An administrator installs a new network card in a properly functioning DC. During the Windows bootup process the DC bluescreens. Which of the following is the NEXT step？（）A、 Press F8 and boot to Directory Services Restore Mode.B、 Press F8 and boot to Last

第1题：

A technician is installing Windows XP on a system that has a SATA HDD. Which of the following will the technician MOST likely have to do to start the installation? （）

• A、Press the F8 Key
• B、Press the F3 Key
• C、Press the F2 Key
• D、Press the F6 Key

第2题：

A technician is attempting to configure Windows XP Media Center on a desktop from a CD. The message that comes up on the screen says ‘Missing NTLDR press any key to reboot’. Which of the following should the technician do NEXT?（）

• A、Replace the video card with a compatible one.
• B、Check the Windows XP Hardware Compatibility List.
• C、Verify the boot order in the BIOS.
• D、Install Windows XP RC2 first, then upgrade to Windows XP Media Center.

第3题：

After installing a new video card, the computer loads Windows and continuously reboots. Which of the following would be the FIRST step that a technician should take?（）

• A、Run CHKDSK
• B、Boot to ERD
• C、Run MSCONFIG
• D、Go into Safe Mode

第4题：

Which of the following key sequences will allow a technician to install third party drivers during a Windows installation？ （）

• A、 Press F6
• B、 Press ESC
• C、 Press any key
• D、 Press Alt+F8

第5题：

Which of the following could cause an Inaccessible boot drive error during the boot process? （）

• A、HDD failure
• B、DVI failure
• C、USB failure
• D、CD failure

第6题：

An administrator installs a new network card in a properly functioning DC. During the Windows boot up process the DC bluescreens. Which of the following is the NEXT step?（）

• A、Press F8 and boot to Directory Services Restore Mode.
• B、Press F8 and boot to Last Known Good Configuration.
• C、Reboot the server again.
• D、Press F8 and boot to Safe Mode.

第7题：

During system boot， the boot process hangs at LED 0551.  Which of the following is a likely cause（）

• A、A network problem
• B、corrupted filesystem
• C、corrupted ODM
• D、corrupted /etc/inittab file

第8题：

During a password recovery, what is the next step after configuring the system to boot into single-user mode?（）

• A、Reset the root password
• B、Press the space bar
• C、Type recovery
• D、Press the "Enter" key

第9题：

第10题：

第11题：

第12题：

第13题：

A technician is dispatched to a system that will not go beyond the Windows XP splash screen.Which of the following, after restart, would allow the technician to load Windows XP?（）

• A、Press F6, select Last Known Good Configuration, login
• B、Press F8, select Debug mode, login
• C、Press F8, select Last Known Good Configuration, login
• D、Press F6, select Debug mode, login

第14题：

An administrator installs a driver,reboots the DC, and logs in to configure the NIC. Once the administrator opens the NIC properties, the server bluescreens and now will no longer boot into Windows. Which of the following is the FIRST thing the administrator should do?（）

• A、Boot into Last Known Good Configuration
• B、Reseat the NIC
• C、Boot into Safe Mode
• D、Boot into Directory Services Restore Mode

第15题：

A graphics card has been added to the system. After rebooting, the system hangs during the login process with a blue screen indicating "CDE please wait". Which of the following procedures should be performed next?（）

• A、Reinstall the CDE software
• B、Check the name resolution
• C、Uncomment the last line in .dtprofile
• D、Boot in maintenance mode and perform fsck on file systems

第16题：

A user reports that every time they start up their computer it stops with a bluescreen error. Whichof the following methods will give an alternate method of trying to start up a Windows computer?（）

• A、Press the F4 key during start up.
• B、Hold down the left Shift key during start up.
• C、Press the F2 key during start up.
• D、Press the F8 key during start up.

第17题：

After applying a new driver to a NIC, the server reboots and fails to restart. Which of the following is the BEST way to resolve the problem?（）

• A、Boot using recovery console and restore the previous driver.
• B、Boot the server, press F8 and access last known good configuration.
• C、Restore the server using last backup tape.
• D、Boot the server with ASR option.

第18题：

A technician installs a SATA controller card and moves the hard drive cable from the system board to the SATA controller. The system POSTs and the controller BIOS recognizes the hard drive but does not boot to the hard drive and start Windows. Which of the following is the MOST likely cause of the problem？（）

• A、Windows cannot be booted from a controller card.
• B、The hard drive must have Windows reinstalled because a new controller card was installed.
• C、The SATA controller card was not set as a boot device in the computer BIOS.
• D、The new controller must have the correct jumper settings for Windows mode.

第19题：

During a password recovery, what is the next step after configuring the system to boot into single-user mode?（）

• A、Reset the root password.
• B、Press the space bar.
• C、Type recovery.
• D、Press the "Enter" key.

第20题：

Your company has a domain controller that runs Windows Server 2008. The domain controller has the backup features installed. You need to perform a non-authoritative restore of the doman controller using an existing backup file. What should you do（）

• A、Boot into Directory Services Restore Mode and use wbadmin to restore critical volume.
• B、Boot into Directory Services Restore Mode and use the backup snap-in to restore critical volume
• C、Boot into Safe Mode and use wbadmin to restore critical volume
• D、Boot into Safe Mode and use the backup snap-in to restore critical volume

第21题：

第22题：

第23题：