An administrator has setup three partitions using shared pool with 2 processing units. They are activated in the following sequence: Partition one: Min. = 1.0, max = 2.0, desired = 1.5 Partition two: Min. = 1.0, max = 2.0, desired = 1.0 Partition three: 

第1题：

Company.com wants to create four partitions on a pSeries p5-570 8-way with one SCSI PCI adapter connected to an external LTO tape drive. The partitions are to be created from an existing system image backup tape.  Which of the following actions will enable the creation of the partitions with minimal intervention？（）

• A、Install a VIO partition to share the tape drive.
• B、Purchase three external SCSI adapters and physically move the tape drive when needed.
• C、Create the partition definitions with the SCSI adapter as a desired resource and use DLPAR commands to move the tape drive.
• D、Create the partition definitions with the SCSI adapter as a required resource for all partitions and use DLPAR commands to move the tape drive.

第2题：

A database administrator wants to design a multi-partition database that can take advantage of both intra-partition parallelism and inter-partition parallelism. Which configuration will allow the use of these types of parallelism while using the least number of hardware components (servers, processors)? （）

• A、one server having at least two processors  
• B、two servers having one processor and one logical database partition  
• C、one server having four processors and two logical database partitions  
• D、two servers each having four processors and two logical database partitions

第3题：

The workload requirement for a Web server running in Micro-Partitioned p5-550 has increased 300 percent over the past six months. The initial partition definitions assigned 0.5 processing units and one virtual processor to the Web server partition. Three months previously， an additional 0.5 CPU was added to the Web server partition. When the technical specialist attempted to allocate a further 0.5 CPU to this partition， no additional performance was achieved. Which of the following actions would most likely resolve the problem？（）

• A、Add another virtual Ethernet.
• B、Change the partition to be uncapped.
• C、Change the number of virtual processors to 2.
• D、Increase the amount of memory assigned to the partition by 300 percent.

第4题：

Company.com has a single pSeries server with two shared processor logical partitions. The first partition has peak resource requirements during weekdays. The second partition has peak resource requirements during weekends. During the peak times， the total workload between the partitions does NOT exceed the capacity of the server. However， the partitions are not able to utilize the full capacity of the system during peak times， because the necessary CPU and memory resources are not always allocated to the busiest partition. Which of the following options would best balance these resources？（）

• A、Configure AIX Workload Manager
• B、Configure Partition Load Manager
• C、Configure eServer Workload Manager
• D、Use DLPAR from the HMC

第5题：

Company.com has purchased a 2-way p5-520 and would like to create three Micro-Partitions on the server. Which feature of Advanced POWER Virtualization would allow them to create the desired number of partitions？（）

• A、Virtual Ethernet
• B、Shared Ethernet Adapter
• C、Dedicated Processors
• D、Shared Processor Pool

第6题：

A customer has an HMC-managed Power Systems server with 6 partitions. Four production partitions are subject to varying workloads throughout the day, and two are used for development and testing. The production applications have different licensing limitations on the number of physical cores that may be used. The development partitions can use no more than 1 core. The customer would like to dynamically optimize processor utilization within the licensing limits, with minimal operator intervention. Which of the following meets the customer requirement?（）

• A、Define the production partitions' maximum CPU to the licensing limitations.  Define the development/test partition maximums to one core. Configure each partition to be capped.
• B、Define the production partitions' maximum CPU to the licensing limitations.  Define the development/test partition maximums to one core. Configure each partition to be uncapped.
• C、Define the production partitions' maximum CPU to the licensing limitations.  Define the development/test partitions to use no more than one core. Configure the HMC scheduler to  dynamically assign processors among the pools over a day.
• D、Create a shared processor pool for each production partition, with the maximum processor limit set to the  licensing limit for the application in the pool. Assign the development and testing partitions to a processor  pool with a maximum of 1 core. Configure each partition to use uncapped processing.

第7题：

An administrator has installed 1 VIO Server and 5 client LPARs on a 16-core Power 570 with the following CPU requirements： Virtual Processors Processing Units Min Desired Max Min Desired Max VIOS1 1 2 4 0.1 1.0 2.0 LPAR1 4 4 4 4.0 4.0 4.0 LPAR2 2 5 8 1.0 5.0 6.0 LPAR3 1 3 4 0.1 0.3 1.0 LPAR4 3 6 9 0.5 3.0 6.0 LPAR5 1 3 6 1.0 3.0 .06 If the administrator activates the LPARs in the above order，  what will be the result？ （）

• A、 All LPARs will start except LPAR5.
• B、 All LPARs will start with desired capacity.
• C、 All LPARs will start but LPAR5 will have its minimum capacity assigned.
• D、 All LPARs will start but LPAR5 will have less than its desired capacity.

