Your computer connects to both an ad hoc wireless network and a wired network. You need to allow other wireless clients to access the wired network.  What should you do？ （）A、Set the security type to the No authentication （Open） option.B、Configure the wir

题目

Your computer connects to both an ad hoc wireless network and a wired network. You need to allow other wireless clients to access the wired network.  What should you do？ （）

  • A、Set the security type to the No authentication （Open） option.
  • B、Configure the wired and wireless network adapters as a network bridge.
  • C、Modify the wireless network profile type to the Use all-user profiles only （recommended） option.
  • D、On each wireless client， set the Service Set Identifier （SSID） for a new wireless network to the name of your wired network adapter.
相似考题

1.You are trying to connect directly into the LAN prot of a Ezonexam router. You want to telnet to the local Cisco router using TCP/IP but cannot create a session.What should you do to resolve the problem?A. Use a straight-through cable to connect your computer's COM port to the router's console port.B. Use a crossover cable to connect your computer's COM port to the router's console port.C. Use a straight-through cable to connect your computer's COM port to the router's Ethernet port.D. Use a crossover cable to connect your computer's Ethernet port to the router's Ethernet port.E. Use a rollover cable to connect your computer's Ethernet port to the router's Ethernet port.F. Use a straight-through cable to connect your computer's Ethernet port to the router's Ethernet port.G. None of the above

2.Your computer has a wireless network adapter installed. However, the computer fails to connect to the wireless network. You need to ensure that the computer is able to connect to the wireless network.What should you do?（）A.AB.BC.CD.D

3.Your wireless network is not listed in the Connect to a network window of your computer. You need to connect to your wireless network.Which two actions should you perform?()A.AB.BC.CD.DE.E

4.All client computers on your company network run Windows 7. A computer is unable to connect to network resources. The configuration of the computer is as shown in the following table.You need to ensure that the computer is able to connect to network resources. What should you do?（）A.Change the IP address to 131.107.3.254.B.Change the subnet mask to 255.255.248.0.C.Change the default gateway to 131.107.0.1.D.Change the preferred DNS server to 131.107.3.1.

更多“Your computer connect”相关问题

  • 第1题：

    You are unable to connect your computer to a wireless network projector. The wireless network projector does not appear in the list of available network projectors provided by the Connect to a Network Projector wizard.You need to connect to the network projector.What are two possible ways to achieve this goal?（）

    A.A

    B.B

    C.C

    D.D


    参考答案：C, D

  • 第2题：

    You connect your computer to a wireless network. You discover that this new connection fails to show in the Connect to a network window.You need to view this connection in the Connect to a network window.What should you do?（）

    A.A

    B.B

    C.C

    D.D


    参考答案：D

  • 第3题：

    You install a new hardware router that provides wireless network connectivity between your computer and the Internet. You connect to the router by using a wireless network adapter.Your computer is able to access the Internet but is unable to discover other computers in the local wireless network.You need to configure the wireless connection to allow your computer to discover other computers.What should you do?（）

    A.A

    B.B

    C.C

    D.D


    参考答案：A

  • 第4题：

    You need to connect to your computer by using the Remote Desktop Connection client.Which two actions should you perform?()

    A.A

    B.B

    C.C

    D.D

    E.E


    参考答案：A, C

  • 第5题：

    Can I connect my printer（）your computer?

    Afor

    Bon

    Cto

    Din


    C
    略

  • 第6题：

    Your computer has a wireless network adapter installed. However， the computer fails to connect to the wireless network.  You need to ensure that the computer is able to connect to the wireless network.  What should you do？（）

    • A、Change the Network Category setting of the wireless connection to Public.
    • B、Enable the Internet Connection Sharing feature on the wireless network adapter.
    • C、Rename the wireless network adapter to match the Service Set Identifier （SSID） of the wireless network.
    • D、Configure the wireless network adapter to connect to the appropriate wireless network from the Connect to a network list.

