Which install method should be used to recycle an LPAR without retaining any information from its original configuration？（）  A、MigrationB、PreservationC、New and Complete OverwriteD、Alternate disk installation

第1题：

A client is experiencing issues after cloning an LPAR using alt_disk_install. DLPAR functions are not available for the new LPAR. Also, there is a lot of network traffic to the HMC. What is the most probable cause of this problem?（）

• A、DLPAR functions are not available for cloned partitions
• B、The new partition has the same node number as the original LPAR
• C、Additional filesets need to be reinstalled after the alt_disk_install cloning
• D、The speed and duplex settings on the Ethernet adapter on the new LPAR is misconfigured

第2题：

You plan to install Windows 7 on a computer that contains a single hard disk drive. The hard disk drive isconnected to a RAID controller. During the installation, you discover that the Windows 7 installation mediadoes not include the files required to install the RAID controller. You need ensure that you can installWindows 7 on the hard disk drive.  What should you do?（）

• A、Insert the Windows installation media and press F8 during the computer s power-on self test (POST).
• B、Insert the Windows installation media and press F6 during the computer s power-on self test (POST).
• C、Start the computer from the Windows installation media. From the Install Windows dialog box, click Load Driver.
• D、Start the computer from the Windows installation media. From the Install Windows dialog box, click Drive options (advanced).

第3题：

Which of the following should be done during a Windows server OS installation to install third party drivers for a storage array controller？（）

• A、 Use recovery console from Windows setup.
• B、 Have the manufacturer’s driver disk in the floppy drive and Windows will install it automatically.
• C、 Press F6 when prompted during the setup utility.
• D、 Run setup using the appropriate installation wizard.

第4题：

Which of the following commands should be used to obtain information about the software packages available on the installation media？（）

• A、 lsattr
• B、 inutoc
• C、 installp
• D、 lsresource

第5题：

In a three-disk volume group, a disk was physically removed from the system without performing any software procedures to properly remove the disk. Which of the following commands should be performed to recover from this error?（）

• A、extendvg
• B、cfgmgr
• C、reducevg
• D、varyoffvg

第6题：

New AIX systems arrive without a CDROM drive. All systems do not have the system hardware configuration. Which of the following options is the most appropriate way to install AIX on the systems?（）

• A、Install CDROM drives or tape drives on the systems because that is the only way to install AIX.
• B、Install one system. Take a mksysb from the first system and resotre the mksysb to the remaining systems.
• C、Install one system. Mirror rootvg onto a disk from each of the remaining systems.
• D、Setup and NIM master and resources.

第7题：

Which of the following commands should be used to show the percentage of time that any given disk was busy？（）

• A、 ps
• B、 tprof
• C、 iostat
• D、 vmstat

第8题：

A customer has a pSeries that needs to be upgraded from AIX Version 5.1 to AIX Version 5.2. The customer wants to retain /etc/passwd. Which of the following installation types should be used？（）

• A、Preservation Install
• B、Retention Install
• C、Overwrite Install
• D、Migration Install

第9题：

Which two statements are true about using the isUserInRole method to implement security in a Java EEapplication？（）

• A、It can be invoked only from the doGet or doPost methods.
• B、It can be used independently of the getRemoteUser method.
• C、Can return "true" even when its argument is NOT defined as a valid role name in the deployment descriptor.
• D、Using the isUserInRole method overrides any declarative authentication related to the method in which it is invoked.

第10题：

You have a computer that runs Windows XP Professional. The computer has multiple FAT32- formatted partitions. You install a new disk drive. You create a new FAT32-formatted partition in the new disk drive. You need to mount the new partition as a folder in drive C. What should you do?（） 

• A、Convert the C partition to NTFS. From Disk Management, modify the drive path of the new partition.
• B、Convert the new partition to NTFS. From Disk Management, modify the drive path of the C partition.
• C、Upgrade all disks to dynamic disks. From Diskpart, set the new partition as Active. Add an entry to the boot.ini file. 
• D、Upgrade all disks to dynamic disks. From Diskpart, clear all configuration information for the new disk. Add an entry to the boot.ini file. 

