A new server was installed. Most clients are located in the same subnet as the server and can successfully access the server. Clients located on different subnets have been unable to access the server， but have no trouble accessing other servers on their

题目

A new server was installed. Most clients are located in the same subnet as the server and can successfully access the server. Clients located on different subnets have been unable to access the server， but have no trouble accessing other servers on their subnet.  Which of the following is the reason that these clients are unable to access the server？（）

  • A、 DHCP has assigned the wrong addresses.
  • B、 Incorrect default gateway on the server.
  • C、 DNS entries were not created.
  • D、 WINS server is not responding.
相似考题

1.You are the administrator for your company's network. The network is configured as shown in the exhibit.You want to install Windows 2000 Professional on 20 new PXE-compliant computers on the marketing segment of your network. The new computers do not have operating systems installed.You create a RIS image. You load the image onto the RIS server. You then start the new computers.You find that the new computers cannot connect to the RIS server. You verify that the new computers cannot connect to the RIS server. You verify that the existing client computers in the network can connect to the network servers, including the RIS server. You want to enable the new computers to connect to the RIS server.What should you do?A．Add a Windows 2000 Server computer running WINS to the network.B．Add a Windows 2000 Server computer running DHCP to the network.C．Add the domain Everyone group to the RIS OS image security settings.D．Place the new computers on the same segment as the RIS server.

2.You are the administrator of a 12 SQL Server 2000 computers. These servers are located in company offices throughout the world.You configure a multiserver job on the server in your company's New York City office. You configure this server as a master server, and designate the remaining 11 servers as target servers.After the job completes successfully, you decide to set up a new SQL Server 2000 computer as the master server. The new server will be named JobMaster and the other 12 servers will be target servers.You need to make the New York City server a target server instead of a master server. What should you do?A．On the New York City server, defect all 11 target servers. On the JobMaster server, enlist the 12 servers as target servers.B．On the JobMaster server, enlist all other servers as target servers.C．On the New York City server enlist the JobMaster server as a target server. Transfer the multiserver jobs from the New York City server to the JobMaster server.D．On the JobMaster server, enlist the New York City server as a target server. On the JobMaster server, enlist the other 11 servers as target servers. On the JobMaster server, defect the New York City server.

3.A technical consultant needs to deploy a Microsoft Windows 2003 server image from a single x336 to five new x336 servers using Remote Deployment Manager （RDM）.  After installing and configuring RDM and loading the installation image， the consultant wants to deploy the first server.  After the new x336 is booted， it is unable to connect to the RDM server.  Which of the following is the most likely cause of the problem？（）A、The new server is not PXE-enabled.B、The RDM agent is not configured on the RDM server.C、The IBM Director agent is not installed on the new server.D、A DHCP server is not installed or configured the network.

4.You are the administrator of two SQL Server 2000 computers. One of these servers contains a 4-GB database named marketing. You want to remove the marketing database from one server and add it to the other as quickly as possible.What should you do?A．Detach the database from the original server by using the sp_detach_db stored procedure. Copy the database and the transaction log files to the new server, and attach them by using the sp_attach_db stored procedure.B．Use the DTS export wizard to transfer all database objects from the original server to the new server. Drop the database from the original server.C．Run a full backup of the database on the original server. Create a new database named marketing on the new server. Restore the backup in the new marketing database. Drop the database from the original server.D．Shut down the original server. Copy the database and the transaction log files to the new server. Use the DISK INIT and DISK REFIT statements to attach the data file to the new server. Drop the database from the original server.

参考答案和解析
正确答案:B
更多“A new server was”相关问题

  • 第1题：

    You have two servers that run Windows Server 2008 named Server1 and Server2. You install Windows SharePoint Services （WSS） 3.0 on Server1. You install the SMTP feature on Server2. You configure the outgoing e-mail settings on Server1 to use the SMTP service on Server2. You need to ensure that e-mail messages from Server1 are forwarded to users. What should you do？（）

    • A、On Server2， create a new application pool， and then associate the application pool with a new Web site.
    • B、On Server2， configure the SMTP service to accept anonymous connections and to relay e-mail messages.
    • C、On Server1， create a new application pool. On an internal DNS server， create a new MX record for Server1.
    • D、On Server1， create a new application pool. On an internal DNS server， create a new MX record for Server2.