    正确答案:D

  • 第7题：

    You discover audit log entries that report attempts to log on to your computer. You need to be notified of all logon attempts that occur on your computer.  What should you do？（）

    • A、Enable the Problem Reporting feature for all users.
    • B、Configure a custom view to monitor failed logon events on your computer.
    • C、Use the Computer Management console to connect to your computer from another computer and monitor the audit logs.
    • D、In the Event Viewer window， attach a task to a failed logon event. Configure this task to send an e-mail message to your e-mail account.

    正确答案:D

  • 第8题：

    Your portable computer has two 512-MB memory modules installed in the only two memory slots available.  You need to improve the speed of your computer.  What should you do？ （）

    • A、Adjust the processor scheduling to optimize for background services.
    • B、Connect a USB flash drive to the computer. Enable the ReadyBoost feature.
    • C、Configure the virtual memory file to exist on the same drive as the operating system.
    • D、Configure the local security policy setting of the computer to clear the virtual page file upon shutdown.

    正确答案:B

  • 第9题：

    You configure a new SQL Server 2005 computer to use TCP/IP with all default settings. Your corporate policy requires that each server use a firewall. You find that you can connect to the SQL Server instance from the local computer. However， client computers cannot connect to the SQL Server instance.You need to identify the most likely cause of the connection issues. What should you do first？（）

    • A、Ensure that port 1433 is open in your firewall.
    • B、Ensure that port 443 is open in your firewall.
    • C、Ensure that client computers connect by using Shared Memory protocol.
    • D、Ensure that the server is not paused.

    正确答案:A

  • 第10题：

    单选题
    You want to connect your Windows 2000 Professional computer to multiple TCP/IP subnets on your company’s network. Your computer currently has an ISA network adapter installed. You install a second ISA network adapter. After you restart your computer， you notice that the second ISA network adapter is not functioning. What should you do？（）
    A

    Set the driver signing option to block.

    B

    Set the driver signing option to ignore.

    C

    In the computer’s BIOS， reserve an unused IRQ for ISA devices.

    D

    In the Device Manager， configure the second ISA network adapter to use an unused IRQ.


    正确答案： D
    解析： 暂无解析

  • 第11题：

    多选题
    You are unable to connect your computer to a wireless network projector. The wireless network projector does not appear in the list of available network projectors provided by the Connect to a Network Projector wizard.  You need to connect to the network projector.  What are two possible ways to achieve this goal？（）
    A

    Start the Microsoft Windows Media Center Service Launcher service.

    B

    Enable the File and Printer Sharing Windows Firewall exception.

    C

    Connect your computer to the same subnet as the network projector.

    D

    Type the IP address of the network projector in the Connect to a Network Projector wizard.


    正确答案： B,A
    解析： 暂无解析

  • 第12题：

    单选题
    You are attempting to connect to your ISP. You view the status change from Dialing to Verifying user name and password. After several seconds， the status changes to Disconnecting. You are then disconnected from the computer you dialed. You verify that your user name and password are entered correctly. You want to enable your Computer to connect to your ISP correctly. What should you do？ （）
    A

    Configure your connection to enable data encryption.

    B

    Configure your connection to use the UNIX SLIP server.

    C

    Configure your connection to allow unsecured passwords.

    D

    Instruct your ISP to configure your account to support Multilink.


    正确答案： C
    解析： 暂无解析

  • 第13题：

    Your computer is unable to access external names or IP addresses. You need to connect to external Internet resources.What should you do first?()

    A.A

    B.B

    C.C

    D.D


    参考答案：C

  • 第14题：

    Your portable computer has a Virtual Private Network (VPN) connection configured. You need to connect to the VPN.What should you do?()

    A.A

    B.B

    C.C

    D.D


    参考答案：D

  • 第15题：

    A router that performs Network Address Translation (NAT) is installed between your computer and the Internet.The router fails. You connect the computer directly to the Internet.You need to ensure that the computer is connected to the Internet in the most secure manner possible.What should you do?（）

    A.A

    B.B

    C.C

    D.D


    参考答案：B

  • 第16题：

    Remote users are unable to connect to a shared folder on your computer. You need to allow access to the shared folder.What are the two possible ways to achieve this goal?()

    A.A

    B.B

    C.C

    D.D


    参考答案：B, C

  • 第17题：

    Can I connect my printer（）your computer?

