Which condition must be met to allow a PE router to forward VPN traffic across a LSP in a Layer 3 VPN environment?()
第1题:
During BGP configuration on a router that has peered with other BGP speakers, the BGP command aggregate-a ddress 172.32.0.0 255.255.252.0 is issued. However, the peers do not receive this aggregate network in BGP advertisements. Also, the router does not have this aggregate network in its BGP table.Which option indicates a possible reason this command did not cause the router to advertise the aggregate network to its peers?()
A. Interface NULL 0 is likely shutdown.
B. The next hop IP address must be a loopback address.
C. The BGP command no auto - summary is missing.
D. The BGP command no synchronization is missing.
E. Subnets of 172.32.0.0/22 do not exist in the BGP table.
F. The IGP running on this router does not have network 172.32.0.0/22 installed.
第2题:
When BGP is used as the PE-CE routing protocol, which of these statements is correct?()
第3题:
Which three pre-conditions must be met before an OSPF router can perform graceful restart?()
第4题:
PE1 has connections to VPN sites that are served by three remote PE routers. How many LSPs must be established to support 2547bis?()
第5题:
Which two restrictions must the Enterprise Campus network designer consider when evaluatingWAN connectivity options? ()
第6题:
Which three are true about servlet filters?()
第7题:
Two Label-Switched Paths called LSP A and LSP B have been configured on a router. LSP A has been configured with a hold-priority of 3. There is insufficient reservable bandwidth along the path to accomodate both LSPs reservation requirements. Which setup priority must LSP B have to pre-empt LSP A and use its bandwidth?()
第8题:
Which three pre-conditions must be met before an OSPF router can perform graceful restart? ()
第9题:
Router must be an ABR.
Router must contain one sham link.
The network topology must be stable.
Router must be able to forward packets.
Neighbors must support graceful restart.
第10题:
On the CE router, PE neighbors must be configured in the VRF context on the CE router
On PE routers, the CE IBGP neighbors are configured in the global BGP configuration
On PE routers, the CE EBGP neighbors are configured in the VRF context
A separate BGP process must be used on the PE routers for CE routers so that they do not use the same BGP routing process as that used for the PE router's other provider neighbors
第11题:
The BGP next hop must be in inet.1.
The BGP next hop must be in inet.3.
Must have a bidirectional LSP configured.
Must have a static route to allow an RP for connected interfaces.
第12题:
Only the heartbeat IP network can exist in a VPN style network.
HACMp must have separate VPN’s for all ’non-service’ and ’service’ adapter networks.
If a VPN is used for IP traffic the heartbeating must be done over disk connections.
HACMP can exist in a VPN network environment,but special considerations must be addressed.
第13题:
Company.com has decided to implement VPN for all network traffic. How might this might affect HACMP?()
第14题:
When configuring the Cisco VPN Client,what action is required prior to installing Mutual Group Authentication?()
第15题:
PE1 has connections to VPN sites that are served by three remote PE routers. How many LSP’s must be established to support 2547bis?()
第16题:
Which the three are true about servlet filters?()
第17题:
What is a limitation of implementing uRPF?()
第18题:
Which two statements are true about static routes in the Junos OS?()
第19题:
Which pre-conditions must be met before an OSPF router can perform graceful restart?()
第20题:
Router must be ABR
Router must contain one sham link.
The network topology must be stable.
Router must be able to forward packets.
Neighbors must support graceful restart.
第21题:
Router must be ABR
Router must contain one sham link.
The network topology must be stable.
Router must be able to forward packets.
Neighbors must support graceful restart.
第22题:
an LSP for each local CE device
an LSP for each remote PE device
an LSP for each remote CE device
an LSP for each CE facing interface
第23题:
OSPF over multicast EMS or VPLS network may not have consistent broadcast or multicastperformance
IP multicast is not supported over Lover 3 MPLS VPN; instead a Layer 2 MPLS WN must beutilized with service provider support
QoS requirements with MPLS-VPN must be implemented by the service provider
Hierarchical VPLS designs are the least scalable
IGMP snooping is not on option with VPLS or EMS; instead administrative scoping or allowingsufficient bandwidth for unnecessary multicast traffic at the edge links is required