第8题：

A company plans to deploy a two-enclosure, 23-core Power 780 system with AIX, IBM i and Linux in the following configuration: 3 AIX partitions with dedicated network and disk adapters; 1 native IBM i partition acting as a host; 1 hosted IBM i partition; 2 hosted Linux partitions.  Which configuration will provide boot disk capability to all partitions?（）

• A、Use dual-split backplane in both enclosures for the three AIX partitions and the IBM i partition.
• B、Put each partition on a dedicated controller using the triple-split backplane option in both enclosures.
• C、Use the triple-split backplane option in one enclosure for the AIX partitions, and the default dual-split backplane for the IBM i partition in the second enclosure.
• D、Use the triple-split backplane option in one enclosure for the AIX partitions, and the non-split backplane mode in the second enclosure for the IBM i hosting partition.

第9题：

Company.com is having trouble installing a fresh AIX image onto a newly defined partition on a p5-520. The assignment of the adapters to the each of the partitions is as follows： Fibre Channel Card 01 - partition one - required  Fibre Channel Card 02 - partition one - required  SCSI adapter 01 - partition one - desired  IDE adapter 01 - partition one - required  Ethernet adapter 01 - partition one - required  Ethernet adapter 01 - partition two - required  SCSI adapter 02 - partition two - required  IDE adapter 01 - partition two - desired  Which of the following actions will enable the installation of the AIX image？（）

• A、Change the IDE adapter from desired to required in partition two and restart the partition to release the resource.
• B、Purchase a SCSI DVD-ROM drive to connect to the SCSI adapter in partition two.
• C、Purchase an LTO tape drive so that a system image backup can be created to install a new AIX partition.
• D、Change the IDE adapter from required to desired in partition one and restart the partition to release the resource.

第10题：

第11题：

第12题：

第13题：

Companycom has the following: 8 x 1.65GHz CPUs 16GB Memory 4 LPARs LPAR 1: Test/Dev 1 CPU, 2GB Memory, 1 Fibre Channel HBA, AIX 5.3 LPAR 2: QA 1 CPU, 2GB Memory, 1 Fibre Channel HBA, AIX 5.3 LPAR 3: Prod 3 CPUs, 6GB Memory, 1 Fibre Channel HBA, AIX 5.3 LPAR 4: Web App 3 CPUs, 6GB Memory, 1 Fibre Channel HBA, SUSE Linux Utilization over a 30 day period LPAR 1: Average utilization was 15%, Peak utilization was 100% LPAR 2: Average utilization was 25%, Peak utilization was 100% LPAR 3: Average utilization was 50%, Peak utilization was 90% LPAR 4: Average utilization was 35%, Peak utilization was 100% If the customer has a requirement for all four LPARs moved to a p5 590 and to have dedicated CPU resources. Which of the following would best describe the profile requirements?（）

• A、LPARs 1 and 2, SMT on, min CPU 1.0, max CPU 1.0, desired CPU 1.0 LPARs 3 and 4, SMT on, min CPU 1.0, max CPU 3.0, desired CPU 2.0 
• B、LPARs 1 and 2, SMT on, min CPU 1.0, max CPU 1.0, desired CPU 1.0 LPARs 3 and 4, SMT on, min CPU 2.0, max CPU 3.0, desired CPU 3.0 
• C、LPARs 1 and 2, SMT on, min CPU 1.0, max CPU 3.0, desired CPU 3.0 LPARs 3 and 4, SMT on, min CPU 1.0, max CPU 3.0, desired CPU 2.0 
• D、LPARs 1 and 2, SMT off, min CPU 1.0, max CPU 1.0, desired CPU 1.0 LPARs 3 and 4, SMT off, min CPU 1.0, max CPU 3.0, desired CPU 3.0

第14题：

Company.com has recently added a partition to an existing p5-550 4-way with 8GB RAM. When the newly-created third partition is started， it fails to initialize. The configuration of the partitions is as follows：  LPAR Min CPU Des CPU Max CPU  P1 0.8 1.4 2.0  P2 0.8 1.4 2.0  P3 1.4 1.6 2.0 Which of the following actions will most likely resolve the problem？（）

• A、Reduce P3 max CPU to 1.8
• B、Reduce min CPU on P3 to 1.2.
• C、Recommend the purchase of additional CPU.
• D、Ensure that partition 3 has a minimum of 4GB of memory.

