Which of the following should be kept in uninterruptible power supply (UPS) documentation records?()
第1题:
A. There is a fire hazard potential if a power outage occurs.
B. The last system plugged into the UPS will not be provided any power.
C. The UPS will draw more power from the circuit to compensate.
D. The runtime of the UPS will be insufficient if a power outage occurs.
第2题:
A network technician is concerned about the environmental effects of power consumption and heat from network resources Limited space is also a concern. Which of the following technologies should be implemented?()
第3题:
An administrator is working on a rack mount server with all newly installed equipment. Theuninterruptible power supply (UPS) in the rack starts beeping loudly. Which of the following is the FIRST troubleshooting step that should be taken?()
第4题:
Which of the following is MOST useful in HVAC planning? ()
第5题:
A technician has found that the uninterruptible power supply (UPS) connected to a server does not have sufficient battery power to allow the server to shutdown gracefully. Which of the following is the MOST cost effective way to allow this server to shutdown gracefully?()
第6题:
An administrator has a malfunctioning uninterruptible power supply (UPS). Which of the following is the MOST likely cause of the problem?()
第7题:
Which of the following is the MOST important physical consideration when deploying a new server?()
第8题:
Which of the following is the MOST important physical consideration when deploying a new server?()
第9题:
Battery needs to be replaced
Light switch is turned off
Smart cable is disconnected
UPS needs a firmware update
第10题:
Antivirus software version
Battery replacement date
Wire shelving diagram
IP address for network printer
Shutdown delay timing
第11题:
There is a fire hazard potential if a power outage occurs.
The last system plugged into the UPS will not be provided any power.
The UPS will draw more power from the circuit to compensate.
The runtime of the UPS will be insufficient if a power outage occurs.
第12题:
Battery needs to be replaced
Light switch is turned off
Smart cable is disconnected
UPS needs a firmware update
第13题:
A. Battery needs to be replaced
B. Light switch is turned off
C. Smart cable is disconnected
D. UPS needs a firmware update
第14题:
The user turns on the computer and hears a popping sound and detects a burning smell. Thesystem will not power on. Which of the following is the MOST likely problem?()
第15题:
A user reports that their UPS is making a loud beeping sound. Which of the following would cause this problem?()
第16题:
Which of the following modes conserves the most battery power while allowing retrieval of the computing session at a later time?()
第17题:
An administrator will replace five current servers. Which of the following is the MOST important to review before installing new servers?()
第18题:
Which of the following factors is the MOST important to consider when choosing an uninterruptible power supply (UPS) for a single server? ()
第19题:
There is a power outage and all servers are shut down properly by the uninterruptible power supply(UPS) software. When one of the servers starts up it displays a logical drive failed error. This server has two processors,16GB of memory, and a RAID 5 array with 10 drives. Which of the following is the MOST likely cause?()
第20题:
Which of the following can occur if the maximum rated load is exceeded on an uninterruptible power supply (UPS)?()
第21题:
Humidity monitors, Biometrics, and fire suppression
Cooling, rack space, and power requirements冷
Service level agreements, uninterruptible power supply (UPS) deployment, and CCTV
Biometrics, fire suppression, and power requirements
第22题:
UPS form factor
Server form factor
Server power supplys wattage rating
Desired runtime
第23题:
The UPS is overcharged.
Incorrect wattage on the power supply.
The UPS battery is not charged.
The UPS is in power management mode.