment
D.pressure surges
第3题:
A certificated lifeboatman assigned to command the lifeboat must ______.
A.be the first individual to board the craft
B.drain the hydraulic pressure before lowering the craft
C.have a list of the persons assigned to the liftboat
D.all of the above
第4题:
stop valves
check valves
safety valves
reducing valves
第5题:
Overflow valve
Reducing valve
Balancing valve
Reducing valve or balancing valve
第6题:
regulating the ratio between torque and speed via the torque limiter at the motor
directing the motor output flow through a bypass line
maintaining a constant flow and pressure input
controlling the input flow rate
第7题:
act as a shock absorber
maintain the stored oil under pressure
act as a base or foundation for the power unit
eliminate pressure surges in the system
第8题:
The relief valves in the system should be readjusted
The filters and strainers should be checked frequently
All system pressure should be readjusted
The system should be drained and renewed with a fluid of different operating characteristics
第9题:
only by the pump as its primary function
by resistance to the fluid flow through the system
by the thermal input to the systems fluid
solely by the charge applied by the accumulators
第10题:
reservoir
hand pump
accelerator
accumulator
第11题:
cause loss of hydraulic oil from the system
result in extreme damage to the pump
cause damage to the pump ff not continually drained from the pump casing
result in the system high side pressure to substantially drop off
第12题:
Pressure-reducing valve
Unloading valve
Counterbalance valve
Pressure-relief valve
第13题:
What type of valve is used to direct the flow of hydraulic fluid?
A.relief valve
B.direction control valve
C.stop valve
D.pressure control valve
第14题:
Pressure drop in an operating hydraulic system is developed ______.
A.only by the pump as its primary function
B.by resistance to the fluid flow through the system
C.by the thermal input to the system's fluid
D.solely(单独地) by the charge applied by the accumulators
第15题:
静压力(static pressure)
第16题:
supplying high pressure oil into a hydraulic motor
supplying high temperature air into the cylinder
supplying high pressure air into the cylinder
electrical igniting
第17题:
the steering pumps overspeeding
a jammed open relief vale
a constantly occurring improper rudder response
excessive ram pressure
第18题:
function when the rudder is amidships
relieve excess whip pressure from the hydraulic oil system
protect the piping assembly from external rudder shock
relieve excessive telemotor pressure
第19题:
excessive internal leakage in the pump
low discharge pressure and fluid flow
excessive fluid level in the hydraulic reservoir
operation of the pump at 100% efficiency
第20题:
tend to twist about its long axis
expand in length and in diameter
contract in length and expand in diameter
flex at right angles to the applied pressure
第21题:
the four-way control valve failing to shift
the bleeder valve sticking in the open position
cold hydraulic fluid
a clogged air vent falter on the oil reservoir
第22题:
Constant pressure system
Variable pressure system
Variable displacement system
Constant volume system
第23题:
hydraulic fluid contamination
excessive fluid friction
turbulent fluid flow
fluid pressure surges