A Windows server’s backup jobs keep failing with an error message stating that the source drive is not available. After reviewing the logs， which of the following should a technician do FIRST to troubleshoot this issue？（）A、Verify the backup media has enou
题目
A Windows server’s backup jobs keep failing with an error message stating that the source drive is not available. After reviewing the logs， which of the following should a technician do FIRST to troubleshoot this issue？（）
- A、Verify the backup media has enough storage space for the backup job
- B、Verify the volume shadow copy service is running
- C、Close all terminal services sessions on the server
- D、Reboot the Windows server and re-run the backup job
相似考题
更多“A Windows server’s backup jobs keep failing with an error message stating that the source drive is not available. After reviewing the logs， which of the following should a technician do FIRST to troubleshoot this issue？（）A、Verify the backup media has enou”相关问题
-
第1题：
After installing a new hard drive into a server for the purpose of mirroring the data from the first drive to the second one， the server displays an “operating system not found” error. Which of the following should the technician do to boot the server from the original drive？（）
- A、Replace the second drive with a hot swappable one.
- B、Swap the drive boot order in the BIOS
- C、Make the second disk active under the disk management tool.
- D、Rebuild the array using the hardware RAID tool at boot.
正确答案:B -
第2题：
A VPN connection is not working correctly and the technician is unable to ping the VPN server. Which of the following actions should the technician do FIRST?（）
- A、Call their local ISP
- B、Verify the IP information of the server
- C、Check their local Internet connection
- D、Verify the hostname of the server
正确答案:C -
第3题：
You manage a server that runs Windows Server 2008. The windows backup and restore utility is installed ont he server. You nede to create a full backup of all system state data to the DVD drive （R： drive） on the server. Which command should you run on the server（）？
- A、WBadmin enable backup -addtarget：R： /quiet
- B、Wbadmin enable backup Caddtarget：C:// /quiet
- C、Wbadmin start backup CallCritical Cbackuptarget：C:// /quiet
- D、Wbadmin start backup CallCritical Cbackuptarget：R：/ quiet
正确答案:D -
第4题：
During a routine maintenance visit to a client， an administrator noticed that the last full backup did not complete. Which of the following should the administrator do FIRST？（）
- A、Schedule and perform an incremental backup as soon as possible.
- B、Inspect backup report logs.
- C、Schedule and perform a full backup as soon as possible.
- D、Inspect alert notification settings.
正确答案:B -
第5题：
A technician purchases a new 120 GB IDE hard disk to use in an old server as a swap drive. After adding the drive to the server， the technician discovers that the operating system does not detect the drive. After rebooting the server， the technician notices the drive is missing from POST and comes to the conclusion that the BIOS needs to be updated. The technician downloads the latest version of the BIOS update from the manufacturer website. Which action should the technician take next？（）
- A、 backup the BIOS configuration to use later
- B、 install the BIOS update from a command prompt
- C、 create a bootable floppy and copy the BIOS update tools to the floppy
- D、 read the manufacturer’s guidelines and recommendations on installing the update
正确答案:D -
第6题：
After receiving a message at startup stating that ‘One or more services failed to load at startup’,which of the following Windows utilities would a technician use to diagnose the issue?（）
- A、Event Viewer
- B、System Information
- C、Scandisk
- D、Dr. Watson
正确答案:A -
第7题：
A blade server has been configured to boot from SAN. After an HBA firmware upgrade the blade was rebooted and cannot find the operating system. Which of the following should the administrator do NEXT to troubleshoot the issue？（）
- A、Verify all HBA settings.
- B、Upgrade the blade firmware.
- C、Upgrade the OS level HBA drivers.
- D、Set the system to boot from the local disk.
正确答案:A -
第8题：
you manage a server that runs windows server 2008. The windows backup and restore utility is installed on the server. You need to create a full backup of all system state data to the DVD drive (R: drive) on the server. Which command should you run on the server?（）
- A、WBadmin enable backup –addtarget:R: /quiet.
