After a client has developed a security policy， what is recommended that they do next？（）A、monitor and respondB、analyze and improveC、secure the networkD、test the system

题目

After a client has developed a security policy， what is recommended that they do next？（）

  • A、monitor and respond
  • B、analyze and improve
  • C、secure the network
  • D、test the system
相似考题

1.A Windows Communication Foundation (WCF) service listens for messages at net.tcp://www.contoso.com/MyService.It has a logical address at http://www.contoso.com/MyService. The configuration for the WCF client is as follows:The generated configuration does not provide enough information for the client to communicate with the server.You need to update the client so that it can communicate with the server. What should you do?（）A. In the client configuration, change the value of the address attribute to net.tcp://www.contoso.com/MyServiceB. In the client configuration, change the value of the address attribute to net.tcp://www.contoso.com/MyService listen=http://www.contoso.com/MyService.C. After instantiating the client and before invoking any service operation, add this line of code. EndpointBehaviors.Add(new EndpointDiscoveryBehavior(){ Enabled = true });D. After instantiating the client and before invoking any service operation, add this line of code. client.Endpoint.Behaviors.Add(new ClientViaBehavior(new Uri("net.tcp://www.contoso.com/IMyService")));

2.Which of these is true of a Layer 3 out－of－band NAS deployment?()A. The NAS acts as a gateway for all Layer 3 traffic.B. Only the MAC address is used to identify the client device.C. User traffic remains on the same VLAN for the duration of the connection.D. After authentication and posture assessment, client traffic no longer passes through the NAS.

3.Which two statements about the Cisco Aironet Desktop Utility （ADU） are true？ （Choose two.）（）  A、 The Aironet Desktop Utility （ADU） can be used to establish the association between the client adapter  and the access point， manage authentication to the wireless network， and enable data encryption.B、 The Aironet Desktop Utility （ADU） and the Microsoft Wireless Configuration Manager can be used at the same time to configure the wireless client adapter.C、 The Aironet Desktop Utility （ADU） can support only one wireless client adapter installed and used at a  time.D、 The Aironet Desktop Utility （ADU） profile manager feature can create and manage only one profile for the wireless client adapter.E、 When the user selects a different profile in the Aironet Desktop Utility （ADU）， the settings for the wireless client adapter are changed only after a reboot.

4.Which three statements are true about memory buffer allocation by a MySQL Server?()A.Global buffers such as the InnoDB buffer pool are allocated after the server starts, and are never freedB.Thread buffers are allocated when a client connects, and are freed when the client disconnectsC.Buffers that are needed for certain operation are allocated when the operation starts, and freed when it endsD.User buffers are allocated at server startup and freed when the user is droppedE.All dynamic buffers that are set with a SET GLOBAL statement immediately get allocated globally, and are never freed

更多“After a client ”相关问题

  • 第1题：

    Using FTP passive mode， after the client opens thecommand channel （port 21） to the FTP server and requests passive mode， what will be the next step？ （）

    • A、 The FTP server sends back an acknowledgment （ACK） to the client
    • B、 The FTP server allocates a port touse for the data channel and transmit that port number to the client
    • C、 The FTP server opens the data channel to the client using the port number indicated by the client
    • D、 The FTP client opens the data channel to the FTP server on Port 20
    • E、 The FTP client opens the datachannel to the FTP server on Port 21

    正确答案:B

  • 第2题：

    A client is having problems connecting remotely after replacing a router. An administrator has just created an action plan. Which of the following is the NEXT step the administrator should perform to resolve this issue?（）

    • A、Implement and test the solution.
    • B、Determine if escalation is necessary.
    • C、Identify the affected areas of the network.
    • D、Identify the results and effects of the solution

    正确答案:A

  • 第3题：

    To control the execution of a server process when it is receiving bad packets from a potentially malicious client, you set the SEC_PROTOCOL_ERROR_FURTHER_ACTION initialization parameter as follows: SQL> ALTER SYSTEM SET SEC_PROTOCOL_ERROR_FURTHER_ACTION = Drop,10; What is the significance of this setting?（）

    • A、It terminates the client connection after 10 bad packets and the client cannot reconnect to the same instance.
    • B、It terminates the client connection after 10 bad packets but the client can still reconnect, and attempt the same operation again.
    • C、It terminates the client connection 10 seconds after receiving a bad packet and the client cannot reconnect to the same instance.
    • D、It terminates the client connection after receiving a bad packet and the client can reconnect to the same instance after 10 minutes.

