A technician is trying to load a device driver directly from the manufacturer’s CD for a PCI NIC. The operating system is Windows Vista. Windows refuses to accept the driver. Which of the following is the MOST likely cause of this problem?（）A、The driver C

题目

A technician is trying to load a device driver directly from the manufacturer’s CD for a PCI NIC. The operating system is Windows Vista. Windows refuses to accept the driver. Which of the following is the MOST likely cause of this problem?（）

  • A、The driver CD is for Windows XP only.
  • B、The technician needs to initialize the NIC first within Device Manager before installing a driver.
  • C、The driver on the CD is not digitally signed.
  • D、The driver is corrupt.
相似考题

1.A technician plugs a USB device into the computer. The system tray displays a message that reports the device is installed, but may not work properly. Which of the following is the MOST likely cause of the message?（）A. The device needs a firmware updateB. The device needs an updated driver installedC. The plugged in device is too slow for the USB port speedD. The device is incompatible with the installed version of Windows

2.You attach a USB camera to your Windows 2000 Professional computer. Windows 2000 Professional detects the camera and prompts you to install the manufacturer’s device driver. You do it， and then you restart the computer. When Win2000 Professional loads， you notice that your USB keyboard does not respond. You suspect that the camera drivers are not certified for Win2000 Professional. You want to configure your computer to enable your use keyboard and to prevent uncertified drivers from being installed in the future. What should you do？ （）A、Configure Windows 2000 Professional to enable driver signing.B、Configure Windows 2000 Professional to disable driver signing.C、Start the computer by using the recovery console， restore the system state data.D、Start the computer in safe mode， replace the camera driver with a Windows 2000 Professional driver by using Device Manager.E、Start the computer in debug mode， replace the camera driver with a Windows 2000 Professional driver by using Device Manager.

3.A technician cannot access the print queue to delete a print job. Which of the following is the MOST likely cause of this issue? （）A、Print spooler has stalledB、Device driver has failureC、Incorrect form is printingD、Incompatible driver is installed

4.Which of the following actions will prevent a driver from being reinstalled automatically?()A. Run the disable command.B. Disable the device using Device Manager.C. Review manufacturer manual.D. Reboot the server, logon in Safe Mode, uninstall the driver.

更多“A technician is trying to load a device driver directly from the manufacturer’s CD for a PCI NIC. The operating system is Windows Vista. Windows refuses to accept the driver. Which of the following is the MOST likely cause of this problem?（）A、The driver C”相关问题

  • 第1题：

    After installing the Windows operating system, Device Manager shows a number of devices with a yellow question mark next to them. Which of the following is the MOST likely reason?（）

    • A、The latest service pack needs to be installed.
    • B、The created hard drive partition is not large enough.
    • C、The motherboard chipset driver needs to be installed.
    • D、The processor does not support the Windows OS.

    正确答案:C

  • 第2题：

    A technician is unable to eject a tape from a drive when pressing the eject button. Which of the following is MOST likely the cause？（）

    • A、Corrupt OS
    • B、Array is rebuilding
    • C、Driver problem
    • D、Drive failure

    正确答案:D

  • 第3题：

    A work order states that a customer used Windows updates and after rebooting the computer， the video driver was corrupted and the computer was in safe mode. Which of the following would be the BEST action to take？（）

    • A、Download and install the correct video driver from the manufacturer’s web site.
    • B、Remove the video driver and reboot the computer.
    • C、Use the Driver Roll Back feature in Device Manager.
    • D、Go back to Windows update and specify the correct video driver.

    正确答案:C

  • 第4题：

    A technician installs a SATA controller card and moves the hard drive cable from the system board to the SATA controller. The system POSTs and the controller BIOS recognizes the hard drive but does not boot to the hard drive and start Windows. Which of the following is the MOST likely cause of the problem？（）

    • A、Windows cannot be booted from a controller card.
    • B、The hard drive must have Windows reinstalled because a new controller card was installed.
    • C、The SATA controller card was not set as a boot device in the computer BIOS.
    • D、The new controller must have the correct jumper settings for Windows mode.

    正确答案:C

  • 第5题：

    You install a new AGP video adapter in your Windows 2000 Professional computer. You install the manufacturer’s device drivers provided with the adapter and reboot your computer to load these drivers. During the startup process， the monitor goes blank and your computer stops responding after that and even does not boot properly. What should you do to solve this problem？ （）

    • A、Start the computer by using Windows 2000 professional CD and then use Emergency Repair Disk. Restore the original adapter driver settings
    • B、Start the computer in the debug mode. Restore the original adapter driver settings
    • C、Start the computer in Safe mode. Rename the AGP device by using device manager
    • D、Start the computer by using the recovery console. Rename the AGP driver. 

