Which of the following is a true statement when promiscuous mode is enabled on an Integrated Virtual Ethernet？（）A、 The physical port can be used as part of a Shared Ethernet Adapter （SEA）.B、 All physical ports on the Host Ethernet Adapter （HEA） default to

题目

Which of the following is a true statement when promiscuous mode is enabled on an Integrated Virtual Ethernet？（）

  • A、 The physical port can be used as part of a Shared Ethernet Adapter （SEA）.
  • B、 All physical ports on the Host Ethernet Adapter （HEA） default to promiscuous mode.
  • C、 Multiple logical ports can be assigned to a physical port if that logical port is in promiscuous mode.
  • D、 All physical ports that belong to the same port group will be set to promiscuous mode on the Host Ethernet Adapter （HEA）.
相似考题

1.Which of the following options applies to virtual Ethernet devices（）A、A virtual Ethernet adapter can only connect to other partitions within the same system.B、A virtual Ethernet  adapter needs  to be connected to an external VLAN  capable switch to be able to communicate with other partitions on the same system.C、A partition can support an unlimited number of virtual Ethernet devices.D、A virtual Ethernet adapter in the VIO Server that is part of a SEA should not have the "trunk flag" set

2. An administrator has a Power 570 in default configuration with a 4 port 1 Gbps Integrated Virtual Ethernet （IVE） adapter. A new application requires that the MCS value for the first port group of the IVE adapter be set to 1.  If this change is made what is the maximum number of logical ports， across both port groups，  that the IVE adapter can provide？ （）A、 4B、 16C、 20D、 32

3. A customer is planning on having a single Virtual I/O Server (VIOS) configuration in a Power 750. They haveselected a 4-port 1Gb Integrated Virtual Ethernet (IVE). There will be no other network cards installed in the system. One IVE logical port will be used in the VIO Server and will be used as the physicalport in a Shared Ethernet Adapter (SEA). What is the maximum number of IVE logical ports available to use inother LPARs?（）A、1B、7C、15D、31

4. A customer has a requirement to eliminate single points of failure for an application.  They have allocated one Ethernet adapter to each VIO server on the system. Which features of PowerVM and AIX will support the customer requirement？（）A、Etherchannel and trunkingB、Network Interface Backup and EtherchannelC、Shared Ethernet Adapter （SEA） Failover and EtherchannelD、Network Interface Backup and Shared Ethernet Adapter failover

更多“Which of the following is a true statement when promiscuous mode is enabled on an Integrated Virtual Ethernet？（）A、 The physical port can be used as part of a Shared Ethernet Adapter （SEA）.B、 All physical ports on the Host Ethernet Adapter （HEA） default to”相关问题

  • 第1题：

    A customer is planning to buy a two enclosure Power 770, and will implement 4 LPARs with the following requirements:Each LPAR must have a private, dedicated connection to the network.The adapter for this network connection must be hot-swappable.The customer wants to minimize the number of I/O slots used. Which of the following fulfills the customer requirements?（）

    • A、Two dual-port PCIe adapters
    • B、A four-port PCIe Ethernet adapter
    • C、Four separate PCIe Ethernet adapters
    • D、Two embedded Integrated Virtual Ethernet adapters (IVE)

    正确答案:C

  • 第2题：

    A customer has a 4-core POWER6 570 with 4 partitions and a 2-port 1Gbps Integrated Virtual Ethernet (IVE) Adapter. They are having problems with throughput on the Ethernet adapter and want to improve performance. Which of the following solutions will help the customer with this issue for the least cost and with the least interruption?（）

    • A、Order a 2-port 1Gbps Ethernet LAN adapter.
    • B、Order a 2-port 10Gbps Ethernet LAN adapter.
    • C、Upgrade the IVE adapter to a 4-port 1Gbps IVE adapter.
    • D、Upgrade the IVE adapter to a 2-port 10Gbps IVE adapter.

    正确答案:A

  • 第3题：

    When creating a Virtual Ethernet adapter， which of the following steps is done FIRST？（）

    • A、Generate a unique MAC address.
    • B、Run cfgmgr to create device special files.
    • C、Create a virtual device with "smitty vlan".
    • D、Add a virtual Ethernet adapter to the partition profile.