    正确答案:B

  • 第4题：

    What is a reason for reviewing the user requirements document with the client？（）

    • A、To gain the client’s acceptance of the detailed design
    • B、To verify mutual understanding of project resources
    • C、To verify mutual understanding of the detailed project plan
    • D、To verify mutual understanding of targeted product performance
    • E、To verify mutual understanding of the tests that will be done after the product is completed

    正确答案:D

  • 第5题：

    A system administrator is installing a p5 590 server with an HMC. After pulling the websm client down, it is not possible to connect to the HMC. The HMC can be pinged from the client. Which of the following settings should be verified next?（）

    • A、The routes on the HMC
    • B、The firewall setting of the LAN adapter
    • C、The name resolution protocol on the p5 590 server
    • D、The subnet mask settings on the Ethernet adapters

    正确答案:B

  • 第6题：

    An administrator migrates from AIX 5.3 to AIX 6.1. Upon completion， a client questions why files are missing from /tmp. How should the administrator respond to the client？（）

    • A、Explain that the files never existed in the first place.
    • B、Explain that during a Migration install the /tmp filesystem is overwritten.
    • C、Explain that after a Migration install， all system filesystems will be empty.
    • D、Explain that /tmp is temporary storage and files are automatically removed every 30 days.

    正确答案:B

  • 第7题：

    Your network includes the servers shown in the following table. Server n ame Operating s ystem Role s ervices S erver 1 Windows Server 2008 R2 Standard RDS Licensing S erver 2 Windows Server 2008 R2 Enterprise Remote Desktop Server3 Windows Server 2008 R2 Enterprise Remote Desktop Per-device Remote Desktop Services client access licenses （RDS CALs） are installed on Server1. After you refresh a group of client computers with Windows 7， users on those computers can no longer connect to Server2. You need to ensure that the users can connect to remote applications. What should you do？（）

    • A、From the affected client computers， initiate a Remote Desktop connection to Server1.
    • B、From the affected client computers， initiate a Remote Desktop connection to Server3.
    • C、On the affected client computers， open port 3389 on the Windows Firewall.
    • D、On Server1， revoke the RDS device CALs of the affected client computers.

    正确答案:D

  • 第8题：

    单选题
    What is a reason for reviewing the user requirements document with the client？（）
    A

    To gain the client’s acceptance of the detailed design

    B

    To verify mutual understanding of project resources

    C

    To verify mutual understanding of the detailed project plan

    D

    To verify mutual understanding of targeted product performance

    E

    To verify mutual understanding of the tests that will be done after the product is completed


    正确答案： D
    解析： 暂无解析

  • 第9题：

    单选题
    To control the execution of a server process when it is receiving bad packets from a potentially malicious client, you set the SEC_PROTOCOL_ERROR_FURTHER_ACTION initialization parameter as follows: SQL> ALTER SYSTEM SET SEC_PROTOCOL_ERROR_FURTHER_ACTION = Drop,10; What is the significance of this setting?（）
    A

    It terminates the client connection after 10 bad packets and the client cannot reconnect to the same instance.

    B

    It terminates the client connection after 10 bad packets but the client can still reconnect, and attempt the same operation again.

    C

    It terminates the client connection 10 seconds after receiving a bad packet and the client cannot reconnect to the same instance.

    D

    It terminates the client connection after receiving a bad packet and the client can reconnect to the same instance after 10 minutes.


