A client has tried to update the firmware of an Ethernet adapter on a p5 590, however it repeatedly fails. What is the most likely cause of this problem?（）A、The adapter must be taken offline prior to the firmware updateB、The adapter must be assigned to th

题目

A client has tried to update the firmware of an Ethernet adapter on a p5 590, however it repeatedly fails. What is the most likely cause of this problem?（）

  • A、The adapter must be taken offline prior to the firmware update
  • B、The adapter must be assigned to the service partition prior to the firmware update
  • C、The system has not been rebooted since the adapter was added to the Logical Partition
  • D、The adapter must be dynamically removed from the Logical Partition prior to the firmware update
相似考题

1.A "trusted" client needs to communicate with a server that has been configured to use CLIENT authentication. Which of the following will be used to verify passwords?()A.User ID/password fileB.Communications layerC.Client applicationsD.Operating system

2. A developer is designing a web application that must verify for each request： The originating request is froma trusted network. The client has a valid session.The client has been authenticated. Which design pattern provides a solution in this situation？（）A、Transfer ObjectB、Session FacadeC、Intercepting FilterD、Template MethodE、Model-View-Controller

3.A Windows Communication Foundation （WCF） service has a callback contract. You are developing a client application that will call this service. You must ensure that the client application can interact with the WCF service. What should you do？ （）A、 On the OperationContractAttribute， set the AsyncPattern property value to True.B、 On the OperationContractAttribute， set the ReplyAction property value to the endpoint address of the client. For interactive and self-paced preparation of exam 70-513， try our practice exams. Practice exams also include self assessment and reporting features!C、 On the client， create a proxy derived from DuplexClientBase（Of TChannel）.D、 On the client， use GetCallbackChannel（Of T）.

4.Which additional configuration step is necessary in order to connect to an access point that has SSID broadcasting disabled?（）A、Set the SSID value in the client software to public.B、Configure open authentication on the AP and the client.C、Set the SSID value on the client to the SSID configured on the APD、Configure MAC address filtering to permit the client to connect to the AP

参考答案和解析
正确答案:A
更多“A client has t”相关问题

  • 第1题：

    On a Cisco Aironet 802.11 a/b/g wireless LAN client adapter，the status LED and activity LED are alternating on and off. What does this indicate？（）

    • A、The client card has failed.
    • B、The client card is not associated to the network.
    • C、The driver has been installed incorrectly.
    • D、The client card has awakened from power-save mode.

    正确答案:B

  • 第2题：

    A wireless client cannot connect to an 802.11b/g BSS with a b/g wireless card. The client section of the access point does not list any active WLAN clients. What is a possible reason for this?（）

    • A、The incorrect channel is configured on the client.
    • B、The client's IP address is on the wrong subnet.
    • C、The client has an incorrect pre-shared key.
    • D、The SSID is configured incorrectly on the client.

    正确答案:D

  • 第3题：

    Under which three conditions does a client initiate roaming between wireless cells in the Company  WLAN？ （）

    • A、 The access point has broadcast too many SSIDs.
    • B、 The wireless client has missed too many beacons from the access point.
    • C、 The maximum data retry count， initiated by the wireless client， is exceeded.
    • D、 The wireless client has reduced the data rate.
    • E、 The access point has requested client reauthentication.
    • F、 The wireless client has missed too many IAPP （Inter Access Point Protocol） updates.

    正确答案:B,C,D

  • 第4题：

    A client has called with concerns that their computer problem has not been resolved by the onsite technician who has left. As the technicians supervisor， which of the following is the BEST course of action in this situation？（）

    • A、Tell the client that they will need to place another service call.
    • B、Ask the client if they would like to discuss their computer problems in more detail.
    • C、Tell the client that another technician will be sent out.
    • D、Inform the client that the problem will be resolved by the onsite technician at another time.

    正确答案:A

  • 第5题：

    A "trusted" client needs to communicate with a server that has been configured to use CLIENT authentication. Which of the following will be used to verify passwords?（）

    • A、User ID/password file
    • B、Communications layer
    • C、Client applications
    • D、Operating system

    正确答案:D

  • 第6题：

    单选题
    A client roams from H-REAP AP1 to H-REAP AP2. The client is unable to associate to H-REAPAP2. H-REAP AP2 has six other clients associated to it，which continue to pass traffic. What hascaused thisproblem？（）
    A

    H-REAP AP1 has reached its client limit.