    正确答案:B

  • 第2题：

    You are building a test environment to evaluate DNS Security Extensions (DNSSEC). You have a domain controller named Server1 that runs Windows Server 2008 R2 in your test environment. Server1 has the DNS Server server role installed. You need to configure Server1 to support the DNSSEC evaluation. Which two actions should you perform？（）

    • A、Create a new Quad-A (AAAA) DNS record.
    • B、Create a new Signature (SIG) DNS record.
    • C、Create a new Public key (KEY) DNS record.
    • D、Create a new Well-known service (WKS) DNS record.

    正确答案:B,C

  • 第3题：

    You are the network administrator for TestKing.com. The network consists of a single Active Directory domain named testking.com. All network servers run Windows Server 2003. You place computer accounts for servers in OUs that are organized by server roles. You apply GPOs to these servers at the OU level. You need to add a new server to the domain. You need to ensure that the appropriate GPOs are applied to this server. What should you do?（）

    • A、Prestage a domain computer account for the new server in the appropriate OU. Join the server to the domain by using the prestaged computer account.
    • B、On the server, add the domain name for the Active Directory domain to the DNS suffix setting. Join the server to the domain.
    • C、Assign a user account the Allow - Create permission for the appropriate OU. Join the new server to the domain by using the user account.
    • D、Join the new server to the Active Directory domain. On the new server, run the gpupdate /force command.

    正确答案:A

  • 第4题：

    Your company has a single Active Directory domain. All domain controllers run Windows Server  2003.     You install Windows Server 2008 R2 on a server.     You need to add the new server as a domain controller in your domain.     What should you do first（）

    • A、On the new server， run dcpromo /adv.
    • B、On the new server， run dcpromo /createdcaccount.
    • C、On a domain controller run adprep /rodcprep.
    • D、On a domain controller， run adprep /forestprep.

    正确答案:D

  • 第5题：

    You have an Active Directory forest that runs Windows Server 2008.You have an Exchange Server 2010 organization that contains a Hub Transport server named Hub1.Hub1 fails.An administrator deletes the computer account and all other references of Hub1 from Active Directory.You need to replace the Hub Transport server role on a new server.You must achieve this goal by using the minimum amount of administrative effort.What should you do？（）

    • A、On the new server， run Setup /M：RecoverServer
    • B、On the new server， run the Exchange Server installation program and then select the Hub Transport role
    • C、from Ntdsutil， perform an authoritative restore and then create a managed service account named Hub1
    • D、from Ntdsutil， perform an authoritative restore and then create a CNAME record for Hub1 that points to the new server

    正确答案:B

  • 第6题：

    You have two servers that run Windows Server 2008 named Server1 and Server2. You install Windows Server Update Services （WSUS） on both servers.You need to configure WSUS on Server1 to receive updates from Server2. What should you do on Server1？（）

    • A、Configure a proxy server.
    • B、Configure an upstream server.
    • C、Create a new replica group.
    • D、Create a new computer group.

    正确答案:B

  • 第7题：

    单选题
    You are designing the placement of the global catalog servers. You want to use the minimum number of global catalog servers that are required.  Which design should you use？（）
    A

     One global catalog server in New York.

    B

     Two global catalog servers in New York.

    C

     One global catalog server in Chicago and one global catalog server in New York.

    D

     Two global catalog servers in Chicago and two global catalog servers in New York.

    E

     One global catalog server in Chicago， one global catalog server in New York， and one global catalog server in Boston.


    正确答案： B
    解析： 暂无解析

  • 第8题：

    单选题
    Your company has a DNS server named Server1. Your partner company has a DNS server named Server2. You create a stub zone on Server1. The master for the stub zone is Server2. Server2 fails. You discover that users are not able to resolve names for the partner company. You need to ensure that users are able to resolve names for the partner company in the event that Server2 fails. What should you do？（）
    A

     Change the stub zone to a secondary zone on Server1

    B

     Open the SOA record for the zone on Server2. Change the Minimum （default） TTL setting to 12 hours.

    C

     Open the DNS zone for the partner company on Server2. Create a new Route Through （RT） record and a new host （A） record for Server1.

    D

     Open the primary DNS zone on Server2. Create a new Service Locator （SRV） record and a new host（A） record for Server1.


