You need to investigate a VTP problem between two Company switches. The lack of which two  prevents VTP information from propagating between switches？（）A、A root VTP serverB、A trunk portC、VTP priorityD、VLAN 1E、None of the other alternatives apply

题目

You need to investigate a VTP problem between two Company switches. The lack of which two  prevents VTP information from propagating between switches？（）

  • A、A root VTP server
  • B、A trunk port
  • C、VTP priority
  • D、VLAN 1
  • E、None of the other alternatives apply
相似考题

1.What must the Ezonexam network administrator do in order to successfully configure a VLAN trunk between two switches named VE1 and VE2? (Select two answer choices)A. Set each end of the trunk line to IEEE 802.1Q encapsulation.B. Set the same VTP management domain name on both switches.C. Set all ports on the two switched as access ports.D. Configure one of the two switches as a VTP server.E. Connect the two switches using a rollover cable.F. Use a router to forward VTP traffic between the VLANs.

2.A new switch is installed in the Ezonexam network. This switch is to be configured so that VLAN information will be automatically distributed to all the other Cisco Catalyst switches in the network.Which of the conditions below have to be met in order for this to occur? (Choose all that apply).A. The switch that will share the VLAN information must be in the VTP Server mode.B. The switches must be in the same VTP domain.C. The switch that will share the VLAN information must be configured as the root bridge.D. The switches must be configured to use the same VTP version.E. The switches must be configured to use the same STP version.F. The switches must be configured to use the same type of ID tagging.G. The switches must be connected over VLAN trunks.

3.The Ezonexam network administrator has issued the "VTP password ezonexam" command on a Cisco device. What is the purpose of this command?A．It allows two VTP servers to exists in the same domain, each configured with different passwordsB．It is the password required when promoting a switch from VTP client mode to VTP server modeC．It is used to access the VTP server to make changes to the VTP configurationD．It is used to validate the sources of VTP advertisements sent between switchesE．None of the above

4.A new switch is being installed in the Ezonexam network and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches. Which of the following must you do to accomplish this? (Choose all that apply).A．You must set each end of the trunk line to IEEE 802.1e encapsulation.B．You must set the same VTP management domain name on both switches.C．You must set all ports on the two switches as access ports.D．You must configure one of the switches as a VTP server.E．You must use a rollover cable to connect the two switches.

参考答案和解析
正确答案:B,D
更多“You need to investigate a VTP problem between two Company switches. The lack of which two  prevents VTP information from propagating between switches？（）A、A root VTP serverB、A trunk portC、VTP priorityD、VLAN 1E、None of the other alternatives apply”相关问题

  • 第1题：

    Ezonexam has implemented the use of the Virtual Trunking Protocol (VTP). Which statement below accurately describes a benefit of doing this?

    A．VTP will allow physically redundant links while preventing switching loops

    B．VTP will allow switches to share VLAN configuration information

    C．VTP will allow a single port to carry information to more than one VLAN

    D．VTP will allow for routing between VLANs

    E．None of the above


    正确答案：B

  • 第2题：

    Which statement describe two of the benefits of VLAN Trunking Protocol?()

    A. VTP allows routing between VLANs.

    B. VTP allows a single switch port to carry information to more than one VLAN.

    C. VTP allows physically redundant links while preventing switching loops.

    D. VTP simplifies switch administration by allowing switches to automatically share VLAN configuration information.

    E. VTP helps to limit configuration errors by keeping VLAN naming consistent across the VTP domain.

    F. VTP enhances security by preventing unauthorized hosts from connecting to the VTP domain.


    参考答案：D, E

  • 第3题：

    A new switch is being installed and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches.Which of the following must you do to accomplish this?（）

    A. You must set each end of the trunk line to IEEE 802.1e encapsulation.

    B. You must set the same VTP management domain name on both switches.

    C. You must set all ports on the two switches as access ports.

    D. You must configure one of the switches as a VTP server.

    E. You must use a rollover cable to connect the two switches.


    参考答案：B, D

  • 第4题：

    A network administrator is explaining VTP configuration to a new technician. What should the network administrator tell the new technician about VTP configuration?()

    A. A switch in the VTP client mode cannot update its local VLAN database.

    B. A trunk link must be configured between the switches to forward VTP updates.

    C. A switch in the VTP server mode can update a switch in the VTP transparent mode.

    D. A switch in the VTP transparent mode will forward updates that it receives to other switches.

    E. A switch in the VTP server mode only updates switches in the VTP client mode that have a higher VTP revision number.

    F. A switch in the VTP server mode will update switches in the VTP client mode regardless of the configured VTP domain membership.


