How is the Disk Defragmentation utility in Windows XP accessed？（）A、open a command prompt and type DEFRAGB、at Startup， press the <F8> key and select Defrag DiskC、right-click My Computer， Manage， Disk DefragmenterD、right-click Drive icon， Tools， Defragment 

第1题：

A technician just finished installing a new printer on an end user’s computer. Which of thefollowing will enable the technician to see the test page option for the printer?（）

• A、Right-click on the printer and select Properties
• B、Double click on the printer icon
• C、Right-click on the printer and select Set as Default
• D、Right-click on the printer and select Open

第2题：

Your home computer runs Windows 2000 Professional. You have just installed a new application and restarted the computer. During the boot process you receive the following error message： "NTLDR is missing - Press any key to restart." You do not have an emergency repair disk. You want your computer to start properly. You want to do this with the least amount of administrative effort.  What should you do？（）

• A、Reinstall the operating system.
• B、Start the computer by using the Windows 2000 Professional CD-ROM.
• C、Select Repair option and choose the option to verify system files.
• D、Start the recovery console and type Diskpart from the command prompt.
• E、Start the recovery console and enter Fixmbr from the command prompt.

第3题：

A technician has installed a secondary hard drive for a computer. However, the hard drive is not appearing under My Computer. The disk is receiving power, and appeared on the POST when Windows started. Which of the following Windows utilities would help configure the new hard disk?（）

• A、Disk Management
• B、Services and Applications
• C、Removable Storage
• D、Device Manager

第4题：

You are the desktop administrator for your company. You install Windows XP Professional on a new portable computer that will be used by one of the company's software developers. You test the computer after you complete the installation and find out that the computer functions properly. The computer contains a 6-GB hard disk and a removable 4-GB hard disk. The 6-GB hard disk is configured as drive C, and the removable hard disk is configured as drive D. You install Windows 98 on drive D and deliver the computer to the software developer. The software developer reports that the computer does not start when drive D is not connected. Instead, the computer briefly displays an operating system menu, and then it displays an error message stating that an operating system could not be found. When drive D is connected, the computer starts Windows 98. You need to configure the computer so that it starts Windows XP Professional whether or not drive D is connected. What should you do?（）

• A、Modify the computer's BIOS so that it automatically detects whether drive D is connected.
• B、Modify the computer's BIOS so that drive C is first in the computer's boot order. 
• C、Modify the Boot.ini file on the computer by changing the default= entry to the following value: multi(0)disk(0)rdisk(0)partition(1)="Microsoft Windows XP Professional" /fastdetect.
• D、Modify the Boot.ini file on the computer by changing the entry for Windows 98 to the following value: D: "Microsoft Windows 98" /fastdetect.

第5题：

Your company has a domain controller server that runs the Windows Server 2008 R2 operating  system. The server is a backup server. The server has a single 500-GB hard disk that has three  partitions for the operating system， applications， and data. You perform daily backups of the  server.     The hard disk fails. You replace the hard disk with a new hard disk of the same capacity. You  restart the computer on the installation media. You select the Repair your computer option.     You need to restore the operating system and all files.     What should you do（）

• A、Select the System Image Recovery option.
• B、Run the Imagex utility at the command prompt.
• C、Run the Wbadmin utility at the command prompt.
• D、Run the Rollback utility at the command prompt.

第6题：

Your company has a domain controller that runs Windows Server 2008. The server is a backup server. The server has a single 500-GB hard disk that has three partitions for the operating system， applications， and data. You perform daily backups of the server. The hard disk fails. You replace the hard disk with a new hard disk of the same capacity. You restart the computer on the installation media. You select the Repair your computer option. You need to restore the operating system and all files. What should you do（）

• A、Select the Startup repair option.
• B、Select the System restore option.
• C、Run the Rollback utility at the command prompt.
• D、Run the Wbadmin utility at the command prompt.

第7题：

You have a computer that runs Windows 7. You perform regular data backups and system image backups.The computer experiences a hard disk failure. You replace the failed hard disk. You need to recover thecomputer to the previous Windows 7 environment. You start the computer from the Windows 7 installationmedia. Which recover option should you select?（）

• A、Command Prompt
• B、Startup Repair
• C、System Image Recovery
• D、System Restore

第8题：

You have a computer that runs Windows XP Professional. You need to create a floppy disk to start Windows XP Professional on the computer if the start files become corrupt. What should you do?（） 

• A、From the Windows XP Professional computer, run diskcopy.exe /v a:.
• B、From a computer that runs Windows 98, create a MS-DOS-based startup disk. 
• C、From the Windows XP Professional computer, create an Automated System Recovery (ASR) disk. 
• D、From the Windows XP Professional computer, format a floppy disk. Copy the NTLDR, ntdtetect.com, and boot.ini files to the floppy disk. 

