A Windows 2003 Server is no longer able to access its internal SCSI drive. The cables are connected, the drive has power, and the drive shows up in Device Manager; however, the My Computer window does not show the drive that was previously working and fo

第1题：

You plan to install Windows 7 on a computer that contains a single hard disk drive. The hard disk drive isconnected to a RAID controller. During the installation, you discover that the Windows 7 installation mediadoes not include the files required to install the RAID controller. You need ensure that you can installWindows 7 on the hard disk drive.  What should you do?（）

• A、Insert the Windows installation media and press F8 during the computer s power-on self test (POST).
• B、Insert the Windows installation media and press F6 during the computer s power-on self test (POST).
• C、Start the computer from the Windows installation media. From the Install Windows dialog box, click Load Driver.
• D、Start the computer from the Windows installation media. From the Install Windows dialog box, click Drive options (advanced).

第2题：

An internal user has deleted a file named， pagefile.sys and is concerned this deletion may affect the computer. The user should be instructed to：（）

• A、reboot the computer because Windows automatically generates a new page file.
• B、add a new hard drive， format the drive and install Windows.
• C、back up all data， reboot the computer and notify a desktop technician.
• D、reformat the hard drive and reinstall Windows.

第3题：

A technician is working on a new computer running Windows XP and the hard drive is formatted at 20GB but is an 80GB hard drive. There is not another partition and no extra space can be foundunder Windows explorer.  Which of the following would be the BEST way to partition the remainder of the hard drive without data loss？ （）

• A、Add another hard drive and use that available space.
• B、Run FDISK.
• C、Use the Disk Management tool.
• D、Back up all important data to an external drive then reformat the hard drive.

第4题：

A technician has installed a secondary hard drive for a computer. However, the hard drive is not appearing under My Computer. The disk is receiving power, and appeared on the POST when Windows started. Which of the following Windows utilities would help configure the new hard disk?（）

• A、Disk Management
• B、Services and Applications
• C、Removable Storage
• D、Device Manager

第5题：

An administrator has added a new hard drive to a server that is running out of space on its C Drive and is experiencing slow performance.  The administrator needs to free up space on the C Drive.Which of the following is the BEST action for the administrator to take to free up space on the drive？（）

• A、Move the page file to the new drive.
• B、Copy the system32 directory to the new drive.
• C、Convert the C drive to a basic disk.
• D、Setup a software RAID to mirror the C drive.

第6题：

A user has recently added a second IDE CD-RW drive to a machine in addition to the primary DVD-ROM drive. The drive opens and closes; however, they do not see it show up in Windows. Which of the following is the MOST likely cause?（）

• A、The drive jumper settings are incorrect.
• B、The drive is not receiving power from PSU.
• C、Windows only supports one optical drive.
• D、The user connected the drive with a SATA cable.

第7题：

A defective CD-ROM drive is replaced with a new CD-ROM drive. The new CD-ROM drive is able to read any CD that it accesses， but music CDs do not play music. What is the MOST likely cause of this problem？（）

• A、The audio cable is not connected to the drive.
• B、The ribbon cable is not connected.
• C、The power cable is not connected.
• D、The CD-ROM drivers are not installed.

第8题：

You have a USB drive. You connect the drive to a computer that runs Windows XP Professional Service Pack 2 (SP2). You discover that after 15 minutes, the USB drive fails to appear in My Computer. You need to ensure that the USB drive appears in My Computer. What should you do?（）

• A、At the command prompt, run defrag.exe -f.
• B、At the command prompt, run chkdsk.exe /f. 
• C、From Disk Management, assign a drive letter to the USB drive. 
• D、Delete the usbui.dll file from the computer, and then restart the computer.

第9题：

第10题：

第11题：

第12题：

第13题：

A server has a single failed hard drive in an array that is accessed through a hot plug backplane to ease replacement of failed drives. After replacing the drive several times， each of the replacement drives failed to power up and rebuild as the failed drive.  Which of the following is the MOST likely cause of the failures？（）

• A、 The backplane has failed and needs to be replaced.
• B、 The array must be disbanded and recreated from a backup source to recognize the replacement drive.
• C、 There is a conflict with the optical drive on the server.
• D、 The server power supply is failing and not providing enough power for all the drives.

第14题：

A server has had a drive fail in its storage RAID set.  The administrator swaps the drive with a replacement and the RAID set does not automatically start to rebuild the replaced drive.  Which ofthe following utilities would MOST likely be used to initialize the rebuilding of the replace mentdrive？（）

• A、Net use
• B、Array management
• C、Fdisk
• D、Disk Management Plug-in

第15题：

A Windows 2003 Server is no longer able to access its internal SCSI drive. The cables areconnected， the drive has power， and the drive shows up in Device Manager； however， the My Computerwindow does not show the drive that was previously working and formatted with NTFS.  Which of the following would be the FIRST step in regaining access to the drive？ （）

• A、 Reformat the NTFS partition.
• B、 Recreate the partition that was deleted.
• C、 Rewrite the MBR.
• D、 Run a check disk on the drive.

第16题：

An administrator is up grading the back up server from a single tape drive to a SCSI tape library. The library has been unpackaged， mounted， and the library drivers installed.  Which of the following items should the administrator have to connect the device to the backup server？（）

• A、 SCSI cable
• B、 SCSI interface adapter on the tape library
• C、 SCSI termination card on the server
• D、 iSCSI cable

第17题：

A floppy drive is replaced in a computer and now when the computer is turned on the floppy drive light is constantly lit. Which of the following is the MOST likely cause?（）

• A、The power supply has failed.
• B、The drive cable is connected backwards.
• C、The floppy drive has failed.
• D、The proper drivers have not been loaded.

第18题：

The technician is working on a system and has determined that the hard drive must be reimaged. However, the customer wants to retain all the data. Which of the following would take the LEAST amount of time to implement?（）

• A、Create a new partition on the hard drive, copy all data to the new partition, reimage the drive, and the old data will be on the new partition and accessible.
• B、Install a new hard drive, slave the old drive, image the new drive, and show the customer how to access their data on the old drive.
• C、Upload the data to an external FTP server, reimage the drive, and then restore the data to the newly imaged drive.
• D、Copy data to a USB connected hard drive, reimage the drive, and then restore the data to the newly imaged drive.

第19题：

You have a computer that runs Windows XP and a USB drive that is protected by using BitLocker To Go.You need to ensure that you can copy files from the computer to the USB drive. The solution must retain theexisting files on the USB drive.  What should you do?（）

• A、From a computer that runs Windows 7， change the file system of the USB drive.
• B、From a computer that runs Windows 7， disable BitLocker To Go for the USB drive.
• C、Log on to Windows XP as member of the Administrators group.
• D、Log on to Windows XP by using a user account that has an Encrypting File System （EFS） certificate.

第20题：

第21题：

第22题：

第23题：