During startup, the router displays the following error message: boot: cannot open "flash:" What will the router do next?（）A、Because of damaged flash memory， the router will fail the POSTB、It will attempt to locate the IOS from a TFTP server. If this fail

题目

During startup, the router displays the following error message: boot: cannot open "flash:" What will the router do next?（）

  • A、Because of damaged flash memory， the router will fail the POST
  • B、It will attempt to locate the IOS from a TFTP server. If this fails， it will initiate the setup dialog.
  • C、It will attempt to locate the IOS from a TFTP server. If this fails， it will load a limited IOS from ROM
  • D、It will attempt to locate the configuration file from a TFTP server. If this fails， it will initiate the setup dialog.
  • E、It will attempt to locate the configuration file from a TFTP server. If this fails， it will load a limited configuration from ROM
相似考题

1.During startup, router VE1 displays the following error message:boot: cannot open "flash:"What will VE1 do next?A. It will attempt to locate the configuration file from a TFTP server. If this fails, it will initiate the setup dialog.B. It will attempt to locate the IOS from a TFTP server. If this fails, it will load a limited IOS from ROM.C. It will attempt to locate the configuration file from a TFTP server. If this fails, it will load a limited configuration from ROM.D. Because of damaged flash memory, the router will fail the POST.E. It will attempt to locate the IOS from a TFTP server. If this fails, it will initiate the setup dialog.F. None of the above

2.You need to upgrade the IOS of an existing router on your network. The new IOS image is located on a TFTP server that you have set up within the network. What command should you issue in order to download the new IOS version?（）A. Router# copy tftp flashB. Router# copy flash runC. Router(config)# restore flashD. Router(config)# repair flashE. Router#copy flash tftpF. Router# copy start flash

3.When upgrading the IOS image, the network administrator receives the exhibited error message. What could be the cause of this error?()A. The new IOS image is too large for the router flash memory.B. The TFTP server is unreachable from the router.C. The new IOS image is not correct for this router platform.D. The IOS image on the TFTP server is corrupt.E. There is not enough disk space on the TFTP server for the IOS image.

4.During the boot sequence, a Ezonexam 2800 series router needs to locate and load an operating system. What is the default order the router uses to find an operating system?A．ROM, TFTP server, FlashB．Flash, TFTP server, ROMC．Flash, NVRAM, TFTP serverD．Flash, ROM, TFTP serverE．Flash, TFTP server, RAM

更多“During startup, the router displays the following error message: boot: cannot open "flash:" What will the router do next?（）A、Because of damaged flash memory， the router will fail the POSTB、It will attempt to locate the IOS from a TFTP server. If this fail”相关问题

  • 第1题：

    There are no boot system commands in a router configuration in NVRAM.What is the fallback sequence that router will use to find an ios during reload?()

    A. Flash,TFTP server,ROM

    B. Flash,NVRAM,ROM

    C. ROM,NVRAM,TFTP server

    D. NVRAM,TFTP server,ROM

    E. TFTP server,Flash,NVRAM


    参考答案：A

  • 第2题：

    A cisco router is booting and has just completed the POST process.It is now ready to find and load an IOS image.what function does the router perform next?()

    A.It checks the configuration register

    B.It attempts to boot from a TFTP server

    C.It loads the first image file in flash memory

    D.It inspects the configuration file in NVRAM for boot instructions


    参考答案：A

  • 第3题：

    There are no boot system commands in arouter configuration in NVRAM.What is the fallback sequence that router will use to find an ios during reload?()

    A.Flash,TFTPserver,ROM

    B.Flash,NVRAM,ROM

    C.ROM,NVRAM,TFTP server

    D.NVRAM,TFTP server,ROM

    E.TFTP server,Flash,NVRAM


    参考答案：A

  • 第4题：

    There are no boot system commands in a router configuration in NVRAM.What is the fall back sequence that router will use to find an ios during reload?()

    A.Flash，TFTPserver，ROM

    B.Flash，NVRAM，ROM

    C.ROM，NVRAM，TFTPserver

    D.NVRAM，TFTPserver，ROM

    E.TFTPserver，Flash，NVRAM


    参考答案：A

  • 第5题：

    Exhibit: The following are true with one of the TestKing routers: 1) The IOS image in flash is missing 2) No Network connectivity is available. 3) The router fallback IOS image is corrupt. How will this Cisco 2600 series router respond if the conditions listed in the exhibit exist during the boot process?（）

    • A、The router will enter setup mode.
    • B、The router will enter ROM monitor mode.
    • C、The router will enter global configuration mode.
    • D、The boot will hang until an IOS is available.