    参考答案：A, B, D

  • 第5题：

    You are using VTP version 2 in your network to transport VLAN information between switches. When adding a switch to the network that has been used in the lab previously， you notice that a lot of the existingVLANs have been deleted or replaced with other names. What can you do to prevent this from happeningin the future， without losing all VTP features that you are using today？（）

    • A、configure a hard-to-guess VTP domain name
    • B、use a hard-to-guess VTP password
    • C、use VTP transparent mode
    • D、implement VTP version 3

    正确答案:D

  • 第6题：

    Which statement accurately describes a benefit provided by VTP（）。

    • A、VTP allows routing between VLANs.
    • B、VTP allows a single port to carry information to more than one VLAN.
    • C、VTP allows physically redundant links while preventing switching loops.
    • D、VTP allows switches to share VLAN configuration information.

    正确答案:D

  • 第7题：

    Which statement accurately describes a benefit provided by VTP?（）

    • A、VTP allows routing between VLANs.
    • B、VTP allows a single port to carry information to more than one VLAN
    • C、VTP allows physically redundant links while preventing switching loops.
    • D、VTP allows switches to share VLAN configuration information.

    正确答案:D

  • 第8题：

    You want to configure switch R1 to propagate VLAN information across the Company network  using VTP. What must be configured on a Cisco switch in order to advertise VLAN information？（）

    • A、VTP mode
    • B、VTP password
    • C、VTP revision number
    • D、VTP pruning
    • E、VTP domain name
    • F、None of the other alternatives apply

    正确答案:E

  • 第9题：

    An 802.1Q trunk is not coming up between two switches. The ports on both switches are configured as "switchport mode desirable." Assuming that there is no physical issue， choose two possible causes.（）

    • A、Incorrect VTP domain
    • B、Incorrect VTP password
    • C、Incorrect VTP mode
    • D、Incorrect VTP configuration revision

    正确答案:A,B

  • 第10题：

    The Company network administrator needs to enable VTP pruning within the Company network. What action should a network administrator take to enable VTP pruning on an entire management  domain？（）

    • A、Enable VTP pruning on any switch in the management domain
    • B、Enable VTP pruning on any client switch in the domain
    • C、Enable VTP pruning on a VTP server in the management domain
    • D、Enable VTP pruning on every switch in the domain
    • E、None of the other alternatives apply

    正确答案:C

  • 第11题：

    多选题
    A new switch is being installed and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches. Which of the following must you do to accomplish this?（）
    A

    You must set each end of the trunk line to IEEE 802.1e encapsulation.

    B

    You must set the same VTP management domain name on both switches.

    C

    You must set all ports on the two switches as access ports.

    D

    You must configure one of the switches as a VTP server.

    E

    You must use a rollover cable to connect the two switches.


    正确答案： E,D
    解析： 暂无解析

  • 第12题：

    多选题
    You need to investigate a VTP problem between two Company switches. The lack of which two  prevents VTP information from propagating between switches？（）
    A

    A root VTP server

    B

    A trunk port

    C

    VTP priority

    D

    VLAN 1

    E

    None of the other alternatives apply


    正确答案： E,C
    解析： 暂无解析

  • 第13题：

    What is the purpose of the command shown below?vtp password Fl0r1da()

    A. It is used to validate the sources of VTP advertisements sent between switches.

    B. It is used to access the VTP server to make changes to the VTP configuration.

    C. It allows two VTP servers to exist in the same domain, each configured with different passwords.

    D. It is the password required when promoting a switch from VTP client mode to VTP server mode.

    E. It is used to prevent a switch newly added to the network from sending incorrect VLAN information to the other switches in the domain.


