which vtp mode will not transport vlan in vtp domain？

题目

which vtp mode will not transport vlan in vtp domain？

相似考题

1.A new Ezonexam switch is installed into an existing LAN and a new VTP trunk is set up with an existing switch. Which VLANs will be allowed on this new trunk?A．All defined VLANs are allowed on the trunk by default.B．Each VLAN, or VLAN range, that is specified with the switchport mode command.C．Each VLAN, or VLAN range, that is specified with the vtp domain command.D．Each VLAN, or VLAN range, that is specified with the vlan database command.E．None of the above

2.What is the purpose of the command shown below?vtp password Fl0r1da()A. It is used to validate the sources of VTP advertisements sent between switches.B. It is used to access the VTP server to make changes to the VTP configuration.C. It allows two VTP servers to exist in the same domain, each configured with different passwords.D. It is the password required when promoting a switch from VTP client mode to VTP server mode.E. It is used to prevent a switch newly added to the network from sending incorrect VLAN information to the other switches in the domain.

3.Which statement describe two of the benefits of VLAN Trunking Protocol?()A. VTP allows routing between VLANs.B. VTP allows a single switch port to carry information to more than one VLAN.C. VTP allows physically redundant links while preventing switching loops.D. VTP simplifies switch administration by allowing switches to automatically share VLAN configuration information.E. VTP helps to limit configuration errors by keeping VLAN naming consistent across the VTP domain.F. VTP enhances security by preventing unauthorized hosts from connecting to the VTP domain.

4.阅读下面的配置信息，将(1)～(4)处空缺的内容填写在相应位置。SW1＞enable (进入特权模式)SW1vlan database (进入VLAN配置子模式)SW1(vlan)vtp server (设置本交换机为Server模式)SW1(vlan)vtp domain (1) (设置域名)SW1(vlan) (2) (启动修剪功能)SW1(vlan)exit (退出VLAN配置模式)SW1show (3) (查看VTP设置信息)VTP Vetsion :2Configuration Revision :0Maximum VLANs supported locrlly :64Number of existing VLANs :1VTP Operating Mode :ServerVTP Domain Name :Server1VTP Pruning Mode :EnableVTP V2 Mode :DisabledVTP Traps Generation :DisabledMD5 digest :0x82 0x6B 0xFB 0x94 0x41 0xEF 0x92 0x30Configuration last modified by 0.0.0.0 at 7-1-05 00:07:51SW2vlan databaseSW2(vlan)vtp domain NULLSW2(vlan) (4)Setting device to VTP CLIENT mode.SW2(vlan)exit

更多“which vtp mode will not transport vlan in vtp domain？”相关问题

  • 第1题：

    A new switch is installed into an existing LAN and a new VTP trunk is set up with an existing switch. Which VLANs will be allowed on this new trunk?()

    A. All defined VLANs are allowed on the trunk by default.

    B. Each VLAN, or VLAN range, that is specified with the switchport mode command.

    C. Each VLAN, or VLAN range, that is specified with the vtp domain command.

    D. Each VLAN, or VLAN range, that is specified with the vlan database command.


    参考答案：C

  • 第2题：

    A network administrator is explaining VTP configuration to a new technician. What should the network administrator tell the new technician about VTP configuration?()

    A. A switch in the VTP client mode cannot update its local VLAN database.

    B. A trunk link must be configured between the switches to forward VTP updates.

    C. A switch in the VTP server mode can update a switch in the VTP transparent mode.

    D. A switch in the VTP transparent mode will forward updates that it receives to other switches.

    E. A switch in the VTP server mode only updates switches in the VTP client mode that have a higher VTP revision number.

    F. A switch in the VTP server mode will update switches in the VTP client mode regardless of the configured VTP domain membership.


    参考答案：A, B, D

  • 第3题：

    A switch is configured as a vtp sever with a domain name of CCNA.Which cisco ios privileged mode command,followed by a reload of the swith,will reset the VTP management domain name of the switch to a NULL value?（）

    A.#vtp domain unset

    B.#delete vlan.dat

    C.#no vtp domain

    D.#vtp domain null


    参考答案：B

  • 第4题：

    Which of these best describes the actions taken when a VTP message is received on a switch configured with the VTP mode "transparent"？（）

    • A、VTP updates are ignored and forwarded out all ports
    • B、VTP updates are ignored and forwarded out trunks only
    • C、VTP updates are made to the VLAN database and are forwarded out trunks only
    • D、VTP updates are ignored and are not forwarded

