Which two locations can be configured as a source for the IOS image in the boot system command?（）A、RAMB、NVRAMC、flash memoryD、HTTP serverE、TFTP serverF、Telnet server

题目

Which two locations can be configured as a source for the IOS image in the boot system command?（）

  • A、RAM
  • B、NVRAM
  • C、flash memory
  • D、HTTP server
  • E、TFTP server
  • F、Telnet server
相似考题

1.IOS映像文件通常保存在哪里（）A.RAMB.NVRAMC.SharedD.Flash

2.Which is the correct fallback sequence for loading the Cisco IOS?()A. ROM, Flash, NVRAMB. ROM, TFTP server, FlashC. Flash, TFTP server, ROMD. Flash, NVRAM, RAM

3.You need to upgrade the IOS of an existing router on your network. The new IOS image is located on a TFTP server that you have set up within the network. What command should you issue in order to download the new IOS version?（）A. Router# copy tftp flashB. Router# copy flash runC. Router(config)# restore flashD. Router(config)# repair flashE. Router#copy flash tftpF. Router# copy start flash

4.During the boot sequence, a Ezonexam 2800 series router needs to locate and load an operating system. What is the default order the router uses to find an operating system?A．ROM, TFTP server, FlashB．Flash, TFTP server, ROMC．Flash, NVRAM, TFTP serverD．Flash, ROM, TFTP serverE．Flash, TFTP server, RAM

更多“Which two locations can be configured as a source for the IOS image in the boot system command?（）A、RAMB、NVRAMC、flash memoryD、HTTP serverE、TFTP serverF、Telnet server”相关问题

  • 第1题：

    When upgrading the IOS image, the network administrator receives the exhibited error message. What could be the cause of this error?()

    A. The new IOS image is too large for the router flash memory.

    B. The TFTP server is unreachable from the router.

    C. The new IOS image is not correct for this router platform.

    D. The IOS image on the TFTP server is corrupt.

    E. There is not enough disk space on the TFTP server for the IOS image.


    参考答案：B

  • 第2题：

    Refer to the exhibit. For what two reasons has the router loaded its IOS image from the location that is shown? ()

    A.Router1 has specific boot system command that instruct it to load IOS from TFTP server.

    B.Router1 is acting as a TFTP server for other routers.

    C.Router1 cannot locate a valid IOS image in flash memory.

    D.Router1 defaulted to ROMMON mode and loaded the IOS image from a TFTP server.

    E.Cisco routers will first attempt to load a image from TFTP for management purposes.


    参考答案：A, C

  • 第3题：

    There are no boot system commands in arouter configuration in NVRAM.What is the fallback sequence that router will use to find an ios during reload?()

    A.Flash,TFTPserver,ROM

    B.Flash,NVRAM,ROM

    C.ROM,NVRAM,TFTP server

    D.NVRAM,TFTP server,ROM

    E.TFTP server,Flash,NVRAM


    参考答案：A

  • 第4题：

    Which result is of securing the Cisco IOS image by use of the Cisco IOS image resilience feature？（）

    • A、The Cisco IOS image file will not be visible in the output from the show flash command.
    • B、The show version command will not show the Cisco IOS image file location.
    • C、When the router boots up， the Cisco IOS image will be loaded from a secured FTP location.
    • D、The running Cisco IOS image will be encrypted and then automatically backed up to a TFTP server.

    正确答案:A

  • 第5题：

    When upgrading the IOS image, the network administrator receives the exhibited error message. What could be the cause of this error?（）

    • A、The new IOS image is too large for the router flash memory.
    • B、The TFTP server is unreachable from the router.
    • C、The new IOS image is not correct for this router platform.
    • D、The IOS image on the TFTP server is corrupt.
    • E、There is not enough disk space on the TFTP server for the IOS image.

    正确答案:B

  • 第6题：

    There are no boot system commands in arouter configuration in NVRAM.What is the fallback sequence that router will use to find an ios during reload?（）

    • A、Flash,TFTPserver,ROM
    • B、Flash,NVRAM,ROM
    • C、ROM,NVRAM,TFTP server
    • D、NVRAM,TFTP server,ROM
    • E、TFTP server,Flash,NVRAM

    正确答案:A

  • 第7题：

    Which is the correct fallback sequence for loading the Cisco IOS?（）

    • A、ROM, Flash, NVRAM
    • B、ROM, TFTP server, Flash
    • C、Flash, TFTP server, ROM
    • D、Flash, NVRAM, RAM

    正确答案:C

  • 第8题：

    User defined locale files can be stored in which two locations?（）

    • A、DRAM
    • B、SDRAM
    • C、CME flash，slot0
    • D、CUE flash，slot0
    • E、TFTP directory specified by cnf-file location command

    正确答案:C,E

  • 第9题：

    What is the purpose of the secure boot-config global configuration ？（）

    • A、takes a snapshot of the router running configuration and securely archives it in persistent storage
    • B、stores a secured copy of the Cisco IOS image in its persistent storage
    • C、backs up the Cisco IOS image from flash to a TFTP server
    • D、enables Cisco IOS image resilience

    正确答案:A

  • 第10题：

    Refer to the exhibit. For what two reasons has the router loaded its IOS image from the location that is shown? （）

    • A、Router1 has specific boot system command that instruct it to load IOS from TFTP server.
    • B、Router1 is acting as a TFTP server for other routers.
    • C、Router1 cannot locate a valid IOS image in flash memory.
    • D、Router1 defaulted to ROMMON mode and loaded the IOS image from a TFTP server.
    • E、Cisco routers will first attempt to load a image from TFTP for management purposes.