    正确答案： A
    解析： 暂无解析

  • 第10题：

    单选题
    A system administrator is installing a p5 590 server with an HMC. After pulling the websm client down, it is not possible to connect to the HMC. The HMC can be pinged from the client. Which of the following settings should be verified next?（）
    A

    The routes on the HMC

    B

    The firewall setting of the LAN adapter

    C

    The name resolution protocol on the p5 590 server

    D

    The subnet mask settings on the Ethernet adapters


    正确答案： D
    解析： 暂无解析

  • 第11题：

    单选题
    Using FTP passive mode， after the client opens thecommand channel （port 21） to the FTP server and requests passive mode， what will be the next step？ （）
    A

     The FTP server sends back an acknowledgment （ACK） to the client

    B

     The FTP server allocates a port touse for the data channel and transmit that port number to the client

    C

     The FTP server opens the data channel to the client using the port number indicated by the client

    D

     The FTP client opens the data channel to the FTP server on Port 20

    E

     The FTP client opens the datachannel to the FTP server on Port 21


    正确答案： B
    解析： 暂无解析

  • 第12题：

    单选题
    A client is experiencing issues after cloning an LPAR using alt_disk_install. DLPAR functions are not available for the new LPAR. Also, there is a lot of network traffic to the HMC. What is the most probable cause of this problem?（）
    A

    DLPAR functions are not available for cloned partitions

    B

    The new partition has the same node number as the original LPAR

    C

    Additional filesets need to be reinstalled after the alt_disk_install cloning

    D

    The speed and duplex settings on the Ethernet adapter on the new LPAR is misconfigured


    正确答案： C
    解析： 暂无解析

  • 第13题：

    Which statement correctly describes a wireless client Layer 2 roam from AP1 to AP2 while joined to a multicast stream using Cisco WLC running v5.2?（）

    • A、Client issues an IGMP join after association with AP2, allowing AP2 to request a multicast stream from  Cisco WLC after AP1 issues an IGMP query.
    • B、Client issues an IGMP join after association with AP2, allowing AP2 to request a multicast stream from  Cisco WLC independent of AP1 multicast member status.
    • C、Client resumes multicast after association with AP2,  because multicast information is sent in mobility  exchanges and AP2 is already a member of the multicast group,  provided that another client has  already joined that multicast.
    • D、Client resumes multicast after association with AP2,  because multicast information is sent in mobility  exchanges and AP2 is already a member of the multicast group,  regardless if any other clients have  already joined that multicast.

    正确答案:D

  • 第14题：

    A client is experiencing issues after cloning an LPAR using alt_disk_install. DLPAR functions are not available for the new LPAR. Also, there is a lot of network traffic to the HMC. What is the most probable cause of this problem?（）

    • A、DLPAR functions are not available for cloned partitions
    • B、The new partition has the same node number as the original LPAR
    • C、Additional filesets need to be reinstalled after the alt_disk_install cloning
    • D、The speed and duplex settings on the Ethernet adapter on the new LPAR is misconfigured

    正确答案:B

  • 第15题：

    Which of these is true of a Layer 3 out-of-band NAS deployment？（）

    • A、 The NAS acts as a gateway for all Layer 3 traffic.
    • B、 Only the MAC address is used to identify the client device.
    • C、 User traffic remains on the same VLAN for the duration of the connection.
    • D、 After authentication and posture assessment， client traffic no longer passes through the NAS.

    正确答案:D

  • 第16题：

    After rebooting one Virtual IO （VIO） server in a redundant environment， the following command output from the client partition shows that the path to the shared disk from the rebooted VIO server remains in a failed state.  Vio_client1# lspath Failed hdisk0 vscsi0 Enabled hdisk0 vscsi1 What must the administrator do to ensure that the path is automatically restored when a VIO server is brought back into service？ （）

    • A、 On both VIO servers， modify the inittab making chdev the last command， so that they will start during VIO server reboot.
    • B、 On both VIO servers， change the following parameters and reboot each of them in turn    hcheck_interval =60   hcheck_mode=interactive
    • C、 On client logical partition， modify the inittab making chdev the last command， so that they will start during client partition reboot.
    • D、 On the client logical partition， change the following parameters and reboot the client    hcheck_interval =60   hcheck_mode=interactive

    正确答案:D

  • 第17题：

    Company.com has a p5-570 with an application running on each of three Micro-Partitions. The disk I/O is shared through a VIO server. A technical specialist has been asked to upgrade the VIO  server. Which of the following procedures should be taken to maintain the integrity of the partitions？（）

    • A、Shut down all client partitions before updating the VIO server.
    • B、Disconnect the client partitions from any IP networks before updating the VIO server.
    • C、Update the client partitions to the latest OS maintenance level before updating the VIO Server.
    • D、Update the VIO server while the partitions are running， but reboot each client partition at a convenient time after the update.