    正确答案:B

  • 第6题：

    A Cisco router is booting and has just completed the POST process. It is now ready to find and load an IOS  image. What function does the router perform next?（）

    • A、It checks the configuration register.
    • B、It attempts to boot from a TFTP server.
    • C、It loads the first image file in flash memory.
    • D、It inspects the configuration file in NVRAM for boot instructions.

    正确答案:A

  • 第7题：

    There are no boot system commands in a router configuration in NVRAM.What is the fallback sequencethat router will use to find an ios during reload？（）

    • A、Flash，TFTP server，ROM
    • B、Flash，NVRAM，ROM
    • C、ROM，NVRAM，TFTP server
    • D、NVRAM，TFTP server，ROM
    • E、TFTP server，Flash，NVRAM

    正确答案:A

  • 第8题：

    A cisco router is booting and has just completed the POST process.It is now ready to find and load an IOS image.what function does the router perform next？（）

    • A、It checks the configuration register
    • B、It attempts to boot from a TFTP server
    • C、It loads the first image file in flash memory
    • D、It inspects the configuration file in NVRAM for boot instructions

    正确答案:A

  • 第9题：

    Refer to the exhibit. For what two reasons has the router loaded its IOS image from the location that is shown? （）

    • A、Router1 has specific boot system command that instruct it to load IOS from TFTP server.
    • B、Router1 is acting as a TFTP server for other routers.
    • C、Router1 cannot locate a valid IOS image in flash memory.
    • D、Router1 defaulted to ROMMON mode and loaded the IOS image from a TFTP server.
    • E、Cisco routers will first attempt to load a image from TFTP for management purposes.

    正确答案:A,C

  • 第10题：

    单选题
    A Cisco router is booting and has just completed the POST process. It is now ready to find and load an IOS  image. What function does the router perform next?（）
    A

    It checks the configuration register.

    B

    It attempts to boot from a TFTP server.

    C

    It loads the first image file in flash memory.

    D

    It inspects the configuration file in NVRAM for boot instructions.


    正确答案： C
    解析： 暂无解析

  • 第11题：

    单选题
    During startup, the router displays the following error message: boot: cannot open "flash:" What will the router do next（）。
    A

    Because of damaged flash memory, the router will fail the POST.

    B

    It will attempt to locate the IOS from a TFTP server. If this fails, it will initiate the setup dialog.

    C

    It will attempt to locate the IOS from a TFTP server. If this fails, it will load a limited IOS from ROM.

    D

    It will attempt to locate the configuration file from a TFTP server. If this fails, it will initiate the setup dialog.

    E

    It will attempt to locate the configuration file from a TFTP server. If this fails, it will load a limited configuration from ROM.


    正确答案： E
    解析： 暂无解析

  • 第12题：

    单选题
    There are no boot system commands in arouter configuration in NVRAM.What is the fallback sequence that router will use to find an ios during reload?（）
    A

    Flash,TFTPserver,ROM

    B

    Flash,NVRAM,ROM

    C

    ROM,NVRAM,TFTP server

    D

    NVRAM,TFTP server,ROM

    E

    TFTP server,Flash,NVRAM


    正确答案： D
    解析： 暂无解析

  • 第13题：

    Refer to the exhibit. For what two reasons has the router loaded its IOS image from the location that is shown? ()

    A.Router1 has specific boot system command that instruct it to load IOS from TFTP server.

    B.Router1 is acting as a TFTP server for other routers.

    C.Router1 cannot locate a valid IOS image in flash memory.

    D.Router1 defaulted to ROMMON mode and loaded the IOS image from a TFTP server.

    E.Cisco routers will first attempt to load a image from TFTP for management purposes.


    参考答案：A, C

  • 第14题：

    A cisco router is booting and has just completed the POST process.It is now ready to find and load an IOSimage.what function does the router perform next?()

    A.It checks the configuration register

    B.It attempts to boot from a TFTP server

    C.It loads the first image file in flash memory

    D.It inspects the configuration file in NVRAM for boot instructions


    参考答案：A

  • 第15题：

    During startup, the router displays the following error message: boot: cannot open "flash:" What will the router do next()。

    A.Because of damaged flash memory, the router will fail the POST.

