（）assesses the priority of identified risks using their probability of occurring, the corresponding impact on project objectives if the risks do occur, as well as other factors such as the time frame and risk tolerance of the project constraints of cost,

题目

（）assesses the priority of identified risks using their probability of occurring, the corresponding impact on project objectives if the risks do occur, as well as other factors such as the time frame and risk tolerance of the project constraints of cost, schedule, scope, and quality.

  • A、Quantitative Risk Analysis
  • B、Qualitative Risk Analysis
  • C、Enterprise Environmental Factors
  • D、Risk Management Plan
相似考题

1.●（71）assesses the priority of identified risks using their probability of occurring, the corresponding impact on project objectives if the risks do occur, as well as other factors such as the time frame. and risk tolerance of the project constraints of cost, schedule, scope, and quality.（71）A. Quantitative Risk AnalysisB. Qualitative Risk AnalysisC. Enterprise Environmental FactorsD. Risk Management Plan

2.______assesses the priority of identified ri sks using their probability of occurring，the corresponding impact on project objectives if the risks do occur，as well as other factors such as the time frame. and risk tolerance of the project constraints of cost，schedule，scope，and quality．A．Quantitative Risk AnalysisB．Qualitative Risk AnalysisC．Enterprise Environmental FactorsD．Risk Management Plan

3.()是最基本的TCP扫描技术。A、TCP connect()扫描B、TCP SYN扫描C、TCP FIN扫描D、TCP反向ident扫描

4.(iii) assesses TSC in terms of financial performance, competitiveness, service quality, resource utilisation,flexibility and innovation and discusses the interrelationships between these terms, incorporatingexamples from within TSC; and (10 marks)

更多“（）assesses the priority of ident”相关问题

  • 第1题：

    AssumethescopedattributeprioritydoesNOTyetexist.Whichtwocreateandsetnewrequest－scopedattributeprioritytothevalue“medium”?()

    A.${priority=‘medium’}

    B.${requestScope[‘priority’]=‘medium’}

    C.<c：setvar=priority”value=”medium”/>

    D.<c：setvar=”priority”scope=”request”>medium</C：set>

    E.<c：setvar=”priority”value=”medium”scope=”request”/>

    F.<c：setproperty=”priority”scope=”request”>medium</c：set>

    G.<c：setproperty=”priority”value=”medium”scope=”request”/>


    参考答案：D, E

  • 第2题：

    在Quidway中低端交换机上,要修改交换机STP的优先级,所用的命令是()。

    A.[Quidway]stp priority priority

    B.[Quidway]stp port priority priority

    C.[Quidway-Ethernet0/1]stp priority priority

    D.[Quidway-Ethernet0/1]stp port priority priority


    答案：A

  • 第3题：

    当地面管制人员要求飞行人员在空中提供“应答机识别”时，你应（）

    • A、将ATC应答机的功能选择旋钮放“TEST”位
    • B、按ATC应答机上的“IDENT”按钮
    • C、按ATC应答机上的“IDENT”按钮，并保持一会，再松开

    正确答案:C

  • 第4题：

    Which of the following phases assesses the current network infrastructure of a customer（）

    • A、Prepare
    • B、Plan
    • C、Analyze
    • D、Design

    正确答案:B

  • 第5题：

    在Quidway交换机上，要修改交换机STP的优先级，所用的命令是（）

    • A、[Quidway]stp priority priority
    • B、[Quidway]stp port priority priority
    • C、[Quidway-Ethernet0/1]stp priority priority
    • D、[Quidway-Ethernet0/1]stp port priority priority

    正确答案:A

  • 第6题：

    Assume two routers on the same subnet， R1 and R2， both configured for HSRP. R1 has a priority of 120.Which of the following HSRP interface configurations will always result in the R2 becoming the primary？（）

    • A、standby 1 priority 110
    • B、standby 1 priority 120
    • C、standby 1 priority 130
    • D、standby 1 priority 110 preempt
    • E、standby 1 priority 120 preempt
    • F、standby 1 priority 130 preempt

    正确答案:C,F

  • 第7题：

    The following entry has been added to the syslog.conf file: *.emerg;mail,daemon.crit @ sysadmin  Which of the following will result from this entry?（）