    正确答案： A
    解析： 暂无解析

  • 第9题：

    单选题
    A technical consultant needs to deploy a Microsoft Windows 2003 server image from a single x336 to five new x336 servers using Remote Deployment Manager （RDM）.  After installing and configuring RDM and loading the installation image， the consultant wants to deploy the first server.  After the new x336 is booted， it is unable to connect to the RDM server.  Which of the following is the most likely cause of the problem？（）
    A

    The new server is not PXE-enabled.

    B

    The RDM agent is not configured on the RDM server.

    C

    The IBM Director agent is not installed on the new server.

    D

    A DHCP server is not installed or configured the network.


    正确答案： D
    解析： 暂无解析

  • 第10题：

    单选题
    Your network contains an Exchange Server 2007 Mailbox server named Server1 and an Exchange Server 2010 Mailbox server named Server2.You need to move a mailbox from Server1 to Server2.What should you do？（）
    A

    From Server1， run Move-Mailbox.

    B

    From Server2， run Move-Mailbox.

    C

    From Server1， run New-MoveRequest.

    D

    From Server2， run New-MoveRequest.


    正确答案： C
    解析： 暂无解析

  • 第11题：

    单选题
    Your company has a single Active Directory domain. All domain controllers run Windows Server 2003.    You install Windows Server 2008 R2 on a server.    You need to add the new server as a domain controller in your domain.    What should you do first（）
    A

    On the new server， run dcpromo /adv.

    B

    On the new server， run dcpromo /createdcaccount.

    C

    On a domain controller run adprep /rodcprep.

    D

    On a domain controller， run adprep /forestprep.


    正确答案： C
    解析： 暂无解析

  • 第12题：

    单选题
    You are the network administrator for your company. The network consists of a single Active Directory domain.All servers run Windows Server 2003.You place computer accounts for servers in organizational units (OUs) that are organized by server roles. You apply Group Policy objects (GPOs) to these servers at the OU level.You need to add a new server to the domain. You need to ensure that the appropriate GPOs are applied to this server.What should you do? （）
    A

    Prestage a domain computer account for the new server in the appropriate OU. Join the server to the domain by using the prestaged computer account.

    B

    On the new server, add the domain name for the Active Directory domain to the DNS suffix setting. Join the server to the domain.

    C

    Assign a user account the Allow - Create permission for the appropriate OU. Join the new server to the domain by using the user account.

    D

    Join the new server to the Active Directory domain. On the new server, run the gpupdate /force command.


    正确答案： C
    解析： 暂无解析

  • 第13题：

    You have an Exchange Server 2007 organization. You install a new Exchange Server 2010 Mailbox server.You need to move all mailboxes to the Exchange Server 2010 server. What are two possible ways to achieve this goal（）？

    • A、From the Exchange Server 2007 Exchange Management Shell， run the Move-Mailbox cmdlet.
    • B、From the Exchange Server 2010 Exchange Management Shell， run the New-MoveRequest cmdlet
    • C、From the Exchange Server 2007 Exchange Management Console （EMC）， run the Move Mailbox wizard.
    • D、From the Exchange Server 2010 Exchange Management Console （EMC）， run the New Local Move Request wizard.

    正确答案:B,D

  • 第14题：

    You have two servers that run Windows Server 2008 named Server1 and Server2. You install WSUS on both servers. You need to configure WSUS on Server1 to receive updates from Server2. What should you do on Server1？ （）

    • A、 Configure a proxy server
    • B、 Configure a upstream server
    • C、 Create a new replica group
    • D、 Create a new computer group

    正确答案:B

  • 第15题：

    You are designing the placement of the global catalog servers. You want to use the minimum number of global catalog servers that are required. Which design should you use?（）

    • A、One global catalog server in New York.
    • B、Two global catalog servers in New York.
    • C、One global catalog server in Chicago and one global catalog server in New York.
    • D、Two global catalog servers in Chicago and two global catalog servers in New York.
    • E、One global catalog server in Chicago, one global catalog server in New York, and one global catalog server in Boston.