    正确答案:A

  • 第6题：

    You are the administrator of your company's network. You attempt to install a printer driver on a Windows 2000 computer for a user named Linda. You receive the following error message: “Error 11-Cannot install printer driver.” The driver was originally downloaded from the printer manufacturer’s Web site. You have successfully used the driver in the past on their Windows 2000 Professional computers. You want to configure Linda’s computer to check for driver integrity and to allow you to install this printer driver. What should you do? （）

    • A、 Configure driver signing to display a message before installing an unsigned driver. 
    • B、 Configure driver signing to ignore File Signature Verification. Create a Local Computer Policy to enable Windows File Protection.
    • C、 Use the Add Printer Driver wizard to install the driver.  Create a Local Computer Policy to enable Windows File Protection. 
    • D、 Use the Print Troubleshooter.  Configure the computer to prevent the installation of unsigned drivers. 

    正确答案:A

  • 第7题：

    An A+ Certified Technician MUST do an install on a Windows XP system from the distribution CD. However， the system does not boot from this CD. What is the MOST likely cause of this problem？（）

    • A、The CD is defective.
    • B、The CD is not bootable.
    • C、The CD-ROM drive is defective.
    • D、The Boot Sequence is not set in the BIOS to boot first from the CD

    正确答案:D

  • 第8题：

    单选题
    A technician is trying to load a device driver directly from the manufacturer’s CD for a PCI NIC. The operating system is Windows Vista. Windows refuses to accept the driver. Which of the following is the MOST likely cause of this problem?（）
    A

    The driver CD is for Windows XP only.

    B

    The technician needs to initialize the NIC first within Device Manager before installing a driver.

    C

    The driver on the CD is not digitally signed.

    D

    The driver is corrupt.


    正确答案： B
    解析： 暂无解析

  • 第9题：

    单选题
    You have a server that runs Windows Server 2003 Service Pack 2 (SP2). You have a third-party hardware device installed. The device uses a third-party driver. The device works properly. The driver’s hardware manufacturer provides a new device driver. You update the device driver, but the device fails to work. You need to ensure that you can use the new hardware device. What should you do? （）
    A

    Connect to Windows Update and install all driver updates.

    B

    From the properties of the device, select Roll Back Driver.

    C

    From Device Manager, uninstall the device and then restart the server.

    D

    From Device Manager, disable the device and then click Scan for hardware changes.


    正确答案： C
    解析： 暂无解析

  • 第10题：

    单选题
    A technician installs a SATA controller card and moves the hard drive cable from the system board to the SATA controller. The system POSTs and the controller BIOS recognizes the hard drive but does not boot to the hard drive and start Windows. Which of the following is the MOST likely cause of the problem？（）
    A

    Windows cannot be booted from a controller card.

    B

    The hard drive must have Windows reinstalled because a new controller card was installed.

    C

    The SATA controller card was not set as a boot device in the computer BIOS.

    D

    The new controller must have the correct jumper settings for Windows mode.


    正确答案： B
    解析： 暂无解析

  • 第11题：

    单选题
    Which of the following actions will prevent a driver from being reinstalled automatically？（）
    A

     Run the disable command.

    B

     Disable the device using Device Manager.

    C

     Review manufacturer manual.

    D

     Reboot the server， logon in Safe Mode， uninstall the driver.


    正确答案： A
    解析： 暂无解析

  • 第12题：

    单选题
    You have a server that runs Windows Server 2003 Service Pack 2 (SP2). You have a third-party hardware device installed. The device uses a third-party driver. The device works properly. The driver’s hardware manufacturer provides a new device driver. You update the device driver, but the device fails to work. You need to ensure that you can use the new hardware device. What should you do? （）
    A

    Connect to Windows Update and install all driver updates.

    B

    From the properties of the device, select Roll Back Driver.

    C

    From Device Manager, uninstall the device and then restart the server.

    D

    From Device Manager, disable the device and then click Scan for hardware changes.


    正确答案： B
    解析： 暂无解析

  • 第13题：

    You have a server that runs Windows Server 2003 Service Pack 2 (SP2). You have a third-party hardware device installed. The device uses a third-party driver. The device works properly. The driver’s hardware manufacturer provides a new device driver. You update the device driver, but the device fails to work. You need to ensure that you can use the new hardware device. What should you do? （）

    • A、Connect to Windows Update and install all driver updates.
    • B、From the properties of the device, select Roll Back Driver.
    • C、From Device Manager, uninstall the device and then restart the server.
    • D、From Device Manager, disable the device and then click Scan for hardware changes.

    正确答案:B

  • 第14题：

    Which of the following actions will prevent a driver from being reinstalled automatically?（）

    • A、Run the disable command.
    • B、Disable the device using Device Manager.
    • C、Review manufacturer manual.
    • D、Reboot the server, logon in Safe Mode, uninstall the driver.

