Which term describes a spanning-tree network that has all switch ports in either the blocking or forwarding state?（）A、redundantB、spannedC、provisionedD、converged

题目

Which term describes a spanning-tree network that has all switch ports in either the blocking or forwarding state?（）

  • A、redundant
  • B、spanned
  • C、provisioned
  • D、converged
相似考题

1.When is a switched network that is running the Spanning Tree Protocol considered to be fully converged?A．when all switches have the same BID as the root switchB．when all switches have received the MAC address of each neighboring switchC．when every enabled switch port has been assigned a unique identifierD．when every operating switch port is in either the blocking or forwarding stateE．when all switches are in either client, server, or transparent mode

2.What are the switch and bridge port characteristics of a layer two spanning－tree network that is fully converged?()A. All switch and bridge ports are in the forwarding state.B. All switch and bridge ports are in the stand-by state.C. All switch and bridge ports are assigned as either root or designated ports.D. All switch and bridge ports are in either the forwarding or blocking state.E. All switch and bridge are either blocking or looping.

3.Which term describes a spanning－tree network that has all switch ports in either the blocking or forwarding state?()A. redundantB. spannedC. provisionedD. converged

4.Which statement describes a spanning－tree network that has converged?()A. All switch and bridge ports are in the forwarding state.B. All switch and bridge ports are assigned as either root or designated ports.C. All switch and bridge ports are in either the forwarding or blocking state.D. All switch and bridge ports are either blocking or looping.

更多“Which term describes a spanning-tree network that has all switch ports in either the blocking or forwarding state?（）A、redundantB、spannedC、provisionedD、converged”相关问题

  • 第1题：

    Refer to the exhibit. The output that is shown is generated at a switch. Which three of these statements are true? ()

    A.All ports will be in a state of discarding, learning, or forwarding.

    B.Thirty VLANs have been configured on this switch.

    C.The bridge priority is lower than the default value for spanning tree.

    D.All interfaces that are shown are on shared media.

    E.All designated ports are in a forwarding state.

    F.The switch must be the root bridge for all VLANs on this switch.


    参考答案：A, C, E

  • 第2题：

    Whichtermdescribesaspanning－treenetworkthathasallswitchportsineithertheblockingorforwardingstate?()

    A.redundant

    B.spanned

    C.provisioned

    D.converged


    参考答案：D

  • 第3题：

    You are about to migrate a customer network to use a VSS. Which of these statements is true about a VSS？ （）

    • A、 The VSS switch must be the root bridge for all VLANs and is automatically designated
    • B、 The VSS switch is defined in RFC 4318 as a managed object
    • C、 The PAgP+ or LACP protocols are used to maintain the operational state of the VSS devices
    • D、 A VSS interoperates with a virtual port channel
    • E、 The 802.1Q or ISL protocols are used to maintain the operational state of the VSS devices
    • F、 A VSS increases the size of the spanning-tree domain

    正确答案:C

  • 第4题：

    Which two statements best describe spanning-tree BPDU processing for a blocking port？（）

    • A、BPDUs that enter a blocking port are discarded.
    • B、BPDUs that enter a blocking port are processed.
    • C、Loopguard puts an interface into a loop-inconsistent state when BPDUs stop being received on a blocking port.
    • D、BPDUs are only processed on forwarding ports.

    正确答案:B,C

  • 第5题：

    A switch that is to be added to the production network has been preconfigured （trunks， VLANs， VTP， and STP） and was tested in your lab. After installing the switch into the network， the entire network went down.  What might explain what happened？ （）

    • A、The new switch happened to be running Cisco Catalyst operating system， while the other network switches were running Cisco IOS Software.
    • B、The configuration revision of the new switch was higher than the configuration revision of the production VTP domain.
    • C、The link costs on the new switch are set to a high value， causing all ports on the new switch to go into a forwarding mode and none into blocking mode， thereby causing a spanning-tree loop.
    • D、The ports connecting to the two switches have been configured incorrectly. One side has the command switchport mode access and the other switchport mode trunk.