    B

    H-REAP AP2 has reached its client limit.

    C

    H-REAP AP2 lost its connection to the controller.

    D

    H-REAP AP1 lost its connection to the controller.


    正确答案： C
    解析： 暂无解析

  • 第7题：

    单选题
    A developer is designing a web application that must verify for each request： The originating request is froma trusted network. The client has a valid session.The client has been authenticated. Which design pattern provides a solution in this situation？（）
    A

    Transfer Object

    B

    Session Facade

    C

    Intercepting Filter

    D

    Template Method

    E

    Model-View-Controller


    正确答案： E
    解析： 暂无解析

  • 第8题：

    单选题
    Refer to the exhibit. A Cisco Aironet Wireless LAN Client Adapter has been installed and configured  through the ADU on the PC. The Aironet System Tray Utility （ASTU） has been enabled during the  installation and the icon appears in the system tray area in the lower right of the desktop. What is the  significance of the icon？（）
    A

     It indicates that the radio of the client adapter is disabled.

    B

     It indicates that the client adapter is not associated to an access point or another client. 

    C

     It indicates that the client adapter is associated to an access point or another client， but the user is not  EAP authenticated.

    D

     It indicates that the client adapter is associated to an access point or another client， that the user is  authenticated if the client adapter is configured for EAP authentication， and that the signal strength is  excellent or good.

    E

     It indicates that the client adapter is associated to an access point or another client， that the user is  authenticated if the client adapter is configured for EAP authentication， and that the signal strength is fair.

    F

     It indicates that the client adapter is associated to an access point or another client， that the user is  authenticated if the client adapter is configured for EAP authentication， and that the signal strength is poor.


    正确答案： F
    解析： 暂无解析

  • 第9题：

    单选题
    A Windows Communication Foundation （WCF） service has a callback contract. You are developing a client application that will call this service. You must ensure that the client application can interact with the WCF service. What should you do？ （）
    A

     On the OperationContractAttribute， set the AsyncPattern property value to True.

    B

     On the OperationContractAttribute， set the ReplyAction property value to the endpoint address of the client. For interactive and self-paced preparation of exam 70-513， try our practice exams. Practice exams also include self assessment and reporting features!

    C

     On the client， create a proxy derived from DuplexClientBase（Of TChannel）.

    D

     On the client， use GetCallbackChannel（Of T）.


    正确答案： A
    解析： 暂无解析

  • 第10题：

    单选题
    What is the WMM user priority of the packets going downstream to the client when the client does not support TSPEC but the Cisco WLC has ACM enabled and WLAN priority is set to Platinum?（）
    A

    background

    B

    best effort

    C

    voice

    D

    video


    正确答案： B
    解析： 暂无解析

  • 第11题：

    A client roams from H-REAP AP1 to H-REAP AP2. The client is unable to associate to H-REAP AP2.H-REAP AP2 has six other clients associated to it，which continue to pass traffic. What has causedthis problem？（）

    • A、H-REAP AP1 has reached its client limit.
    • B、H-REAP AP2 has reached its client limit.
    • C、H-REAP AP2 lost its connection to the controller.
    • D、H-REAP AP1 lost its connection to the controller.

    正确答案:C

  • 第12题：

    A client roams from H-REAP AP1 to H-REAP AP2. The client is unable to associate to H-REAPAP2. H-REAP AP2 has six other clients associated to it，which continue to pass traffic. What hascaused thisproblem？（）

    • A、H-REAP AP1 has reached its client limit.
    • B、H-REAP AP2 has reached its client limit.
    • C、H-REAP AP2 lost its connection to the controller.
    • D、H-REAP AP1 lost its connection to the controller.

    正确答案:C

  • 第13题：

    Which additional configuration step is necessary in order to connect to an access point that has SSID broadcasting disabled?（）

    • A、Set the SSID value in the client software to public.
    • B、Configure open authentication on the AP and the client.
    • C、Set the SSID value on the client to the SSID configured on the AP.
    • D、Configured MAC address filtering to permit the client to connect to the AP.