    正确答案:A

  • 第18题：

    Which three statements are true about memory buffer allocation by a MySQL Server?（）

    • A、Global buffers such as the InnoDB buffer pool are allocated after the server starts, and are never freed
    • B、Thread buffers are allocated when a client connects, and are freed when the client disconnects
    • C、Buffers that are needed for certain operation are allocated when the operation starts, and freed when it ends
    • D、User buffers are allocated at server startup and freed when the user is dropped
    • E、All dynamic buffers that are set with a SET GLOBAL statement immediately get allocated globally, and are never freed

    正确答案:A,B,C

  • 第19题：

    You are creating a client application and configuring it to call a Windows Communication Foundation (WCF) service.When the application is deployed, it will be configured to send all messages to a WCF routing service. You need to ensure that the application can consume the target service after the application is deployed. What should you do?（）

    • A、In the client application, add a service reference to the router service. In the client binding configuration, specify the address of the router service.
    • B、In the client application, add a service reference to the target service. In the client binding configuration, specify the address of the target service.
    • C、In the client application, add a service reference to the router service. In the client binding configuration, specify the address of the target service.
    • D、In the client application, add a service reference to the target service. In the client binding configuration, specify the address of the router service.

    正确答案:D

  • 第20题：

    单选题
    A client application calls a Windows Communication Foundation (WCF) service with a proxy class that was generated by Visual Studio.The service binding was changed from wsHttpBinding to basicHttpBinding. The method signatures in the service contract are changed.After these changes, the client application receives errors when calling methods on the service.You need to ensure that the client can invoke methods on the service successfully. What should you do?（）
    A

    Update the configuration file to use basicHttpBinding.

    B

    Enable anonymous authentication for the service.

    C

    Copy the configuration file elements under the element from the service back to the client.

    D

    Update the service reference.


    正确答案： D
    解析： 暂无解析

  • 第21题：

    单选题
    A client/server application has been configured to use local naming. The client and server run on separate machines. When the client tries to connect， it receives a TNS error. By carefully examining the environment， a tnsnames.ora is found only on the Oracle server machine， among other things. After copying this tnsnames.ora onto the client machine， the client is able to connect to the server.  Which statement is true？（）
    A

    tnsnames.ora must be on the client machine for local naming. 

    B

    tnsnames.ora must be removed from the server for the connection to work. 

    C

    tnsnames.ora must be on both the client and server machines for local naming. 

    D

    tnsnames.ora is not required for local naming; the problem was not fixed by copying the file to the client.


    正确答案： D
    解析： 暂无解析

  • 第22题：

    单选题
    After the site installation is complete， you should verify the mobility of the VoWLAN device whilewalking the site on an active phone call. Which Cisco WLC or Cisco WCS command is mostbeneficial in determining roaming efficiency？（）
    A

    show {802.11a 802.11b} 2roam statistics 

    B

    show client roam-history 

    C

    show client tsm 802.11a/b/g  

    D

    show client detail 

    E

    show client ap-roam-history 


    正确答案： E
    解析： 暂无解析

  • 第23题：

    单选题
    Which statement correctly describes a wireless client Layer 2 roam from AP1 to AP2 while joined to a multicast stream using Cisco WLC running v5.2?（）
    A

    Client issues an IGMP join after association with AP2, allowing AP2 to request a multicast stream from  Cisco WLC after AP1 issues an IGMP query.

    B

    Client issues an IGMP join after association with AP2, allowing AP2 to request a multicast stream from  Cisco WLC independent of AP1 multicast member status.

    C

    Client resumes multicast after association with AP2,  because multicast information is sent in mobility  exchanges and AP2 is already a member of the multicast group,  provided that another client has  already joined that multicast.

    D

    Client resumes multicast after association with AP2,  because multicast information is sent in mobility  exchanges and AP2 is already a member of the multicast group,  regardless if any other clients have  already joined that multicast.


    正确答案： B
    解析： 暂无解析

相关内容