    正确答案:E

  • 第16题：

    You have an Exchange Server 2010 organization that contains three Mailbox servers.All Mailbox servers are members of a database availability group （DAG） and have a public folder database.The Active Directory forest contains one site.You create a new site and install new Exchange Server 2010 servers in the site.You need to ensure that public folders are stored on servers in both sites.What should you do？（）

    • A、Create a public folder database on a server in the new site. Modify the replication settings for all public folders
    • B、Create a public folder database on a server in the new site.Run the Set-DatabaseAvailabilityGroup cmdlet from a server in the new site
    • C、Configure clustered continuous replication （CCR） on two servers in the new site. Modify the replication settings for all public folder databases
    • D、Configure standby continuous replication （SCR） on a server in the new site. Run the Enable-StorageGroupCopy cmdlet from a server in the new site

    正确答案:A

  • 第17题：

    Your network contains an internal network and a perimeter network.You have one Exchange Server 2010 server on the internal network. You install Windows Server 2008 R2 on a new server in the perimeter network.You need to ensure that you can install the Edge Transport server role on the new server. What should you do？（）

    • A、Join the new server to an Active Directory domain.
    • B、Install Active？ Directory Lightweight Directory Services on the new server.
    • C、Run ImportEdgeConfig.ps1 on the existing Exchange Server 2010 server.
    • D、Open TCP port 88 and TCP port 3268 on the firewall between the perimeter network and the internal network.

    正确答案:B

  • 第18题：

    Your company has a single Active Directory domain. AlI domain controllers run Windows Server 2003 You install Windows Server 2008 on a server. You need to add the new server as a domaincontroller in your domain.What should you do first（）

    • A、On the new server， run dcpromo /adv.
    • B、On the new server， run dcpromo /createdcaccount.
    • C、On a domain controller run adprep /rodcprep.
    • D、On a domain controller， run adprep /forestprep.

    正确答案:D

  • 第19题：

    单选题
    Your network contains a single Active Directory domain. All servers run Windows Server 2008 R2.   You deploy a new server that runs Windows Server 2008 R2. The server is not connected to the  internal network.     You need to ensure that the new server is already joined to the domain when it first connects to  the internal network.     What should you do（）
    A

    From a domain controller， run sysprep.exe and specify the /oobe parameter. From the new server， run sysprep.exe

    B

    From a domain controller， run sysprep.exe and specify the /generalize parameter. From the new server， run syspre

    C

    From a domain-joined computer， run djoin.exe and specify the /provision parameter. From the new server， run djoin

    D

    From a domain-joined computer， run djoin.exe and specify the /requestodj parameter. From the new server， run djo


    正确答案： B
    解析： 暂无解析

  • 第20题：

    单选题
    A customer is searching for a new， small business server. The customer is standardized on AMD and does not want to place the new server in a rack.  Which IBM server will best fit this customers requirement？ （）
    A

    x3105

    B

    x3200

    C

    x3400

    D

    x3455


    正确答案： B
    解析： 暂无解析

  • 第21题：

    单选题
    Your company has a single Active Directory domain. AlI domain controllers run Windows Server 2003 You install Windows Server 2008 on a server. You need to add the new server as a domaincontroller in your domain.What should you do first（）
    A

    On the new server， run dcpromo /adv.

    B

    On the new server， run dcpromo /createdcaccount.

    C

    On a domain controller run adprep /rodcprep.

    D

    On a domain controller， run adprep /forestprep.


    正确答案： A
    解析： 暂无解析

  • 第22题：

    单选题
    You have two servers that run Windows Server 2008 named Server1 and Server2. You install Windows SharePoint Services （WSS） 3.0 on Server1. You install the SMTP feature on Server2. You configure the outgoing e-mail settings on Server1 to use the SMTP service on Server2. You need to ensure that e-mail messages from Server1 are forwarded to users. What should you do？（）
    A

    On Server2， create a new application pool， and then associate the application pool with a new Web site.

    B

    On Server2， configure the SMTP service to accept anonymous connections and to relay e-mail messages.

    C

    On Server1， create a new application pool. On an internal DNS server， create a new MX record for Server1.

    D

    On Server1， create a new application pool. On an internal DNS server， create a new MX record for Server2.


    正确答案： B
    解析： 暂无解析

  • 第23题：

    单选题
    You have two servers that run windows server 2008 named server1 and server2. You install WSUS on both servers. You need to configure WSUS on server1 to receive updates from server2. What should you do on server1?（）
    A

    Configure a proxy server.

    B

    Configure a upstream server.

    C

    Create a new replica group.

    D

    Create a new computer group.


    正确答案： C
    解析： 暂无解析

相关内容