- B、Wbadmin enable backup –addtarget:C: /quiet.
- C、Wbadmin start backup –allCritical –backuptarget:C: /quiet.
- D、Wbadmin start backup –allCritical –backuptarget:R:/ quiet.
正确答案:D -
第9题：
A user’s document will not print, and as a result sends the same print job several times to the printer. A technician notices that the print queue is still waiting for the first job to finish before printing successive jobs. Which of the following would BEST resolve this issue?（）
- A、Restart the print spooler service
- B、Delete the files in C:/Windows/Spool32
- C、Delete all print jobs after the first one
- D、Print a Windows test page
正确答案:A -
第10题：
单选题A server has a single failed hard drive in an array that is accessed through a hot plug backplane to ease replacement of failed drives. After replacing the drive several times， each of the replacement drives failed to power up and rebuild as the failed drive. Which of the following is the MOST likely cause of the failures？（）AThe backplane has failed and needs to be replaced.
BThe array must be disbanded and recreated from a backup source to recognize the replacement drive.
CThere is a conflict with the optical drive on the server.
DThe server power supply is failing and not providing enough power for all the drives.
正确答案： C解析： 暂无解析 -
第11题：
单选题A Windows server’s backup jobs keep failing with an error message stating that the source drive is not available. After reviewing the logs， which of the following should a technician do FIRST to troubleshoot this issue？（）AVerify the backup media has enough storage space for the backup job
BVerify the volume shadow copy service is running
CClose all terminal services sessions on the server
DReboot the Windows server and re-run the backup job
正确答案： B解析： 暂无解析 -
第12题：
单选题While reviewing the backup logs a server administrator notices that a backup job for an application server on the same subnet has failed. Which of the following is MOST likely the problem？（）AThe remote agent was not running.
BThe management card has failed.
CThe proxy server was blocking access.
DThe hardware firewall was blocking access.
正确答案： B解析： 暂无解析 -
第13题：
A technician is attempting to configure Windows XP Media Center on a desktop from a CD. The message that comes up on the screen says ‘Missing NTLDR press any key to reboot’. Which of the following should the technician do NEXT?（）
- A、Replace the video card with a compatible one.
- B、Check the Windows XP Hardware Compatibility List.
- C、Verify the boot order in the BIOS.
- D、Install Windows XP RC2 first, then upgrade to Windows XP Media Center.
正确答案:C -
第14题：
Which of the following must be done to properly conduct testing of the data backup portion of a disaster recovery plan？（）
- A、 Perform an integrity test of backup media.
- B、 Verify data on backup media can be read.
- C、 Verify that backups have occurred and were successful via the logs.
- D、 Restore backed up data to a test server.
正确答案:D -
第15题：
A server has a single failed hard drive in an array that is accessed through a hot plug backplane to ease replacement of failed drives. After replacing the drive several times， each of the replacement drives failed to power up and rebuild as the failed drive. Which of the following is the MOST likely cause of the failures？（）
- A、 The backplane has failed and needs to be replaced.
- B、 The array must be disbanded and recreated from a backup source to recognize the replacement drive.
- C、 There is a conflict with the optical drive on the server.
- D、 The server power supply is failing and not providing enough power for all the drives.
正确答案:A -
第16题：
A server has failed after a tested and scheduled change control has been implemented. Which of the following is the FIRST thing the server technician should do？（）
- A、Perform a root cause analysis.
- B、Escalate the problem.
- C、Notify stakeholders.
- D、Establish a plan of action.
正确答案:C -
第17题：
While reviewing the backup logs a server administrator notices that a backup job for an application server on the same subnet has failed. Which of the following is MOST likely the problem？（）
- A、The remote agent was not running.
- B、The management card has failed.
- C、The proxy server was blocking access.
- D、The hardware firewall was blocking access.