    正确答案:B

  • 第6题：

    Which statement correctly describes the Cisco implementation of RSTP？ （）

    • A、PortFast， UplinkFast， and BackboneFast specific configurations are ignored in Rapid PVST mode.
    • B、RSTP is enabled globally and uses existing STP configuration.
    • C、Root and alternative ports transition immediately to the forwarding state.
    • D、Convergence is improved by using sub-second timers for the blocking， listening， learning， and forwarding port states.

    正确答案:B

  • 第7题：

    Which term describes a spanning-tree network that has all switch ports in either the blocking or forwarding state?（）

    • A、redundant
    • B、spanned
    • C、provisioned
    • D、converged

    正确答案:D

  • 第8题：

    Which term describes a group of packets sharing common forwarding characteristics?（）

    • A、common forwarding class
    • B、forwarding equivalence class
    • C、equivalent class characteristics
    • D、forwarding class characteristics

    正确答案:B

  • 第9题：

    单选题
    A switch that is to be added to the production network has been preconfigured （trunks， VLANs， VTP， and STP） and was tested in your lab. After installing the switch into the network， the entire network went down.  What might explain what happened？ （）
    A

    The new switch happened to be running Cisco Catalyst operating system， while the other network switches were running Cisco IOS Software.

    B

    The configuration revision of the new switch was higher than the configuration revision of the production VTP domain.

    C

    The link costs on the new switch are set to a high value， causing all ports on the new switch to go into a forwarding mode and none into blocking mode， thereby causing a spanning-tree loop.

    D

    The ports connecting to the two switches have been configured incorrectly. One side has the command switchport mode access and the other switchport mode trunk.


    正确答案： C
    解析： 暂无解析

  • 第10题：

    单选题
    Which term describes a spanning-tree network that has all switch ports in either the blocking or forwarding state?（）
    A

    redundant

    B

    spanned

    C

    provisioned

    D

    converged


    正确答案： D
    解析： 暂无解析

  • 第11题：

    多选题
    Which three statements are possible causes for the "fltAdaptorHostIfLink-down" fault in UCS Manager？ （）
    A

    The fabric interconnect is in the end-host mode， and all uplink ports have failed.

    B

    The server port to which the adapter is pinned has failed.

    C

    A transient error has caused the link to fail.

    D

    The fabric interconnect is in the switch mode， and all uplink ports have failed.

    E

    The link for a network-facing host interface is missing.


    正确答案： D,C
    解析： 暂无解析

  • 第12题：

    单选题
    A port in a redundant topology is currently in the blocking state and is not receiving BPDUs. To ensure that this port does not erroneously transition to the forwarding state，  which command should be configured to satisfy the requirement？（）
    A

    Switch（config）#spanning-tree loopguard default

    B

    Switch（config-if）#spanning-tree bdpufilter

    C

    Switch（config）#udld aggressive

    D

    Switch（config-if）#spanning-tree bpduguard


    正确答案： B
    解析： 暂无解析

  • 第13题：

    Which three statements accurately describe layer 2 Ethernet switches?()

    A.Microsegmentation decreases the number of collisions on the network.

    B.if a switch receives a frame for an unkown destination,it uses ARP to resolve the address.

    C.Spanning Tree Protocol allows switches to automatically share vlan information.

    D.In a properly functioning network with redundant switched paths,each switched aegment will contain one root bridge with all its ports in the forwarding state.All other switches in that broadcast domain will have only one root port.

    E.Establishing vlans increases the number of broadcast domains.

    F.Switches that are configured with vlans make forwarding decisions based on both layer 2 and layer 3 address information.


    参考答案：A, C, E

  • 第14题：

    When is a switched network that is running the Spanning Tree Protocol considered to be fully converged?（）

    • A、when all switches have the same BID as the root switch
    • B、when all switches have received the MAC address of each neighboring switch
    • C、when every enabled switch port has been assigned a unique identifier
    • D、when every operating switch port is in either the blocking or forwarding state
    • E、when all switches are in either client, server, or transparent mode

    正确答案:D

  • 第15题：

    A port in a redundant topology is currently in the blocking state and is not receiving BPDUs. To ensure that this port does not erroneously transition to the forwarding state，  which command should be configured to satisfy the requirement？（）