第9题：

第10题：

第11题：

第12题：

第13题：

You plan to install Windows 7 on a computer that contains a single hard disk drive. The hard disk drive isconnected to a RAID controller. During the installation, you discover that the Windows 7 installation mediadoes not include the files required to install the RAID controller. You need ensure that you can installWindows 7 on the hard disk drive.  What should you do?（）

• A、Insert the Windows installation media and press F8 during the computer s power-on self test (POST).
• B、Insert the Windows installation media and press F6 during the computer s power-on self test (POST).
• C、Start the computer from the Windows installation media. From the Install Windows dialog box, click Load Driver.
• D、Start the computer from the Windows installation media. From the Install Windows dialog box, click Drive options (advanced).

第14题：

Which of the following describes how to set the Read-only attribute on a folder？（）

• A、Right-click the folder > Properties > Security tab > select the username from the list > Permissions > clear the box labeled Read > OK
• B、Open the folder > Tool > Folder Options > General tab > Read-only > OK
• C、Open the Command Prompt > type attrib r [drive：][path] > Enter
• D、Open the Command Prompt > type attrib +r [drive：][path] > Enter
• E、Right-click the folder > Properties > General tab > Attributes > select Read-only > OK

第15题：

You have a server that runs Windows Server 2003 Service Pack 2 (SP2). You need to ensure that a defragmentation of the server’s hard disk drive runs each night. What should you do? （）

• A、Create a scheduled task that runs Dfrg.msc.
• B、Create a scheduled task that runs Defrag.exe.
• C、From Computer Management, run Disk Management.
• D、From Computer Management, run Disk Defragmenter.

第16题：

You have a computer that runs Windows XP Professional. The computer has a limited amount of free disk space. You need to identify the amount of disk space that is used to store the following：Temporary Internet Files, Files in the Recycle Bin, Downloaded program files. What should you do?（）

• A、From the command prompt， run chkdsk.exe.
• B、From the System Tools menu， run Disk Cleanup.
• C、From Internet Explorer， view the Internet Options.
• D、From System Properties， view the User Profiles settings.

第17题：

You are the desktop administrator for your company. You are responsible for automating the deployment of Windows XP Professional to new computers in your company. You are preparing a Windows XP Professional computer, which you will use to test disk imaging. You install Windows XP Professional on the test computer and run the Sysprep utility. You use a third-party software package to create a disk image. You apply the disk image to a new computer and then restart the computer. Instead of completing the Windows XP Professional installation, the computer starts the Windows Welcome program, requiring you to enter additional setup information.  Because you will be deploying a large number of computers, you want to ensure that the disk image can be applied without additional user interaction. What should you do?（） 

• A、Use a network-based RIS server to apply the disk image to new computers. 
• B、On the test computer, run the Sysprep -factory command. Re-create the disk image by using the third-party software. 
• C、Use Setup Manager to create a Sysprep answer file. Copy the answer file to a floppy disk, and insert the disk into new computers when the disk image is applied. 
• D、Create an Unattend.txt answer file. Copy the file to the C:/Winnt/System32 folder on the test computer. Run the Sysprep utility and re-create the disk image by using the third-party software.

第18题：

You install an updated device for the Zip drive on your Windows 2000 Professional computer. You restart the computer.  During the startup process, the computer stops responding.   You then restart the computer in safe mode. During the startup process, the computer stops responding again. You suspect the new device driver is causing the problem. You want to resolve the problem so that the computer starts successfully.   What should you do?（）

• A、Use the listsvc command to disable the Zip device driver.
• B、Use the disable command to disable the Zip device driver.
• C、Select Recovery Console from the Repair menu.
• D、Select debug mode from the Windows 2000 Advanced Options menu.
• E、Insert the Emergency Repair Disk.
• F、Specify the path to the recovery files on the hard disk.
• G、Start the computer by using the Windows 2000 Professional CD-ROM.

第19题：

You have a USB drive. You connect the drive to a computer that runs Windows XP Professional Service Pack 2 (SP2). You discover that after 15 minutes, the USB drive fails to appear in My Computer. You need to ensure that the USB drive appears in My Computer. What should you do?（）

• A、At the command prompt, run defrag.exe -f.
• B、At the command prompt, run chkdsk.exe /f. 
• C、From Disk Management, assign a drive letter to the USB drive. 
• D、Delete the usbui.dll file from the computer, and then restart the computer.

第20题：

You are the network administrator for TestKing.com. A Windows Server 2003 computer named TestKing6 functions as a file server. Drive C on TestKing6 is running low on free disk space. You need to ensure that an event is written to the application log on Drive C when 10 percent of the available free space on the server remains. What should you do?（）

• A、Open Event Viewer and expand the application log. Select New Log View.
• B、Open Computer Management and expand Storage. Right-click Disk Management, and then select Rescan Disks.
• C、Open Performance and expand Performance Logs and Alerts. Right-click Counter Logs, and then select New Log Settings.
• D、Open Performance and expand Performance Logs and Alerts. Right-click Alerts, and then select New Alert Settings.

第21题：

第22题：

第23题：