正确答案:A -
第18题：
A user reports that their hard drive has failed and needs to be replaced. Which of the following should the technician do FIRST?（）
- A、Run the hard disk manufacturer’s diagnostic program
- B、Re-image the drive
- C、Replace the hard drive and load Windows
- D、Ask the user diagnostic questions
正确答案:D -
第19题：
You manage a server that runs Windows Server 2008. The Windows Backup and Restore utility is installed on the server.You need to create a full backup of all system state data to the DVD drive （R： drive） on the server.Which command should you run on the server？（）
- A、Wbadmin enable backup -addtarget：R： /quiet
- B、Wbadmin enable backup addtarget：C:// /quiet
- C、Wbadmin start backup allCritical backuptarget：C:///quiet
- D、Wbadmin start backup allCritical backuptarget：R：/quiet
正确答案:D -
第20题：
You are the network administrator for your company. Your network consists of a single Active Directory domain named All network servers run Windows Server 2003. You successfully install a new server named Server9. Immediately afterward, you perform the first backup of the server. The date is January 25, 2003. Next, you add a user named Anna to the local Backup Operators group. You direct Anne to perform nightly backups of Server9. One week later, you try to review the backup logs for Server9. The Backup utility displays the information show in the exhibit Exhibit: Backup Reports Report date, time and backup job name: 1/25/2003 4:12 PM - Interactive You verify that Anne is performing nightly backups. You need to be able to review the backup logs for the previous week. What should you do?（）
- A、Add your user account to the local Backup Operators group.
- B、Direct Anne to use her user account to log on and open the Backup utility.
- C、In the Backup utility, select the verify data after the backup completes check box.
- D、Open %windir%/System32/LogFiles. Create a new subfolder named BackupLogs.
正确答案:B -
第21题：
单选题Which of the following must be done to properly conduct testing of the data backup portion of a disaster recovery plan？（）APerform an integrity test of backup media.
BVerify data on backup media can be read.
CVerify that backups have occurred and were successful via the logs.
DRestore backed up data to a test server.
正确答案： B解析： 暂无解析 -
第22题：
单选题You are the network administrator for The network consists of a single Active Directory domain All network servers run Windows Server 2003. One member server hosts a folder named F:/TestKingData. Thousands of users constantly request and updates files in F:/TestKingData. You use the Backup utility to perform an incremental backup of F:/TestKingData on magnetic tape. The backup completes normally, but you see an error indicator illuminated on the tape server. You need to verify that you can restore F:/TestKingData from the backup tape. The verification process must not affect existing files. What should you do?（）AIn the Backup utility, use the Restore and Manage Media tab to select the original tape media. Ensure that files will be restored to their original location. Start the restoration and verify that all files are restored successfully.
BIn the Backup utility, use the Restore and Manage Media tab to select the original tape media. Ensure that files will be restored to a new location. Start the restoration and verify that all files are restored successfully.
CIn the Backup utility, select the Verify data after the backup completes option. Use the original backup tape to perform another incremental backup. Ensure that all files are verifies successfully.
DIn the Backup utility, select the Verify data after the backup completes option. Use a new backup tape to perform another incremental backup. When the verification phase of the backup begins, replace the new tape with the original tape. Ensure that all files are verified successfully.
正确答案： B解析： 暂无解析 -
第23题：
单选题A technician purchases a new 120 GB IDE hard disk to use in an old server as a swap drive. After adding the drive to the server， the technician discovers that the operating system does not detect the drive. After rebooting the server， the technician notices the drive is missing from POST and comes to the conclusion that the BIOS needs to be updated. The technician downloads the latest version of the BIOS update from the manufacturer website. Which action should the technician take next？（）Abackup the BIOS configuration to use later
Binstall the BIOS update from a command prompt
Ccreate a bootable floppy and copy the BIOS update tools to the floppy
Dread the manufacturer’s guidelines and recommendations on installing the update
正确答案： D解析： 暂无解析