    正确答案:B

  • 第5题：

    Which three statements about VTP features are true?（）

    • A、When properly configured,VTP minimizes VLAN misconfigurations and configuration inconsistencies
    • B、Each broadcast domain on a switch can have its own unique VTP domain
    • C、VTP works at Layer 3 of the OSI model and requires that a management VLAN IP address be configured.
    • D、When properly configured,VTP maintains VLAN configuration consistency and accelerates trunk link negotiation.
    • E、VTP pruning is used to increase available bandwidth in trunk links
    • F、Client,server,and transparent are valid VTP modes
    • G、To configure a switch to be part of two VTP domains,each domain must have its own passwords

    正确答案:A,E,F

  • 第6题：

    Which two statements correctly describe VTP？（）

    • A、Transparent mode always has a configuration revision number of 0.
    • B、Transparent mode cannot modify a VLAN database.
    • C、Client mode cannot forward received VTP advertisements.
    • D、Client mode synchronizes its VLAN database from VTP advertisements.
    • E、Server mode can synchronize across VTP domains.

    正确答案:A,D

  • 第7题：

    A switch is configured as a vtp sever with a domain name of CCNA.Which cisco ios privileged mode command,followed by are load of the swith,will reset the VTP management domain name of the switch to a NULL value?（）

    • A、#vtp domain unset
    • B、#delete vlan.dat
    • C、#novtp domain
    • D、#vtp domain null

    正确答案:B

  • 第8题：

    A new switch is installed into an existing LAN and a new VTP trunk is set up with an existing switch. Which VLANs will be allowed on this new trunk?（）

    • A、All defined VLANs are allowed on the trunk by default.
    • B、Each VLAN, or VLAN range, that is specified with the switchport mode command.
    • C、Each VLAN, or VLAN range, that is specified with the vtp domain command.
    • D、Each VLAN, or VLAN range, that is specified with the vlan database command.

    正确答案:C

  • 第9题：

    A switch is configured as a vtp sever with a domain name of CCNA.Which cisco ios privileged mode command,followed by a reload of the swith,will reset the VTP management domain name of the switch to a NULL value?（）

    • A、#vtp domain unset
    • B、#delete vlan.dat
    • C、#no vtp domain
    • D、#vtp domain null

    正确答案:B

  • 第10题：

    单选题
    A switch is configured as a vtp sever with a domain name of CCNA.Which cisco ios privileged mode command,followed by are load of the swith,will reset the VTP management domain name of the switch to a NULL value?（）
    A

    #vtp domain unset

    B

    #delete vlan.dat

    C

    #novtp domain

    D

    #vtp domain null


    正确答案： C
    解析： 暂无解析

  • 第11题：

    问答题
    which vtp mode will not transport vlan in vtp domain？

    正确答案： vtp mode off.
    Transparent—VTP transparent switches do not participate in VTP. A VTP transparent switch does not advertise its VLAN configuration and does not synchronize its VLAN configuration based on received advertisements， but transparent switches do forward VTP advertisements that they receive out their trunk ports in VTP Version 2.
    Off （configurable only in CatOS switches）—In the three described modes， VTP advertisements are received and transmitted as soon as the switch enters the management domain state. In the VTP off mode， switches behave the same as in VTP transparent mode with the exception that VTP advertisements are not forwarded.
    解析： 暂无解析

  • 第12题：

    单选题
    Which VTP mode is capable of creating only local VLANs and does not synchronize with other switches in the VTP domain?（）
    A

    client

    B

    dynamic

    C

    server

    D

    static

    E

    transparent


    正确答案： B
    解析： 暂无解析

  • 第13题：

    Which VTP mode is capable of creating only local VLANs and does not synchronize with other switches in the VTP domain?()

    A. client

    B. dynamic

    C. server

    D. static

    E. transparent


    参考答案：E

  • 第14题：

    Which three statements about VTP features are true?()

    A.When properly configured,VTP minimizes VLAN misconfigurations and configuration inconsistencies

    B.Each broadcast domain on a switch can have its own unique VTP domain

    C.VTP works at Layer 3 of the OSI model and requires that a management VLAN IP address be configured.

    D.When properly configured,VTP maintains VLAN configuration consistency and accelerates trunk link negotiation.