    参考答案：A

  • 第14题：

    What must an administrator do in order to successfully configure a VLAN trunk between two switches?()

    A. Set each end of the trunk line to IEEE 802.1Q encapsulation.

    B. Set the same VTP management domain name on both switches.

    C. Set all ports on the two switched as access ports.

    D. Configure one of the two switches as a VTP server.

    E. Connect the two switches using a rollover cable.

    F. Use a router to forward VTP traffic between the VLANs.


    参考答案：B, D

  • 第15题：

    To configure the VLAN trunking protocol to communicate VLAN information between two switches, what two requirements must be met?()

    A. Each end of the trunk line must be set to IEEE 802.1E encapsulation.

    B. The VTP management domain name of both switches must be set the same.

    C. All ports on both the switches must be set as access ports.

    D. One of the two switches must be configured as a VTP server.

    E. A rollover cable is required to connect the two switches together.

    F. A router must be used to forward VTP traffic between VLANs.


    参考答案：B, D

  • 第16题：

    Which statement accurately describes a benefit provided by VTP()。

    A.VTP allows routing between VLANs.

    B.VTP allows a single port to carry information to more than one VLAN.

    C.VTP allows physically redundant links while preventing switching loops.

    D.VTP allows switches to share VLAN configuration information.


    参考答案：D

  • 第17题：

    What is the purpose of the command shown below?vtp password Fl0r1da（）

    • A、It is used to validate the sources of VTP advertisements sent between switches.
    • B、It is used to access the VTP server to make changes to the VTP configuration.
    • C、It allows two VTP servers to exist in the same domain, each configured with different passwords.
    • D、It is the password required when promoting a switch from VTP client mode to VTP server mode.
    • E、It is used to prevent a switch newly added to the network from sending incorrect VLAN information to the other switches in the domain.

    正确答案:A

  • 第18题：

    Which two DTP modes will permit trunking between directly connected switches？（）

    • A、dynamic desirable （VTP domain A） to dynamic desirable （VTP domain A）
    • B、dynamic desirable （VTP domain A） to dynamic desirable （VTP domain B）
    • C、dynamic auto （VTP domain A） to dynamic auto （VTP domain A）
    • D、dynamic auto （VTP domain A） to dynamic auto （VTP domain B）
    • E、dynamic auto （VTP domain A） to nonegotiate （VTP domain A）
    • F、nonegotiate （VTP domain A） to nonegotiate （VTP domain B）

    正确答案:A,F

  • 第19题：

    R1 and R2 are switches that communicate via VTP. What is the default VTP advertisement  intervals in Catalyst switches that are in server or client mode？（）

    • A、30 seconds
    • B、5 minutes
    • C、1 minute
    • D、10 seconds
    • E、5 seconds
    • F、None of the other alternatives apply

    正确答案:B

  • 第20题：

    What must an administrator do in order to successfully configure a VLAN trunk between two switches?（）

    • A、Set each end of the trunk line to IEEE 802.1Q encapsulation.
    • B、Set the same VTP management domain name on both switches.
    • C、Set all ports on the two switched as access ports.
    • D、Configure one of the two switches as a VTP server.
    • E、Connect the two switches using a rollover cable.
    • F、Use a router to forward VTP traffic between the VLANs.

    正确答案:B,D

  • 第21题：

    Switch R1 is part of the Company VTP domain. What’s true of VTP Pruning within this domain？（）

    • A、It does not prune traffic from VLANs that are pruning-ineligible
    • B、VLAN 1 is always pruning-eligible
    • C、It will prune traffic from VLANs that are pruning-ineligible
    • D、VLAN 2 is always pruning-ineligible
    • E、None of the other alternatives apply

    正确答案:A

  • 第22题：

    Two Company switches are connected via a trunk using VTP. Which VTP information does a  Catalyst switch advertise on its trunk ports when using VTP？（）

    • A、STP root status
    • B、VTP mode
    • C、Negotiation status
    • D、Management domain
    • E、Configuration revision number

    正确答案:D,E

  • 第23题：

    多选题
    Two Company switches are connected via a trunk using VTP. Which VTP information does a  Catalyst switch advertise on its trunk ports when using VTP？（）
    A

    STP root status

    B

    VTP mode

    C

    Negotiation status

    D

    Management domain

    E

    Configuration revision number


    正确答案： A,C
    解析： 暂无解析

相关内容