    正确答案:B

  • 第15题：

    A technician plugs a USB device into the computer. The system tray displays a message that reports the device is installed, but may not work properly. Which of the following is the MOST likely cause of the message?（）

    • A、The device needs a firmware update
    • B、The device needs an updated driver installed
    • C、The plugged in device is too slow for the USB port speed
    • D、The device is incompatible with the installed version of Windows

    正确答案:B

  • 第16题：

    You are the administrator of ExamSheet.net's network.  You attempt to install a video driver on a Windows 2000 Professional computer. You receive the following error message: "Error 11 - Cannot install video driver."  The driver was originally downloaded from the video card manufacturer's Web site. You have successfully used the driver in the past on other Windows 2000 Professional computers. You want to configure the Windows 2000 Professional computer to check for driver integrity and to allow you to install this video driver. What should you do? （）

    • A、Use the Hardware troubleshooter. Configure the computer to prevent the installation of unsigned drivers. 
    • B、Use the Add Hardware wizard to install the driver. Create a Local Computer Policy to enable     Windows File Protection
    • C、Configure driver signing to ignore File Signature Verification. Create a Local Computer Policy to     enable Windows File Protection
    • D、Configure theUnsigned driver installation behaviorpolicy setting to beWarn but allow installation

    正确答案:D

  • 第17题：

    You have a server that runs Windows Server 2003 Service Pack 2 (SP2). You have a third-party hardware device installed. The device uses a third-party driver. The device works properly. The driver’s hardware manufacturer provides a new device driver. You update the device driver, but the device fails to work. You need to ensure that you can use the new hardware device. What should you do? （）

    • A、Connect to Windows Update and install all driver updates.
    • B、From the properties of the device, select Roll Back Driver.
    • C、From Device Manager, uninstall the device and then restart the server.
    • D、From Device Manager, disable the device and then click Scan for hardware changes.

    正确答案:B

  • 第18题：

    You are the network administrator for ExamSheet.net. You administer ExamSheet's Windows 2000 network. You want to update the device driver for the network adapter in your Windows 2000 Professional computer. You log on the computer by using the local Administrator account. You use Device Manager to verify that the network adapter is installed on your computer. You select the Driver tab and Update Driver option, and install a new driver from the network adapter manufacturer. You restart the computer. After displaying the Windows 2000 Professional startup screen, your computer displays aCkernel stop error message. You want to configure your computer to start successfully.  Which two methods can you use to resolve the problem?（）

    • A、Perform an emergency repair of the system from the Windows 2000 Professional CD-ROM by     using the Emergency Repair Disk for the computer.
    • B、Restart the computer. In the Recovery Console， use the Extract utility to reinstall the loopback     driver from the Windows 2000 Professional CD-ROM.
    • C、Restart the computer by using the last know good configuration.
    • D、Restart the computer in safe mode and reinstall the original network adapter driver. 
    • E、Restart the computer and disable Plug and Play in the computer BIOS.

    正确答案:C,D

  • 第19题：

    单选题
    A technician cannot access the print queue to delete a print job. Which of the following is the MOST likely cause of this issue? （）
    A

    Print spooler has stalled

    B

    Device driver has failure

    C

    Incorrect form is printing

    D

    Incompatible driver is installed


    正确答案： A
    解析： 暂无解析

  • 第20题：

    单选题
    After installing the Windows operating system, Device Manager shows a number of devices with a yellow question mark next to them. Which of the following is the MOST likely reason?（）
    A

    The latest service pack needs to be installed.

    B

    The created hard drive partition is not large enough.

    C

    The motherboard chipset driver needs to be installed.

    D

    The processor does not support the Windows OS.


    正确答案： B
    解析： 暂无解析

  • 第21题：

    单选题
    A work order states that a customer used Windows updates and after rebooting the computer， the video driver was corrupted and the computer was in safe mode. Which of the following would be the BEST action to take？（）
    A

    Download and install the correct video driver from the manufacturer’s web site.

    B

    Remove the video driver and reboot the computer.

    C

    Use the Driver Roll Back feature in Device Manager.

    D

    Go back to Windows update and specify the correct video driver.


    正确答案： B
    解析： 暂无解析

  • 第22题：

    单选题
    Which of the following actions will prevent a driver from being reinstalled automatically?（）
    A

    Run the disable command.

    B

    Disable the device using Device Manager.

    C

    Review manufacturer manual.

    D

    Reboot the server, logon in Safe Mode, uninstall the driver.


    正确答案： D
    解析： 暂无解析

  • 第23题：

    多选题
    You attach a USB camera to your Windows 2000 Professional computer. Windows 2000 Professional detects the camera and prompts you to install the manufacturer’s device driver. You do it， and then you restart the computer. When Win2000 Professional loads， you notice that your USB keyboard does not respond. You suspect that the camera drivers are not certified for Win2000 Professional. You want to configure your computer to enable your use keyboard and to prevent uncertified drivers from being installed in the future. What should you do？ （）
    A

    Configure Windows 2000 Professional to enable driver signing.

    B

    Configure Windows 2000 Professional to disable driver signing.

    C

    Start the computer by using the recovery console， restore the system state data.

    D

    Start the computer in safe mode， replace the camera driver with a Windows 2000 Professional driver by using Device Manager.

    E

    Start the computer in debug mode， replace the camera driver with a Windows 2000 Professional driver by using Device Manager.


    正确答案： E,D
    解析： 暂无解析

相关内容