    • A、for
    • B、on
    • C、to
    • D、in

    正确答案:C

  • 第18题：

    You are unable to connect your computer to a wireless network projector. The wireless network projector does not appear in the list of available network projectors provided by the Connect to a Network Projector wizard.  You need to connect to the network projector.  What are two possible ways to achieve this goal？（）

    • A、Start the Microsoft Windows Media Center Service Launcher service.
    • B、Enable the File and Printer Sharing Windows Firewall exception.
    • C、Connect your computer to the same subnet as the network projector.
    • D、Type the IP address of the network projector in the Connect to a Network Projector wizard.

    正确答案:C,D

  • 第19题：

    Your computer is part of a workgroup. You share files with other users on the network. You configure exceptions in Microsoft Windows Firewall to allow file sharing. Users report that they are unable to connect to your computer.  You need to ensure that other users are able to access only the shared files.  What should you do？ （）

    • A、Restart the Workstation service on your computer.
    • B、Change all of your TCP port exceptions to UDP port exceptions.
    • C、Ensure parental controls are not configured to block file sharing.
    • D、Clear the Block all incoming connections check box in Windows Firewall.

    正确答案:D

  • 第20题：

    A router that performs Network Address Translation （NAT） is installed between your computer and the Internet.  The router fails. You connect the computer directly to the Internet.  You need to ensure that the computer is connected to the Internet in the most secure manner possible.  What should you do？（）

    • A、Enable the Remote Desktop feature in the System Properties dialog box.
    • B、Configure the network category of your network connection to Public.
    • C、Configure the network category of your network connection to Private.
    • D、Enable the Windows Collaboration Computer Name Registration Service exception in Microsoft Windows Firewall.

    正确答案:B

  • 第21题：

    Your network consists of an Active Directory domain named contoso.com. You have a computer namedcomputer1.contoso.com. Your network is configured to use only IPv6. You need to request that a DNS record be created to enable users to connect to your computer by using the name dev.contoso.com.  Which type of record should you request ?（）

    • A、A
    • B、AAAA
    • C、HINFO
    • D、NAPTR

    正确答案:B

  • 第22题：

    单选题
    You connect your computer to a wireless network. You discover that this new connection fails to show in the Connect to a network window.  You need to view this connection in the Connect to a network window.  What should you do？（）
    A

    Click the Diagnose and repair link.

    B

    Enable the Turn on notification of new networks option.

    C

    Configure the Connect to a network window to show all networks.

    D

    Disable the Connect automatically when this network is in range option， and then enable the Connect even if the network is not broadcasting option.


    正确答案： C
    解析： 暂无解析

  • 第23题：

    单选题
    Can I connect my printer（）your computer?
    A

    for

    B

    on

    C

    to

    D

    in


    正确答案： A
    解析： 暂无解析

  • 第24题：

    多选题
    Your wireless network is not listed in the Connect to a network window of your computer. You need to connect to your wireless network.  Which two actions should you perform？（）
    A

    Right-click and click the Diagnose option in the Connect to a network window.

    B

    Set the security type value to No authentication in the wireless network properties dialog box.

    C

    Click the Manually connect to a wireless network option in the Set up a connection or network window.

    D

    In the Wireless Network properties dialog box， click the Connect even if the network is not broadcasting option.

    E

    Configure the correct IP address， subnet mask， and default gateway for the target network in the wireless network connection properties dialog box.


    正确答案： A,D
    解析： 暂无解析

相关内容