第11题：

第12题：

第13题：

You are installing Windows 2000 Professional on 100 MPS compliant computers. You have created an image of this computer and copied the image to two test computers， which have two processors installed on them. When you run the test computers， you find out that the second processor on both the computers is not being used. What should you do to enable the second processor？（）

• A、On your original machine use Device Manager/Computer/Properties/Drivers/Update Driver to  install the correct multiprocessor HAL. 
• B、On the original computer, through the Add New Hardware, select the processor from the  device list and install the required processor. 
• C、Download the patch from the motherboard manufacturer to allow the configuration of dual  processors. 
• D、Reinstall Windows 2000 Professional on both the test computers.

第14题：

A system has a TCPIP issue that is a known problem. The newest code from the support website has been downloaded to resolve the issue. Which of the following commands should be used to install the new code?（）

• A、smitty install_commit
• B、installp -ugV
• C、installp -aX
• D、instfix -all

第15题：

A customer has an entry level Power System that is currently partitioned and managed by a Hardware Management Console （HMC）. For operational reasons， it must be disconnected from the HMC and configured as a new development system.  How should the customer proceed to implement PowerVM Express and Integrated Virtualization Manager （IVM） on this Power System？ （）

• A、 Install a VIO server as an additional partition and DLPAR the resources from the existing partition to the VIO server.
• B、 Create a service partition and install a VIO server. This will automatically move resources to the VIO server on reboot of the managed system.
• C、 Delete all the existing LPARs， create a new LPAR and assign all the system resources to this LPAR and then install the VIO server on this LPAR.
• D、 Reset the machine to Manufacturing Default Configuration and install the VIO server on the resulting partition created， which will own all system resources.

第16题：

Which installation method enables the quickest recovery in the event of failure when upgrading from AIX 5.3 to AIX 6.1？（）

• A、Use alt_disk_install.
• B、Apply the upgrade without commit.
• C、Use a backup image from a NIM server.
• D、Use a mksysb image from a locally attached DVD-RAM.

第17题：

A System p adminstrator must recover user information from a system that will not successfully boot. Which of the following install methods will accomplish this （）

• A、Preservation
• B、Migration
• C、New and complete overwrite
• D、Repair

第18题：

A client will be creating partitions on multiple systems with identical configurations. What is the recommended method for cloning the master partition?（）

• A、Create a mksysb backup of the original and restore it to the new partitions
• B、Use NIM to load the additional partitions from an image of the original partition
• C、Create alt_disk_install clones of the original partition and assign the target disks to the new partitions
• D、Use the split mirror function to split off additional copies of the original partition and assign them to the other partitions

第19题：

A system administrator needs to quickly migrate a machine from AIX 5.1 to AIX 5.2. The administrator will only be allowed enough downtime to reboot the machine. Which installation method should be used to accomplish this task？（）

• A、Perform a migration installation during the reboot process.
• B、Perform an alternate disk installation and migration using NIM.
• C、Copy the /usr directory from another 5.2 server to this server.
• D、Perform an update_all install from 5.2 media to take effect on reboot.

第20题：

A production system needs to be upgraded from AIX V5.1 to AIX V5.2. All logs and users need to be saved. Which installation method will accomplish the upgrade？（）

• A、Update Installation
• B、Migration Installation
• C、Preservation Installation
• D、New and Complete Overwrite Installation

第21题：

You completed the development of a new application and want to create a new domain in a new environment for functional testing. You want to have the same settings for your new domain as your old domain, with the option of changing the configuration in the new target environment. Which two actions should you execute?（）

• A、Use the introspect () command in WLST to gather the configuration information from the  original domain.
• B、Use pack/unpack to transfer the domain from one machine to another.
• C、Create a domain template from the original domain using the Domain Template Builder and use  the Configuration Wizard to create a new domain from the template.
• D、Use the Admin Console of the original domain to create a domain template from the original  domain and use the Configuration Wizard to create a new domain from the template.

第22题：

You have a server that runs Windows Server 2008. The server has the Windows Server virtualization role service installed and has one virtual machine. The virtual machine runs Windows Server 2008. You plan to install a new application on the virtual machine.  You need to ensure that you can restore the virtual machine to its original state in the event the application installation fails. What should you do？（）

• A、Log on to the virtual host and enable the Remote Differential Compression Features.
• B、Log on to the virtual host and enable the Windows Recovery Disk feature.
• C、From Virtualization Management Console， create a snapshot.
• D、From Virtualization Management Console， save the state of the virtual machine.

第23题：