    • A、 All messages at the emerg priority level and below from all facilities and messages at the crit priority level and below from the mail and daemon facilities are sent to the TTY of the user sysadmin. 
    • B、 All messages at the emerg priority level and above from all facilities, all messages at any priority level from the mail facility, and all messages at the crit priority level and above from the daemon facilities are sent to the remote host sysadmin. 
    • C、 All messages at the emerg priority level and above from all facilities and messages at the crit priority level and above from the mail and daemon facilities are sent to the remote host sysadmin. 
    • D、 All messages at the emerg priority level and above from all facilities except for the mail facility and messages at the crit priority level and above from the daemon facility are sent to the TTY of the user sysadmin.

    正确答案:C

  • 第8题：

    Assume the scoped attribute priority does NOT yet exist. Which two create and set a new request-scopedattribute priority to the value "medium"？（）

    • A、${priority = ’medium’}
    • B、${requestScope[’priority’] = ’medium’}
    • C、<c：set var="priority" value="medium" />
    • D、<c：set var="priority" scope="request">medium</c：set>
    • E、<c：set var="priority" value="medium" scope="request" />

    正确答案:D,E

  • 第9题：

    当CDU处于IDENT页面时，如何能提出FMCBITE页面：（）

    • A、IDENT——按R6（维护）——维护页面——按L1——FMC BITE页面
    • B、IDENT——按L6——索引页——按R6——FMC BITE页面
    • C、INENT——按L6——索引页——按R6（维护）——按L1——FMC BITE
    • D、DA不对，B和C都对

    正确答案:C

  • 第10题：

    要检查FMC导航数据库的日期需使用：（）。

    • A、NAVDATA页
    • B、POSINIT页
    • C、IDENT页
    • D、PROGRESS页

    正确答案:C

  • 第11题：

    A/TBITE有几个选项（）

    • A、CURRENT STATUS、INFLIGHT FAULTS、INTERACTIVE、IDENT/CONFIG
    • B、CURRENT STATUS、INFLIGHT FAULTS、SENSORS、IDENT/CONFIG
    • C、CURRENT STATUS、INFLIGHT FAULTS、INTERACTIVE、IDENT/CONFIG
    • D、CURRENT STATUS、INFLIGHT FAULTS、INTERACTIVE、RIGGING

    正确答案:A

  • 第12题：

    多选题
    Assume the scoped attribute priority does NOT yet exist. Which two create and set new request-scoped attribute priority to the value “medium”？（）
    A

     ${priority = ‘medium’ } 

    B

    ${requestScope[ ‘priority’ ] = ‘medium’ }

    C

    <c：set var=priority” value=”medium” />

    D

    <c：set var=”priority” scope=”request”>medium</C://set>

    E

    <c：set var=”priority” value=”medium” scope=”request” />

    F

    <c：set property=”priority” scope=”request”>medium</c：set>

    G

    <c：set property=”priority” value=”medium” scope=”request” />


    正确答案： F,G
    解析： 暂无解析

  • 第13题：

    对于VRRP协议,我们把正常情况Master的优先级称为Priority(master),把正常情况下Backup的优先级称为Priority(backup),把监控端口失效时对Master优先级的影响成为Priority(reduced),则它们之间应满足如下关系()。

    A.Priority(master)>Priority(backup)>Priority(master)-Priority(reduced)

    B.Priority(master)

    C.Priority(master)>Priority(backup)>Priority(reduced)

    D.Priority(master)


    答案A

  • 第14题：

    Assumetworoutersonthesamesubnet,R1andR2,bothconfiguredforHSRP.R1hasapriorityof120.WhichofthefollowingHSRPinterfaceconfigurationswillalwaysresultintheR2becomingtheprimary?()

    A.standby1priority110

    B.standby1priority120

    C.standby1priority130

    D.standby1priority110preempt

    E.standby1priority120preempt

    F.standby1priority130preempt


    参考答案：C, F

  • 第15题：

    Router R1 and R2 are both configured for HSRP.  Which two statements about the HSRP priorities  of these two routers are true？（）

    • A、 To assign the HSRP router priority in a standby group， the standby group-number priority  priority-value global configuration command must be used.
    • B、 The default priority of a router is zero （0）.
    • C、 The no standby priority command assigns a priority of 100 to the router.
    • D、 Assuming that preempting has also been configured， the router with the lowest priority in an  HSRP group would become the active router.
    • E、 When two routers in an HSRP standby group are configured with identical priorities， the router  with the highest configured IP address will become the active router.

