如果在重新启动工程师站，要用Boot Tape来BOOTING工程师站，当出现Diagnostic Disk Program时就（）A、点击[H]键B、按住[H]键C、双击[H]键D、释放[H]键

题目

如果在重新启动工程师站，要用Boot Tape来BOOTING工程师站，当出现Diagnostic Disk Program时就（）

  • A、点击[H]键
  • B、按住[H]键
  • C、双击[H]键
  • D、释放[H]键
相似考题

1.若DCS工程师站及工作站全部停电,应()。A、到现场将控制阀改为副线控制B、改到工程师站进行操作C、重新启动操作系统D、重新启动工程师站

2.DCS工作站停电后,应()。A、保持操作的稳定B、改到工程师站进行操作C、立即停工D、重新启动操作系统

3.A customer asks the sales professional how to update the UEFI on the HX5. They do not want to use AMM. Which is the procedure of the following？（）A、InstallServerGuide CD/DVD,boot the HX5 blade and follow the promptsB、Boot the blade from the HX5 Bootable Media Creator （BoMC） and follow the promptsC、Press F1 while the HX5 is booting，incert the CD/DVD and select "OK"D、Mount the IMM virtual disk

4.若DCS工作站停电,应()。A、将控制阀全部改为手动B、改到工程师站进行操作C、重新启动操作系统D、重新启动工程师站

参考答案和解析
正确答案:B
更多“如果在重新启动工程师站，要用Boot Tape来BOOTING工”相关问题

  • 第1题：

    An AIX server will not boot in normal mode and the server must be booted into maintenance  mode to rebuild the boot logical volume. A NIM master is not defined in this environment.  How is the system booted into maintenance mode to perform this task （）

    • A、Apply power and when the SMS menus appear press 5 repeatedly to enter a maintenance boot automatically. The system will present a maintenance shell eventually.
    • B、Boot media such as CDROM or Tape is required to boot into maintenance mode. When inserted into the proper device the system automatically boots into maintenance mode when it can not boot into normal mode.
    • C、Apply power and the server automatically boots into maintenance mode where you can select your disk to rebuild the boot logical volume.
    • D、Boot media such as CDROM or Tape is required and an administrator must select the proper SMS menus to get into maintenance mode.

    正确答案:D

  • 第2题：

    CENTUMCS3000R3系统中，（）主要用来操作和监视。

    • A、现场控制站FCS
    • B、人机接口站HIS
    • C、工程师站ENG
    • D、实时控制总线Vnet

    正确答案:B

  • 第3题：

    CENTUMCS3000R3系统中，HIS是（），主要用来操作和监视。

    • A、工程师站
    • B、现场控制站
    • C、人机接口站
    • D、实时控制总线

    正确答案:C

  • 第4题：

    A cisco router is booting and has just completed the POST process.It is now ready to find and load an IOS image.what function does the router perform next？（）

    • A、It checks the configuration register
    • B、It attempts to boot from a TFTP server
    • C、It loads the first image file in flash memory
    • D、It inspects the configuration file in NVRAM for boot instructions

    正确答案:A

  • 第5题：

    After applying a new driver to a NIC, the server reboots and fails to restart. Which of the following is the BEST way to resolve the problem?（）

    • A、Boot using recovery console and restore the previous driver.
    • B、Boot the server, press F8 and access last known good configuration.
    • C、Restore the server using last backup tape.
    • D、Boot the server with ASR option.

    正确答案:B

  • 第6题：

    What is the correct procedure to update the UEFI on HX5 with MAX5 blades without using the AMM?（）

    • A、Insert the ServerGuide CD/DVD, boot the HX5 blade and follow the prompts 
    • B、Boot the blade from the HX5 Bootable Media Creator (BoMC) and follow the prompts 
    • C、Press F1 when the HX5 system is booting, select Update UEFI, insert the CD/DVD and select OK
    • D、Mount the IMM virtual disk

    正确答案:B

  • 第7题：

    Which of the following is the correct procedure to update the BIOS on LS42 blades without using the AMM?（）

    • A、Insert the Update eXpress Service Pack Installer (UXSPI) CD, boot the LS42 blade and follow the prompts 
    • B、Boot the blade to the Bootable Media Creator (BoMC) CD and follow the prompts 
    • C、Press F1 when the LS42 system is booting, select Update BIOS, insert the diskette into the diskette drive, and select OK 
    • D、Use the Remote Supervisor Adapter virtual disk

    正确答案:B

  • 第8题：

    单选题
    After applying a new driver to a NIC， the server reboots and fails to restart. Which of the following is the BEST way to resolve the problem？ （）
    A

     Boot using recovery console and restore the previous driver.

    B

     Boot the server， press F8 and access last known good configuration.

    C

     Restore the server using last backup tape.

    D

     Boot the server with ASR option.


    正确答案： A
    解析： 暂无解析

  • 第9题：

    单选题
    An AIX server will not boot in normal mode and the server must be booted into maintenance  mode to rebuild the boot logical volume. A NIM master is not defined in this environment.  How is the system booted into maintenance mode to perform this task （）
    A

    Apply power and when the SMS menus appear press 5 repeatedly to enter a maintenance boot automatically. The system will present a maintenance shell eventually.

    B

    Boot media such as CDROM or Tape is required to boot into maintenance mode. When inserted into the proper device the system automatically boots into maintenance mode when it can not boot into normal mode.

    C

    Apply power and the server automatically boots into maintenance mode where you can select your disk to rebuild the boot logical volume.