    正确答案:D

  • 第4题：

    The administrator of a Power 595 server is required to concurrently host LPARs for two different customers. Both customers’ LPARs have the same VLAN ID and subnet range， but their traffic must be isolated from each other.  Which feature within the system would provide this functionality？（）

    • A、 802.1Q
    • B、 Virtual switch
    • C、 Logical Host Ethernet （LHE） Adapter
    • D、 Shared Ethernet Adapter （SEA） Trunking

    正确答案:B

  • 第5题：

    An administrator has a Power 570 in default configuration with a 4 port 1 Gbps Integrated Virtual Ethernet (IVE) adapter. A new application requires that the MCS value for the first port group of the IVE adapter be set to 1. If this change is made, what is the maximum number of logical ports, across both port groups, that the IVE adapter can provide?（）

    • A、 4 
    • B、 16 
    • C、 20 
    • D、 32

    正确答案:C

  • 第6题：

    Which of the following allows the user to have two separate Ethernet networks share the same network adapter？（）

    • A、VLAN tags
    • B、EtherChannel
    • C、Virtual Ethernet
    • D、Shared Ethernet Adapter

    正确答案:A

  • 第7题：

    单选题
    When creating a Virtual Ethernet adapter， which of the following steps is done FIRST？（）
    A

    Generate a unique MAC address.

    B

    Run cfgmgr to create device special files.

    C

    Create a virtual device with smitty vlan.

    D

    Add a virtual Ethernet adapter to the partition profile.


    正确答案： C
    解析： 暂无解析

  • 第8题：

    单选题
    A customer has a 4-core POWER6 570 with 4 partitions and a 2-port 1Gbps Integrated Virtual Ethernet (IVE) Adapter. They are having problems with throughput on the Ethernet adapter and want to improve performance.  Which of the following solutions will help the customer with this issue for the least cost and with the least interruption?（）
    A

    Order a 2-port 1Gbps Ethernet LAN adapter.

    B

    Order a 2-port 10Gbps Ethernet LAN adapter.

    C

    Upgrade the IVE adapter to a 4-port 1Gbps IVE adapter.

    D

    Upgrade the IVE adapter to a 2-port 10Gbps IVE adapter.


    正确答案： B
    解析： 暂无解析

  • 第9题：

    单选题
    When configuring a dual port gigabit Integrated Virtual Ethernet adapter (IVE), what value must be assigned to Multiple Core Scaling (MCS) to enable 8 logical ports in total? （）
    A

    2

    B

    4

    C

    8

    D

    16


    正确答案： A
    解析： 暂无解析

  • 第10题：

    单选题
    Which of the following options applies to virtual Ethernet devices（）
    A

    A virtual Ethernet adapter can only connect to other partitions within the same system.

    B

    A virtual Ethernet  adapter needs  to be connected to an external VLAN  capable switch to be able to communicate with other partitions on the same system.

    C

    A partition can support an unlimited number of virtual Ethernet devices.

    D

    A virtual Ethernet adapter in the VIO Server that is part of a SEA should not have the trunk flag set


    正确答案： C
    解析： 暂无解析

  • 第11题：

    单选题
    A customer has a requirement to eliminate single points of failure for an application.  They have allocated one Ethernet adapter to each VIO server on the system. Which features of PowerVM and AIX will support the customer requirement？（）
    A

    Etherchannel and trunking

    B

    Network Interface Backup and Etherchannel

    C

    Shared Ethernet Adapter （SEA） Failover and Etherchannel

    D

    Network Interface Backup and Shared Ethernet Adapter failover


    正确答案： B
    解析： 暂无解析

  • 第12题：

    单选题
    A technical specialist defined a virtual Ethernet ent2 on the VIO server that has a physical  adapter， ent0. Which of the following commands should be used to configure the Shared Ethernet  Adapter？（）
    A

    mkvdev -sea ent2 -vadapter ent0 -default ent0 -defaultid 1

    B

    mkdev -virtual ent0 -adapter ent3 -default en2 -defaultid 1

    C

    mkvdev -sea ent0 -vadapter ent2 -default ent2 -defaultid 1

    D

    mkvdev ent0 -sea -vadapter ent2 -default ent2 -defaultid 1


    正确答案： D
    解析： 暂无解析

  • 第13题：

    When configuring a dual port gigabit Integrated Virtual Ethernet adapter (IVE), what value must be assigned to Multiple Core Scaling (MCS) to enable 8 logical ports in total? （）

    • A、2
    • B、4
    • C、8
    • D、16

    正确答案:A

  • 第14题：

    What type of configuration can provide the best availability in a Virtual IO Server environment?（）

    • A、Provide multiple paths to all resources through 2 or more Virtual IO Servers
    • B、Mirror all disk resources on the Virtual IO Server to present to the client LPAR
    • C、Mirror all disk resources on the client LPAR to the shared SCSI on the Virtual IO Server
    • D、Trunk multiple Ethernet adapters on the Virtual IO Server to a single Shared Ethernet Adapter （SEA）

    正确答案:A

  • 第15题：

    Company.com has two POWER5 servers. They want the two servers’ virtual Ethernets to appear on the same IP subnet. Which of the following will connect the client virtual Ethernet adapters to the physical Ethernet switch connecting the two servers？（）

    • A、Configure a Shared Ethernet Adapter on the Virtual I/O Server.
    • B、Use the same virtual LAN ID on each LPAR.
    • C、Set up IP routing through an LPAR on each system.
    • D、Set up an IP firewall through an LPAR on each system.