    正确答案:C

  • 第14题：

    A client has a need to look at and add many image files but has no need to change them. Which of the following media types would BEST meet the client’s needs？（）

    • A、CD-RW
    • B、Disk
    • C、Flash
    • D、WORM

    正确答案:D

  • 第15题：

    An administrator is trying to diagnose as to why a new VIO client （vio_client1） cannot see an allocated disk （hdisk4） from a VIO server （VIOS-A）. The client virtual SCSI adapter has a slot ID of 5 and the corresponding VIO server virtual SCSI adapter has a slot ID of 3. The administrator checks the virtual SCSI configuration from the HMC using the following lshwres command.  lshwres –r virtualio --rsubtype scsi -m 9117-570*65ABCDE  --level lpar -F / lpar_name，slot_num，remote_lpar_name，remote_slot_num，backing_device VIOS A，5，vio_client2，2，hdisk3 VIOS-A，4，vio_client1，4，hdisk4 VIOS-A，3，vio_client1，6，hdisk5 VIOS-A，2，vio_client3，2，hdisk6 vio_client2，2，VIOS-A，5，hdisk0 vio_client1，4，VIOS-A，4，hdisk0  vio_client1，5，VIOS-A，3，null vio_client3，2，VIOS-A，2，hdisk0 From the output above，  what is the most likely reason why the client cannot see the mapped storage？（）

    • A、 The hard disk has been inccorectly mapped on the VIO server.
    • B、 The hard disk has been incorrectly addressed on the VIO client.
    • C、 The client SCSI adapter has been mapped to the incorrect server SCSI adapter.
    • D、 The server SCSI adapter has been mapped to the incorrect client server adapter.

    正确答案:D

  • 第16题：

    单选题
    Refer to the exhibit. A Cisco Aironet Wireless LAN Client Adapter has been installed and configured through the ADU on the PC. The Aironet System Tray Utility （ASTU） has been enabled during the installation and the icon appears in the system tray area in the lower right of the desktop. What is thesignificance of the icon？（）
    A

    It indicates that the radio of the client adapter is disabled

    B

    It indicates that the client adapter is not associated to an access point or another client

    C

    It indicates that the client adapter is associated to an access point or another client， but the user is not EAP authenticated

    D

    It indicates that the client adapter is associated to an access point or another client， that the user is authenticated if the client adapter is configured for EAP authentication， and that the signal strength is excellent or good

    E

    It indicates that the client adapter is associated to an access point or another client， that the user is authenticated if the client adapter is configured for EAP authentication， and that the signal strength is fair

    F

    It indicates that the client adapter is associated to an access point or another client， that the user is authenticated if the client adapter is configured for EAP authentication， and that the signal strength is poor


    正确答案： F
    解析： 暂无解析

  • 第17题：

    多选题
    Under which three conditions does a client initiate roaming between wireless cells in the Company  WLAN？ （）
    A

    The access point has broadcast too many SSIDs.

    B

    The wireless client has missed too many beacons from the access point.

    C

    The maximum data retry count， initiated by the wireless client， is exceeded.

    D

    The wireless client has reduced the data rate.

    E

    The access point has requested client reauthentication.

    F

    The wireless client has missed too many IAPP （Inter Access Point Protocol） updates.


    正确答案： D,C
    解析： 暂无解析

  • 第18题：

    单选题
    It might be the world’s most widely distributed email client, but Microsoft has confirmed that it has no _______ of further developing Outlook Express.
    A

    willingness

    B

    readiness

    C

    intention

    D

    demonstration


    正确答案： D
    解析：
    微软公司拥有世界上最广泛的电子邮件客户，但微软证实他们不打算进一步的开发这种电子软件。intention意图，目的。willingness意愿。readiness准备就绪。demonstration示范，实证。

  • 第19题：

    单选题
    On a Cisco Aironet 802.11 a/b/g wireless LAN client adapter，the status LED and activity LED are alternating on and off. What does this indicate？（）
    A

    The client card has failed.

    B

    The client card is not associated to the network.

    C

    The driver has been installed incorrectly.

    D

    The client card has awakened from power-save mode.


    正确答案： A
    解析： 暂无解析

相关内容