第15题：

An administrator is creating a new logical partition (LPAR) with 6 virtual processors and 4 processing units. This LPAR must have the highest priority in the shared processor pool. Which weight should be assigned to this LPAR?（）

• A、 0
• B、 1
• C、 255
• D、 256

第16题：

A customer is installing an HMC-managed Power 720 with two partitions, one for Production the other for Testing. They plan to use the Testing partition only occasionally and want to minimize hardware. Which of the following meets these requirements?（）

• A、Create a system profile for each partition. Assign all needed resources as 'required'.
• B、Define all system resources as 'desired' on the Testing partition. Activate only as needed.
• C、Create two shared processor pools. Assign the minimal I/O resources required for each partition to the shared pools.
• D、Create both partitions with minimal 'required' resources, and optional resources as 'desired'. Activate each partition as necessary.

第17题：

A customer wants to run DB2 on a Power 780 with uncapped partitions. They have licensed DB2 for 32 of the 64 active cores， and will use it in multiple partitions.   How can the customer ensure that the number of licenses purchased for DB2 is not exceeded？（）

• A、Create a 32-core shared processor pool for the DB2 partitions.
• B、Limit the number of virtual processors on each DB2 partition to 32.
• C、Use the IBM License Metric Tool to dynamically manage DB2 usage in the partitions.
• D、Set the ‘Desired Processing Units’ in each DB2 partition profile so that the sum of all partitions equals 32.

第18题：

A company plans to deploy a two-enclosure, 23-core Power 780 system with AIX, IBM i and Linux in thefollowing configuration: 3 AIX partitions with dedicated network and disk adapters; 1 native IBM i partition acting as a host1 hosted IBM i partition; 2 hosted Linux partitions. Which configuration will provide boot disk capability to all partitions?（）

• A、Use dual-split backplane in both enclosures for the three AIX partitions and the IBMi partition.
• B、Put each partition on a dedicated controller using the triple-split backplane option in both enclosures.
• C、Use the triple-split backplane option in one enclosure for the AIX partitions, and the default dual-split  backplane for the IBMi partition in the second enclosure.
• D、Use the triple-split backplane option in one enclosure for the AIX partitions, and the non-split backplane  mode in the second enclosure for the IBMi hosting partition.

第19题：

The System Administrator has set up shared processors on three partitions in the p5 590 system. The shared processors have been set to uncapped. The system administrator notices that the logical partition is acting like it is capped. What is the most probable cause?（）

• A、The uncapped weight has been set to 0.
• B、The uncapped weight has been set to 128.
• C、The processing unit for that partition was set to .1 processing units. A full processor was  assigned.
• D、The processing unit for that partition was set to 0.50 processing units. A full processor was assigned.

第20题：

A system administrator is implementing a new 2-way POWER5 server with APV that is to be divided into three partitions. The application groups have requested the following CPU entitlements for the partitions：  Partition 1： min = 1.0， max = 2.0， desired = 1.5  Partition 2： min = 1.0， max = 2.0， desired = 1.0  Partition 3： min = 0.1， max = 1.0， desired = 0.8  The administrator immediately finds that the three partitions cannot be started in order to run concurrently.  What changes can be made to entitlement configuration to allow all three partitions to be started in order？（）

• A、Change the max on Partition 1 to 1.5.
• B、Change the desired on Partition 1 to 1.0.
• C、Change the max and desired on Partition 1 and 2 to 1.0.
• D、Change the min and desired on Partition 1 and 2 to 0.9.

第21题：

You need to configure a new computer to dual-boot to the following operating systems：  Microsoft Windows XP Professional Microsoft Windows Vista  Which two procedures should you perform？ （）

• A、Create two partitions. Install Windows XP Professional on the first partition. Boot the computer from the Windows Vista DVD-ROM. Install Windows Vista on the second partition.
• B、Create two partitions. Install Windows Vista on the first partition. Boot from the Windows XP Professional installation CD-ROM. Install Windows XP Professional on the second partition. 
• C、Create one partition. Install Windows XP Professional on the partition. From Windows XP Professional launch the Windows Vista setup utility. Install Windows Vista in the same partition. 
• D、Create two partitions. Install Windows XP Professional on the first partition. From Windows XP Professional launch the Windows Vista setup utility. Install Windows Vista on the second partition.

第22题：

第23题：