    正确答案:C,E

  • 第16题：

    If both nodes in a chassis cluster initialize at different times, which configuration example will allow you to ensure that the node with the higher priority will become primary for your RGs other than RG0?（）

    • A、[edit chassis cluster] user@host# show redundancy-group 1 { node 0 priority 200; node 1 priority 150;preempt; }
    • B、[edit chassis cluster] user@host# show redundancy-group 1 { node 0 priority 200; node 1 priority 150; monitoring; }
    • C、[edit chassis cluster] user@host# show redundancy-group 1 { node 0 priority 200; node 1 priority 150; control-link-recovery; }
    • D、[edit chassis cluster] user@host# show redundancy-group 1 { node 0 priority 200; node 1 priority 150; strict-priority; }

    正确答案:A

  • 第17题：

    Each port that is configured to use LACP has an LACP port priority. Which statements are true about LACP port priority？ （）

    • A、 Port priority value can be configured between 1 and 65535.
    • B、 A higher port priority value means a higher priority of LACP.
    • C、 Port priority can be configured so that specific links can be chosen as active links rather than the hot standby links within the port channel.
    • D、 LACP uses the port priority with the port number to form the port identifier.
    • E、 LACP Port priority default value should always be changed

    正确答案:A,C,D

  • 第18题：

    Using the Tivoli Dynamic Workload Console， what are two ways to  change the priority of a job？（）

    • A、 Open the "Set Priority" panel from the job properties.
    • B、 Change the priority of the job stream that contains the job.
    • C、 Select the corresponding action from the Monitor jobs task panel.
    • D、 Open the job stream properties and drill down to the job priority  panel.
    • E、 The priority of a job can only be changed from the Workload  Designer.

    正确答案:A,C

  • 第19题：

    Assume the scoped attribute priority does NOT yet exist. Which two create and set new request-scoped attribute priority to the value “medium”？（） 

    • A、 ${priority = ‘medium’ } 
    • B、 ${requestScope[ ‘priority’ ] = ‘medium’ } 
    • C、 <c：set var=priority” value=”medium” /> 
    • D、 <c：set var=”priority” scope=”request”>medium</C://set> 
    • E、 <c：set var=”priority” value=”medium” scope=”request” /> 
    • F、 <c：set property=”priority” scope=”request”>medium</c：set> 
    • G、 <c：set property=”priority” value=”medium” scope=”request” />

    正确答案:D,E

  • 第20题：

    如何进入维护页面（）

    • A、在地面，从IDENT或INIT/REF页面按压6R键
    • B、在地面或空中，从IDENT或INIT/REF页面按压6R键
    • C、在地面，可以从任何页面按压6R键
    • D、从POS INIT按压6R键

    正确答案:A

  • 第21题：

    FMC维护页面可在___得到:（）

    • A、在地面从IDENT页面进入
    • B、在空中从IDENT页面
    • C、在空中从INIT/REF INDEX页面进入
    • D、在地面从INIT/REF INDEX页面

    正确答案:D

  • 第22题：

    SMYD的件号可从以下哪个BITE菜单得到（）。

    • A、CURRENT STATUS
    • B、INFLIGHT FAULTS
    • C、INTERACTIVE
    • D、IDENT/CONFIG

    正确答案:D

  • 第23题：

    多选题
    Assume the scoped attribute priority does NOT yet exist. Which two create and set a new request-scopedattribute priority to the value "medium"？（）
    A

    ${priority = ’medium’}

    B

    ${requestScope[’priority’] = ’medium’}

    C

    <c：set var=priority value=medium />

    D

    <c：set var=priority scope=request>medium</c：set>

    E

    <c：set var=priority value=medium scope=request />


    正确答案： D,E
    解析： 暂无解析

相关内容