    正确答案:A,C

  • 第11题：

    多选题
    Which two locations can be configured as a source for the IOS image in the boot system command?（）
    A

    RAM

    B

    NVRAM

    C

    flash memory

    D

    HTTP server

    E

    TFTP server

    F

    Telnet server


    正确答案： B,E
    解析： 暂无解析

  • 第12题：

    单选题
    There are no boot system commands in arouter configuration in NVRAM.What is the fallback sequence that router will use to find an ios during reload?（）
    A

    Flash,TFTPserver,ROM

    B

    Flash,NVRAM,ROM

    C

    ROM,NVRAM,TFTP server

    D

    NVRAM,TFTP server,ROM

    E

    TFTP server,Flash,NVRAM


    正确答案： D
    解析： 暂无解析

  • 第13题：

    There are no boot system commands in a router configuration in NVRAM.What is the fallback sequence that router will use to find an ios during reload?()

    A. Flash,TFTP server,ROM

    B. Flash,NVRAM,ROM

    C. ROM,NVRAM,TFTP server

    D. NVRAM,TFTP server,ROM

    E. TFTP server,Flash,NVRAM


    参考答案：A

  • 第14题：

    A cisco router is booting and has just completed the POST process.It is now ready to find and load an IOS image.what function does the router perform next?()

    A.It checks the configuration register

    B.It attempts to boot from a TFTP server

    C.It loads the first image file in flash memory

    D.It inspects the configuration file in NVRAM for boot instructions


    参考答案：A

  • 第15题：

    Which two locations can be configured as a source for the IOS image in the boot system command?()

    A.RAM

    B.NVRAM

    C.flash memory

    D.HTTP server

    E.TFTP server

    F.Telnet server


    参考答案：C, E

  • 第16题：

    You need to upgrade the IOS of an existing router on your network. The new IOS image is located on a TFTP server that you have set up within the network. What command should you issue in order to download the new IOS version?（）

    • A、Router# copy tftp flash
    • B、Router# copy flash run
    • C、Router(config)# restore flash
    • D、Router(config)# repair flash
    • E、Router#copy flash tftp
    • F、Router# copy start flash

    正确答案:A

  • 第17题：

    A Cisco router is booting and has just completed the POST process. It is now ready to find and load an IOS  image. What function does the router perform next?（）

    • A、It checks the configuration register.
    • B、It attempts to boot from a TFTP server.
    • C、It loads the first image file in flash memory.
    • D、It inspects the configuration file in NVRAM for boot instructions.

    正确答案:A

  • 第18题：

    IOS映像通常保存在哪里？（）

    • A、RAM
    • B、NVRAM
    • C、Shared
    • D、Flash

    正确答案:D

  • 第19题：

    There are no boot system commands in a router configuration in NVRAM.What is the fallback sequencethat router will use to find an ios during reload？（）

    • A、Flash，TFTP server，ROM
    • B、Flash，NVRAM，ROM
    • C、ROM，NVRAM，TFTP server
    • D、NVRAM，TFTP server，ROM
    • E、TFTP server，Flash，NVRAM

    正确答案:A

  • 第20题：

    A cisco router is booting and has just completed the POST process.It is now ready to find and load an IOS image.what function does the router perform next？（）

    • A、It checks the configuration register
    • B、It attempts to boot from a TFTP server
    • C、It loads the first image file in flash memory
    • D、It inspects the configuration file in NVRAM for boot instructions

    正确答案:A

  • 第21题：

    Which two locations can be configured as a source for the IOS image in the boot system command?（）

    • A、RAM
    • B、NVRAM
    • C、flash memory
    • D、HTTP server
    • E、TFTP server
    • F、Telnet server

    正确答案:C,E

  • 第22题：

    When configuring a DHCP server， which of the following can the administrator define for DHCPusers？（）

    • A、 Database server
    • B、 NTP server
    • C、 DHCP server
    • D、 SQL server
    • E、 DNS server
    • F、 Domain name

    正确答案:B,E,F

  • 第23题：

    单选题
    There are no boot system commands in a router configuration in NVRAM. What is the fallback sequence that the router will use to find an IOS during reload?（）
    A

    TFTP server, Flash, NVRAM

    B

    ROM, NVRAM, TFTP server

    C

    NVRAM, TFTP server, ROM

    D

    Flash, TFTP server, ROM

    E

    Flash, NVRAM, ROM


    正确答案： E
    解析： 暂无解析

  • 第24题：

    单选题
    You need to upgrade the IOS of an existing router on your network. The new IOS image is located on a TFTP server that you have set up within the network. What command should you issue in order to download the new IOS version?（）
    A

    Router# copy tftp flash

    B

    Router# copy flash run

    C

    Router(config)# restore flash

    D

    Router(config)# repair flash

    E

    Router#copy flash tftp

    F

    Router# copy start flash


    正确答案： C
    解析： 暂无解析

相关内容