    • A、Switch（config）#spanning-tree loopguard default
    • B、Switch（config-if）#spanning-tree bdpufilter
    • C、Switch（config）#udld aggressive
    • D、Switch（config-if）#spanning-tree bpduguard

    正确答案:A

  • 第16题：

    Which term describes a spanning-tree network that has all switch ports in either the blocking or forwardingstate？ （）

    • A、redundant
    • B、spanned
    • C、provisioned
    • D、converged

    正确答案:D

  • 第17题：

    Routing convergence time is which of the following？（）

    • A、Time required for a VPN connection to occur
    • B、Time required by protocols to update their forwarding tables after changes have occurred
    • C、Time required for an IDS to detect suspicious software
    • D、Time required by switch ports to update their link status and transition to the forwarding state

    正确答案:B

  • 第18题：

    Which of the following characteristics describe the Root Guard feature？（Choose all that apply.）（）

    • A、The port must be put into forwarding state manually after root-inconsistent state has beencorrected
    • B、A Root Guard port receiving superior BPDU goes into a root-inconsistent state
    • C、A Root Guard port receiving inferior BPDU goes into a root-inconsistent state
    • D、While the port is in a root-inconsistent state no user data is sent across that port
    • E、The port returns to a forwarding state if inferior BPDUs stop
    • F、It should be applied to all switch ports

    正确答案:B,D

  • 第19题：

    Which three statements are possible causes for the "fltAdaptorHostIfLink-down" fault in UCS Manager？ （）

    • A、 The fabric interconnect is in the end-host mode， and all uplink ports have failed.
    • B、 The server port to which the adapter is pinned has failed.
    • C、 A transient error has caused the link to fail.
    • D、 The fabric interconnect is in the switch mode， and all uplink ports have failed.
    • E、 The link for a network-facing host interface is missing.

    正确答案:A,B,C

  • 第20题：

    单选题
    What are the switch and bridge port characteristics of a layer two spanning-tree network that is fully converged?（）
    A

    All switch and bridge ports are in the forwarding state.

    B

    All switch and bridge ports are in the stand-by state.

    C

    All switch and bridge ports are assigned as either root or designated ports.

    D

    All switch and bridge ports are in either the forwarding or blocking state.

    E

    All switch and bridge are either blocking or looping.


    正确答案： B
    解析： 暂无解析

  • 第21题：

    多选题
    Which of the following characteristics describe the Root Guard feature？（Choose all that apply.）（）
    A

    The port must be put into forwarding state manually after root-inconsistent state has beencorrected

    B

    A Root Guard port receiving superior BPDU goes into a root-inconsistent state

    C

    A Root Guard port receiving inferior BPDU goes into a root-inconsistent state

    D

    While the port is in a root-inconsistent state no user data is sent across that port

    E

    The port returns to a forwarding state if inferior BPDUs stop

    F

    It should be applied to all switch ports


    正确答案： C,B
    解析： 暂无解析

  • 第22题：

    单选题
    Which statement describes a spanning-tree network that has converged?（）
    A

    All switch and bridge ports are in the forwarding state.

    B

    All switch and bridge ports are assigned as either root or designated ports.

    C

    All switch and bridge ports are in either the forwarding or blocking state.

    D

    All switch and bridge ports are either blocking or looping.


    正确答案： D
    解析： 暂无解析

  • 第23题：

    单选题
    Which term describes a spanning-tree network that has all switch ports in either the blocking or forwardingstate？ （）
    A

    redundant

    B

    spanned

    C

    provisioned

    D

    converged


    正确答案： C
    解析： 暂无解析

  • 第24题：

    多选题
    Refer to the exhibit. The output that is shown is generated at a switch. Which three of these statements are true? （）
    A

    All ports will be in a state of discarding, learning, or forwarding.

    B

    Thirty VLANs have been configured on this switch.

    C

    The bridge priority is lower than the default value for spanning tree.

    D

    All interfaces that are shown are on shared media.

    E

    All designated ports are in a forwarding state.

    F

    The switch must be the root bridge for all VLANs on this switch.


    正确答案： F,B
    解析： 暂无解析

相关内容