    B.It will attempt to locate the IOS from a TFTP server. If this fails, it will initiate the setup dialog.

    C.It will attempt to locate the IOS from a TFTP server. If this fails, it will load a limited IOS from ROM.

    D.It will attempt to locate the configuration file from a TFTP server. If this fails, it will initiate the setup dialog.

    E.It will attempt to locate the configuration file from a TFTP server. If this fails, it will load a limited configuration from ROM.


    参考答案：C

  • 第16题：

    You need to upgrade the IOS of an existing router on your network. The new IOS image is located on a TFTP server that you have set up within the network. What command should you issue in order to download the new IOS version?（）

    • A、Router# copy tftp flash
    • B、Router# copy flash run
    • C、Router(config)# restore flash
    • D、Router(config)# repair flash
    • E、Router#copy flash tftp
    • F、Router# copy start flash

    正确答案:A

  • 第17题：

    When upgrading the IOS image, the network administrator receives the exhibited error message. What could be the cause of this error?（）

    • A、The new IOS image is too large for the router flash memory.
    • B、The TFTP server is unreachable from the router.
    • C、The new IOS image is not correct for this router platform.
    • D、The IOS image on the TFTP server is corrupt.
    • E、There is not enough disk space on the TFTP server for the IOS image.

    正确答案:B

  • 第18题：

    There are no boot system commands in arouter configuration in NVRAM.What is the fallback sequence that router will use to find an ios during reload?（）

    • A、Flash,TFTPserver,ROM
    • B、Flash,NVRAM,ROM
    • C、ROM,NVRAM,TFTP server
    • D、NVRAM,TFTP server,ROM
    • E、TFTP server,Flash,NVRAM

    正确答案:A

  • 第19题：

    A cisco router is booting and has just completed the POST process.It is now ready to find and load an IOSimage.what function does the router perform next?（）

    • A、It checks the configuration register
    • B、It attempts to boot from a TFTP server
    • C、It loads the first image file in flash memory
    • D、It inspects the configuration file in NVRAM for boot instructions

    正确答案:A

  • 第20题：

    There are no boot system commands in a router configuration in NVRAM.What is the fall back sequence that router will use to find an ios during reload？（）

    • A、Flash，TFTPserver，ROM
    • B、Flash，NVRAM，ROM
    • C、ROM，NVRAM，TFTPserver
    • D、NVRAM，TFTPserver，ROM
    • E、TFTPserver，Flash，NVRAM

    正确答案:A

  • 第21题：

    多选题
    Refer to the exhibit. For what two reasons has the router loaded its IOS image from the location that is shown? （）
    A

    Router1 has specific boot system command that instruct it to load IOS from TFTP server.

    B

    Router1 is acting as a TFTP server for other routers.

    C

    Router1 cannot locate a valid IOS image in flash memory.

    D

    Router1 defaulted to ROMMON mode and loaded the IOS image from a TFTP server.

    E

    Cisco routers will first attempt to load a image from TFTP for management purposes.


    正确答案： A,C
    解析： 暂无解析

  • 第22题：

    单选题
    During startup, the router displays the following error message: boot: cannot open "flash:" What will the router do next?（）
    A

    Because of damaged flash memory， the router will fail the POST

    B

    It will attempt to locate the IOS from a TFTP server. If this fails， it will initiate the setup dialog.

    C

    It will attempt to locate the IOS from a TFTP server. If this fails， it will load a limited IOS from ROM

    D

    It will attempt to locate the configuration file from a TFTP server. If this fails， it will initiate the setup dialog.

    E

    It will attempt to locate the configuration file from a TFTP server. If this fails， it will load a limited configuration from ROM


    正确答案： B
    解析： 暂无解析

  • 第23题：

    单选题
    There are no boot system commands in a router configuration in NVRAM. What is the fallback sequence that the router will use to find an IOS during reload?（）
    A

    TFTP server, Flash, NVRAM

    B

    ROM, NVRAM, TFTP server

    C

    NVRAM, TFTP server, ROM

    D

    Flash, TFTP server, ROM

    E

    Flash, NVRAM, ROM


    正确答案： E
    解析： 暂无解析

相关内容