    D

    Boot media such as CDROM or Tape is required and an administrator must select the proper SMS menus to get into maintenance mode.


    正确答案： C
    解析： 暂无解析

  • 第10题：

    单选题
    A system administrator has a mksysb on tape of an AIX 5.2 machine and needs to install it on a different server. How can this be accomplished？（）
    A

    Install the base AIX from 5.2 media and then install the mksysb overtop.

    B

    Mount the tape and use the tar command to install AIX and the rest of the contents of the rootvg.

    C

    Insert the mksysb tape and a 5.2 base media CD and then boot to maintenance mode and initiate the install.

    D

    Install AIX 5.2 from base media and then perform an update_all install from the mksysb tape of the original machine.


    正确答案： D
    解析： 暂无解析

  • 第11题：

    单选题
    A cisco router is booting and has just completed the POST process.It is now ready to find and load an IOSimage.what function does the router perform next?（）
    A

    It checks the configuration register

    B

    It attempts to boot from a TFTP server

    C

    It loads the first image file in flash memory

    D

    It inspects the configuration file in NVRAM for boot instructions


    正确答案： B
    解析： 暂无解析

  • 第12题：

    单选题
    When booting the p5 590 server in full system partition mode, which location is preferred for the fastest boot?（）
    A

    A SAN device

    B

    First I/O drawer

    C

    Any I/O drawer within the main frame

    D

    First I/O drawer within the expansion frame


    正确答案： B
    解析： 暂无解析

  • 第13题：

    DCS集中管理部分由（）组成。

    • A、操作站、工程师站、上位机
    • B、操作站、工程师站、现场设备
    • C、操作站、工程师站
    • D、工程师站、上位机

    正确答案:A

  • 第14题：

    从DCS工程师站取下Tape之前必须将Tape Unload，使Tape Driver的灯（）之后，才可以从Tape driver中取出Tape

    • A、发红光
    • B、亮
    • C、发黄光
    • D、灭

    正确答案:D

  • 第15题：

    A cisco router is booting and has just completed the POST process.It is now ready to find and load an IOSimage.what function does the router perform next?（）

    • A、It checks the configuration register
    • B、It attempts to boot from a TFTP server
    • C、It loads the first image file in flash memory
    • D、It inspects the configuration file in NVRAM for boot instructions

    正确答案:A

  • 第16题：

    Which of the following is the BEST solution for repairing a hard drive that results in the Could not readfrom selected boot disk display upon booting？ （）

    • A、Use recovery console and the bootcfg /rebuild command.
    • B、Use recovery console and the chkdsk command.
    • C、Use recovery console and the fixboot command.
    • D、Use recovery console and the fixmbr command.

    正确答案:A

  • 第17题：

    An administrator is attempting to start a server from a bootable Linux disk but instead the server boots into Windows. Which of the following is the MOST likely reason for this?（）

    • A、The system needs to boot to Windows first, prior to booting into Linux.
    • B、The OS settings are not set properly for Linux support.
    • C、The boot order is set incorrectly in the BIOS.
    • D、The Linux disk is not supported in a Windows environment.

    正确答案:C

  • 第18题：

    When booting the p5 590 server in full system partition mode, which location is preferred for the fastest boot?（）

    • A、A SAN device
    • B、First I/O drawer
    • C、Any I/O drawer within the main frame
    • D、First I/O drawer within the expansion frame

    正确答案:B

  • 第19题：

    A technician is booting up a computer but the computer never moves beyond POST. The floppydisk drive light stays lit continuously during the boot process. Which of the following is the MOST likely cause?（）

    • A、The hard drive is not formatted.
    • B、The BIOS is corrupted.
    • C、The motherboard has faulty capacitors.
    • D、The drive cable is backwards

    正确答案:D

  • 第20题：

    单选题
    An administrator is attempting to start a server from a bootable Linux disk but instead the serverboots into Windows. Which of the following is the MOST likely reason for this？（）
    A

     The system needs to boot to Windows first， prior to booting into Linux.

    B

     The OS settings are not set properly for Linux support.

    C

     The boot order is set incorrectly in the BIOS.

    D

     The Linux disk is not supported in a Windows environment.


    正确答案： C
    解析： 暂无解析

  • 第21题：

    单选题
    A Cisco router is booting and has just completed the POST process. It is now ready to find and load an IOS  image. What function does the router perform next?（）
    A

    It checks the configuration register.

    B

    It attempts to boot from a TFTP server.

    C

    It loads the first image file in flash memory.

    D

    It inspects the configuration file in NVRAM for boot instructions.


    正确答案： C
    解析： 暂无解析

  • 第22题：

    单选题
    A cisco router is booting and has just completed the POST process.It is now ready to find and load an IOS image.what function does the router perform next?（）
    A

    It checks the configuration register

    B

    It attempts to boot from a TFTP server

    C

    It loads the first image file in flash memory

    D

    It inspects the configuration file in NVRAM for boot instructions


    正确答案： D
    解析： 暂无解析

  • 第23题：

    单选题
    A technician is booting up a computer but the computer never moves beyond POST. The floppydisk drive light stays lit continuously during the boot process. Which of the following is the MOST likely cause?（）
    A

    The hard drive is not formatted.

    B

    The BIOS is corrupted.

    C

    The motherboard has faulty capacitors.

    D

    The drive cable is backwards


    正确答案： D
    解析： 暂无解析

相关内容