    正确答案:A

  • 第16题：

    A technical specialist defined a virtual Ethernet ent2 on the VIO server that has a physical  adapter， ent0. Which of the following commands should be used to configure the Shared Ethernet  Adapter？（）

    • A、mkvdev -sea ent2 -vadapter ent0 -default ent0 -defaultid 1
    • B、mkdev -virtual ent0 -adapter ent3 -default en2 -defaultid 1
    • C、mkvdev -sea ent0 -vadapter ent2 -default ent2 -defaultid 1
    • D、mkvdev ent0 -sea -vadapter ent2 -default ent2 -defaultid 1

    正确答案:C

  • 第17题：

    Company.com has a VIO server with a configured virtual Ethernet adapter and a physical Ethernet adapter with an IP address on their local public network. They want to re-configure the physical Ethernet adapter as Shared Ethernet Adapter. When the mkvdev command is run， the following method error is returned： /usr/lib/methods/cfgsea . Which of the following will most likely resolve the problem？（）

    • A、Run cfgdev on the VIO server and re-run the mkvdev command.
    • B、Run chdev -a sea_enable=yes on the physical Ethernet adapter.
    • C、Remove and re-add the virtual Ethernet adapter.
    • D、Remove the IP address from the physical adapter and re-run the mkvdev command.

    正确答案:D

  • 第18题：

    When configuring Shared Ethernet Adapter （SEA） failover between two VIO servers，  which of the following attributes must have a different value on both VIO servers？（）

    • A、 HA Mode
    • B、 Trunk priority
    • C、 Control Channel
    • D、 Default VLAN ID

    正确答案:B

  • 第19题：

    单选题
    Company.com has a VIO server with a configured virtual Ethernet adapter and a physical Ethernet adapter with an IP address on their local public network. They want to re-configure the physical Ethernet adapter as Shared Ethernet Adapter. When the mkvdev command is run， the following method error is returned： /usr/lib/methods/cfgsea . Which of the following will most likely resolve the problem？（）
    A

    Run cfgdev on the VIO server and re-run the mkvdev command.

    B

    Run chdev -a sea_enable=yes on the physical Ethernet adapter.

    C

    Remove and re-add the virtual Ethernet adapter.

    D

    Remove the IP address from the physical adapter and re-run the mkvdev command.


    正确答案： D
    解析： 暂无解析

  • 第20题：

    单选题
    A customer is planning on having a single Virtual I/O Server (VIOS) configuration in a Power 750. They haveselected a 4-port 1Gb Integrated Virtual Ethernet (IVE). There will be no other network cards installed in the system. One IVE logical port will be used in the VIO Server and will be used as the physicalport in a Shared Ethernet Adapter (SEA). What is the maximum number of IVE logical ports available to use inother LPARs?（）
    A

    1

    B

    7

    C

    15

    D

    31


    正确答案： B
    解析： 暂无解析

  • 第21题：

    单选题
    An administrator has a Power 570 in default configuration with a 4 port 1 Gbps Integrated Virtual Ethernet （IVE） adapter. A new application requires that the MCS value for the first port group of the IVE adapter be set to 1.  If this change is made what is the maximum number of logical ports， across both port groups，  that the IVE adapter can provide？ （）
    A

     4

    B

     16

    C

     20

    D

     32


    正确答案： C
    解析： 暂无解析

  • 第22题：

    单选题
    When configuring Shared Ethernet Adapter （SEA） failover between two VIO servers，  which of the following attributes must have a different value on both VIO servers？（）
    A

     HA Mode

    B

     Trunk priority

    C

     Control Channel

    D

     Default VLAN ID


    正确答案： B
    解析： 暂无解析

  • 第23题：

    单选题
    Company.com has two POWER5 servers. They want the two servers’ virtual Ethernets to appear on the same IP subnet. Which of the following will connect the client virtual Ethernet adapters to the physical Ethernet switch connecting the two servers？（）
    A

    Configure a Shared Ethernet Adapter on the Virtual I/O Server.

    B

    Use the same virtual LAN ID on each LPAR.

    C

    Set up IP routing through an LPAR on each system.

    D

    Set up an IP firewall through an LPAR on each system.


    正确答案： B
    解析： 暂无解析

相关内容