    E.VTP pruning is used to increase available bandwidth in trunk links

    F.Client,server,and transparent are valid VTP modes

    G. To configure a switch to be part of two VTP domains,each domain must have its own passwords


    参考答案：A, E

  • 第15题：

    下图中交换机同属一个VTP域。除交换机B外，所有交换机的VLAN配置都与交换机A相同。交换机A和B的VTP工作模式的正确配置是( )。

    A) set vtp mode transparent和set vtp mode server

    B) set vtp mode server和set vtp mode transparent

    C) set vtp mode server和set vtp mode client

    D) set vtp mode server和set vtp mode server


    正确答案：B
    (18)B)【解析】VTP有三种工作模式：VTPServer、VTPClient和VTPTransparent。VTPServer维护该VTP域中所有VLAN信息列表，可以建立、删除或修改VLAN:VTPClient其配置从VIPServer中学到，不能建立、删除和修改VLAN;VTPTransparent相当于一个独立的交换机，不从VTPServer学习VLAN的配置信息，只拥有本设备上自己维护VLAN的信息。选项B)中交换机A通过setvtpmodeserver设置为VTPServer，交换机B通过setvtpmodetransparent设置为VIPTransparent，这样才能满足题目条件。

  • 第16题：

    Assuming the default switch configuration,which approach should you use to configure the extended vlan range(1006 through 4094) on a cisco catalyst 3750 series switch?（）

    • A、Configure the switch to be in VTP client mode.
    • B、Configure the switch to be in VTP domaint mode.
    • C、Configure the switch to be in VTP transparent mode.
    • D、Configure the switch to be in VTPv2.

    正确答案:C

  • 第17题：

    What is the purpose of the command shown below?vtp password Fl0r1da（）

    • A、It is used to validate the sources of VTP advertisements sent between switches.
    • B、It is used to access the VTP server to make changes to the VTP configuration.
    • C、It allows two VTP servers to exist in the same domain, each configured with different passwords.
    • D、It is the password required when promoting a switch from VTP client mode to VTP server mode.
    • E、It is used to prevent a switch newly added to the network from sending incorrect VLAN information to the other switches in the domain.

    正确答案:A

  • 第18题：

    Which two DTP modes will permit trunking between directly connected switches？（）

    • A、dynamic desirable （VTP domain A） to dynamic desirable （VTP domain A）
    • B、dynamic desirable （VTP domain A） to dynamic desirable （VTP domain B）
    • C、dynamic auto （VTP domain A） to dynamic auto （VTP domain A）
    • D、dynamic auto （VTP domain A） to dynamic auto （VTP domain B）
    • E、dynamic auto （VTP domain A） to nonegotiate （VTP domain A）
    • F、nonegotiate （VTP domain A） to nonegotiate （VTP domain B）

    正确答案:A,F

  • 第19题：

    The Company switches are configured to use VTP. What’s true about the VLAN trunking protocol  （VTP）？（）

    • A、VTP messages will not be forwarded over nontrunk links.
    • B、VTP domain names need to be identical. However，case doesn’t matter.
    • C、A VTP enabled device which receives multiple advertisements will ignore advertisements with higher configuration revision numbers.
    • D、A device in "transparent" VTP v.1 mode will not forward VTP messages.
    • E、VTP pruning allows switches to prune VLANs that do not have any active ports associated with  them.

    正确答案:A,D

  • 第20题：

    Which of these best describes the actions taken when a VTP message is received on a switch configuredwith the VTP mode "transparent"？（）

    • A、VTP updates are ignored and forwarded out all ports.
    • B、VTP updates are ignored and forwarded out trunks only.
    • C、VTP updates are made to the VLAN database and are forwarded out trunks only.
    • D、VTP updates are ignored and are not forwarded.

    正确答案:B

  • 第21题：

    Which VTP mode is capable of creating only local VLANs and does not synchronize with other switches in the VTP domain?（）

    • A、client
    • B、dynamic
    • C、server
    • D、static
    • E、transparent

    正确答案:E

  • 第22题：

    单选题
    A switch is configured as a vtp sever with a domain name of CCNA.Which cisco ios privileged mode command,followed by a reload of the swith,will reset the VTP management domain name of the switch to a NULL value?（）
    A

    #vtp domain unset

    B

    #delete vlan.dat

    C

    #no vtp domain

    D

    #vtp domain null


    正确答案： C
    解析： 暂无解析

  • 第23题：

    多选题
    Which two statements correctly describe VTP？（）
    A

    Transparent mode always has a configuration revision number of 0.

    B

    Transparent mode cannot modify a VLAN database.

    C

    Client mode cannot forward received VTP advertisements.

    D

    Client mode synchronizes its VLAN database from VTP advertisements.

    E

    Server mode can synchronize across VTP domains.


    正确答案： B,A
    解析： 暂无解析

相关内容